Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

trailer brakes

Welcome Guest, Log in or Register
Author 
Little Ed

12-31-2006 08:02:02




Report to Moderator

I am wanting to get a utility trailer, (they're common as belly buttons around here) but none of them have brakes. Can electric brakes be added to an existing trailer?




[Log in to Reply]   [No Email]
Hobo,NC

12-31-2006 08:56:59




Report to Moderator
 Re: trailer brakes in reply to Little Ed, 12-31-2006 08:02:02  
Sorry to butt in but this goes wif you question. Well I had this on my mine to, I am look�in at a trailer wif no brakes. The axles do have a (guess) 4X4 square flange behind the wheel hub so I would think this izz fer the elec. Brake back�in plate to mount to. I also wuz try�in to siffer out were to install to the front are back axle. The trailer I am look�in at also has Pontiac aluminum wheels so theirs no way to install bearing buddies. $700 fer the trailer ( 6X16 nice trailer factory built square tubeing) then add brakes, tires and steel wheels. Still may be a deal but no title so do I want to go thru the title deal, use a title I have I just don�t know other than if he had a title I would have pulled it home no doubt. I have been thru the wrong title deal, no title deal even tho I purchased it from a honest guy I got the well I did not know it wuz HOT sorry.
I did find the serial # on the toung and it starts wif FLA , (best I remember I did not rite it down) so I would think this trailer wuz titled in Florida and made it to N.C. I called back told�em to git me the # and I will have it run by the DMV, course you know I got the how honest I am part and I don�t doubt that so if you are that honest then lets go thru a title check I will pay yer ask�in price, bet he does not call me back cuzz he knows he may just loose the trailer be�in he�s such a honest guy and all certainly he would want the trailer to go back to its ritefull owner if it wuz HOT are maybe if he�s lucky their will be no record of the title and the DMV will issue a new number and all will be rite wif�it.. Actually I could git around this by applying a mechanics lean to it for towing and storage if it came to that. But then I would fall into the same category as the previous owners how knew it wuz not legal just that they were honest and all so that made�em feel good. �Temptation� its sure izz a nice trailer all that nice new lumber in the floor, hard wood to.

[Log in to Reply]  [No Email]
Coloken

12-31-2006 09:06:45




Report to Moderator
 Re: trailer brakes in reply to Hobo,NC, 12-31-2006 08:56:59  
Don't know if this will help there, but in Colorado it is easy to get a license on a "home made" trailer. You keep all the receipts for the "parts" you buy. like an old junker trailer and brakes etc. so they can tax you for the total. then the state patrol comes out and stampes a number on it. Would depend on the total cost if it is worth it.



[Log in to Reply]  [No Email]
Hobo,NC

12-31-2006 09:43:34




Report to Moderator
 Re: trailer brakes in reply to Coloken, 12-31-2006 09:06:45  
This'in izz not homemade, its factory built. he just called me and told me he sold it, rite nice trailer, least i still have my money and look'in again.



[Log in to Reply]  [No Email]
John T

12-31-2006 08:21:46




Report to Moderator
 Re: trailer brakes in reply to Little Ed, 12-31-2006 08:02:02  
Ed, Been there done that n got the T Shirt. I went to our local trailer n camper dealer n bought the full Dexter brand backing plates with shoes n magnets n springs, the whole deal,,,,, ,,,,, ,bought the flanges to bolt the plates to the axles (square with big round center hole that fit over axles),,,,, ,,mounted up the plates and hubs and adjusted the brakes out tight to hold n center the backing plates to the axle,,,,, ,tack welded the mounts to the axle as they were all in the correct place n centered,,,,, ,,,,,removed the backiong plates n welded the *&^%$ out of the mounts to the axles, reinstalled yayyyyy yyyyy yyyy

Both axles are great but if you only do one make it the front axle of course.....

Check out Graingers or Northern catalogs if no trailer dealer near you

Ol John T and all

[Log in to Reply]  [No Email]
rgvtx

12-31-2006 08:21:01




Report to Moderator
 Re: trailer brakes in reply to Little Ed, 12-31-2006 08:02:02  
Yes and no. If your considering a used trailer, the cost of adding brakes may exceed the cost of the trailer if you found one cheap enough. Most utility trailers that were sold new without brakes will not have the brake backing plates on the axles which means you will either need to replace the axle or add backing plates. Then of course you need the drums, shoes, magnets, wiring and of course a brake controller for your tow vehicle. In the event your considering a new trailer and the dealer does not have any with brakes, tell them what you want and get a quote. You will find the cost on a new trailer with and without brakes is not huge and probably much cheaper that converting it yourself.
HTH.

[Log in to Reply]  [No Email]
CaptRon

12-31-2006 08:13:00




Report to Moderator
 Re: trailer brakes in reply to Little Ed, 12-31-2006 08:02:02  
If the axles have a wellded on flange to mount the backing plates then it"s a matter of bolting on the plates to the flanges and installing the correct brake drums.

Even if the flanges are missing you can buy them and weld to the axle.

Other option is to replace the existing axles for brake axles.

Good Luck
CaptRon



[Log in to Reply]  [No Email]
Little Ed

01-01-2007 07:34:10




Report to Moderator
 Re: trailer brakes in reply to CaptRon, 12-31-2006 08:13:00  
Thanks Guys. Sounds relatively simple, just needed to know where to look. lots of smart fellers on this site.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy