Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

What to use to cut aluminum?

Welcome Guest, Log in or Register
Author 
unioncreek

02-03-2007 12:50:22




Report to Moderator

I'm going to replace the floor of my horse trailer with aluminum deck material. The aluminum is 1 inch thick, not solid. What could I use to cut it. I know I can use my sawzall, but is there a blade I can use on my cirular or table saw that would cut it?

Thanks,
Bobg




[Log in to Reply]   [No Email]
Adam Schuh

02-05-2007 05:11:18




Report to Moderator
 Re: What to use to cut aluminum? in reply to unioncreek, 02-03-2007 12:50:22  
I work at an aluminum foundry and we use bandsaws with carbide tipped blades to cut aluminum up to 3" thick, this is solid. I would think a regular circular saw with a carbide blade would work fine. Like some of the other guys said, keep it lubricated and it will work well.



[Log in to Reply]  [No Email]
derek mcpherson

02-04-2007 13:35:39




Report to Moderator
 Re: What to use to cut aluminum? in reply to unioncreek, 02-03-2007 12:50:22  
yup circular saw with a carbide blade. seen guys
rip 8' (i think) sheets, pretty thick too. Seemed
to work really good. But made a ton chips.



[Log in to Reply]  [No Email]
Bus Driver

02-04-2007 11:07:32




Report to Moderator
 Re: What to use to cut aluminum? in reply to unioncreek, 02-03-2007 12:50:22  
Plasma would be great except that most hand-operated plasma cutters will not do 1" thick.



[Log in to Reply]  [No Email]
135 Fan

02-04-2007 10:00:25




Report to Moderator
 Re: What to use to cut aluminum? in reply to unioncreek, 02-03-2007 12:50:22  
A thin cutting disc made for aluminum in an angle grinder would probably be the fastest and a little easier than a circular saw. They make non- ferrous blades for circular saws but a grinder spins a lot faster. A grinder would also allow you to clean everything up after the initial cuts with a thicker aluminum grinding disc. A plasma torch would work if you could rent one but you'ld need a decent compressor as well. Hope this helps. Dave

[Log in to Reply]  [No Email]
Little Ed

02-03-2007 20:30:04




Report to Moderator
 Re: What to use to cut aluminum? in reply to unioncreek, 02-03-2007 12:50:22  
I cut 1/8 thru 1/2 inch plate plate 6061 Aluminum on average 3 times a week with a cheap 7 1/4" Skill saw with a carbide tooth blade running in the forward direction. I gave 29.95 for the saw and about 10 for the blade. All the writing is worn off of the blade, and it is where I work, so I am depending on my remembery to say I think it is a 40 tooth blade. I keep the cut lubricated with WD 40 from the underside, and use a guide, generally a piece of 3/8 x 2 clamped to whatever I am cutting. Been using the same set-up for over three years now. Wear a face shield and ear plugs and you should be good.

[Log in to Reply]  [No Email]
MaddMatt

02-03-2007 18:41:16




Report to Moderator
 Re: What to use to cut aluminum? in reply to unioncreek, 02-03-2007 12:50:22  
Carbide circular saw blade no problem I've cut 1"x6" aluminum bar stock as fast as I wanted and the blades are cheap under $10



[Log in to Reply]  [No Email]
IH2444

02-03-2007 18:14:34




Report to Moderator
 Re: What to use to cut aluminum? in reply to unioncreek, 02-03-2007 12:50:22  
I saw in an ad that Sear has a circular saw blade for Aluminum. I have not seen or used one though.



[Log in to Reply]  [No Email]
Charles (in GA)

02-03-2007 17:44:14




Report to Moderator
 Re: What to use to cut aluminum? in reply to unioncreek, 02-03-2007 12:50:22  
Honeycomb cored possibly?



[Log in to Reply]  [No Email]
Don L C

02-03-2007 15:45:26




Report to Moderator
 Re: What to use to cut aluminum? in reply to unioncreek, 02-03-2007 12:50:22  
Turn the bladeover in your cut off saw.....so it will be runing back wards..... works great.....



[Log in to Reply]  [No Email]
wyod

02-03-2007 14:59:04




Report to Moderator
 Re: What to use to cut aluminum? in reply to unioncreek, 02-03-2007 12:50:22  
Hey Bob, Sounds like you are planning to use some sort of aluminum extrusion... if so, you can cut it with a table saw or a miter saw (or even a circular saw, as long as you can adequately control the saw). Freud (among others) makes a carbide tipped blade that cuts non-ferrous metals. I have used these blades on miter & table saws extensively with excellent results. For the cleanest cuts, lubricate the blade every 5 or 6 cuts with a wax based blade lube and be SURE to wear protective clothing, ear and EYE protection. HTH... d

[Log in to Reply]  [No Email]
T_Bone

02-03-2007 14:36:03




Report to Moderator
 Re: What to use to cut aluminum? in reply to unioncreek, 02-03-2007 12:50:22  
Hi Bob,

I wouldn't cold cut any thick aluminum, 1/4" plus as it would be slow and burn up a electric tool motor. And between the noise and chip fly I can see a real problem on the nerves on that size of a project. A good cross cut circular saw blade installed backwords works well for cold cutting.

They have a new type of cold cut blade out that's pretty spendy, $100 or so?. I haven't used one.

I think that pretty well leaves you with plasma for cheap hot cutting.

Are you sure that for cost and easy riding of the horses, wood wouldn't be a better choice?

T_Bone

[Log in to Reply]  [No Email]
Charles (in GA)

02-03-2007 14:12:18




Report to Moderator
 Re: What to use to cut aluminum? in reply to unioncreek, 02-03-2007 12:50:22  
One inch thick and NOT solid..... ..... ..

What is this, some kind of runway matting, or some sort of expanded metal? Knowing a little more about it would certainly help.

Charles



[Log in to Reply]  [No Email]
OK-AL

02-03-2007 14:08:05




Report to Moderator
 Re: What to use to cut aluminum? in reply to unioncreek, 02-03-2007 12:50:22  
Do you have a Vo-Tech that has a welding class in your area? If so, drop by and talk to the teacher. Many times Vo-Tech schools will cut or weld material for anyone. Usually ask for only a token payment, or none. It's all good practice for the students. Most good schools have plasma cutters that will rip through the aluminum in no time.

OK-AL



[Log in to Reply]  [No Email]
CBBC

02-03-2007 14:06:01




Report to Moderator
 Re: What to use to cut aluminum? in reply to unioncreek, 02-03-2007 12:50:22  
I"ve never cut 1" alu plate, but I have cut lots of 1/4" and 1/2" plate with the skill saw. Use a carbide blade in the regular direction. Take it slow and don"t bind the saw. Wear eye and ear protection - cover up as much as possible, the chips will fly!

For alu tubing and angle etc I just use my band saw.

Good luck, Grant

[Log in to Reply]  [No Email]
jml755

02-03-2007 13:27:04




Report to Moderator
 Re: What to use to cut aluminum? in reply to unioncreek, 02-03-2007 12:50:22  
I've used a "negative rake" (-5 degrees, I think) to cut extruded aluminum framing components (made by Bosch, Item Products, etc) on my chop saw. KInd of scary the first time you do it. I've cut aluminum siding with an old circular saw blade running backwards. I've never tried it with a carbide blade, though.



[Log in to Reply]  [No Email]
Rod in Smiths Falls, ON,

02-03-2007 13:18:04




Report to Moderator
 Re: What to use to cut aluminum? in reply to unioncreek, 02-03-2007 12:50:22  
The best cutting implement I have seen for aluminum is a regular wood-cutting blade in a band saw. While ABS will ruin a blade in a few cuts, aluminum doesn't seem to hurt it at all.

My 12" compound mitre saw has a no-kickback blade. It doesn't deal with aluminum nearly as well as the regular cross cut type. In fact I lost a couple of teeth on a piece of weather stripping for a door.

With a skill saw the only problem I have seen is the aluminum melting from the heat generated and clogging the teeth -- oh yeah, and the hot particles flying everywhere. The band saw blade clears itself and runs cooler than the circular saw. I haven't noticed any dangerous shrapnel, either.

A friend worked at Alcan in his younger days and he tells of cutting off large chunks of aluminum with a regular chain saw.

I guess the longer and cooler you can keep the blade, the better.

[Log in to Reply]  [No Email]
varmint

02-03-2007 13:15:41




Report to Moderator
 Re: What to use to cut aluminum? in reply to unioncreek, 02-03-2007 12:50:22  
you gonna have to put tenis shoes on th horses



[Log in to Reply]  [No Email]
jhill52

02-03-2007 13:14:48




Report to Moderator
 Re: What to use to cut aluminum? in reply to unioncreek, 02-03-2007 12:50:22  
Harbor Frieght sells a metal cutting circular saw. Some people on the fabricatrion site have bought them and a re happy with them. COst about $50.00 on sale. A table saw runs too fast to use a metal blade. You could of course change pulleys to get the right speed.



[Log in to Reply]  [No Email]
ErnieDD

02-03-2007 12:55:44




Report to Moderator
 Re: What to use to cut aluminum? in reply to unioncreek, 02-03-2007 12:50:22  
Carbide wood blade mounted backwards. I have never tried it, just read about it. Your mileage may vary.

Check out www.finehomebuilding.com

go to breaktime discussion, lower left

I think you have to sign up to peruse the forum.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy