Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

anvil

Welcome Guest, Log in or Register
Author 
ken in texas

11-27-2006 13:05:32




Report to Moderator

Does anyone have a good way to mount an anvil if you don't have a solid block of wood large enough.Also plans for building a small forge.




[Log in to Reply]   [No Email]
big fred

11-28-2006 11:01:08




Report to Moderator
 Re: anvil in reply to ken in texas, 11-27-2006 13:05:32  
I have a small anvil mounted on a piece of cedar log. Makes a nice stand that absorbs the hammer blows so they don't chip the concrete floor of my shop.



[Log in to Reply]  [No Email]
Cliff (VA)

11-28-2006 04:07:50




Report to Moderator
 Re: anvil in reply to ken in texas, 11-27-2006 13:05:32  
The traditional way to mount an anvil is to mount it to a log that is buried in the ground a foot or so on gravel. Anvil height should be such that if you make a fist and let it hang down your knuckles just graze the surface.

I have a number of reference books showing many other ways of mounting an anvil. Unfortunantly they are currently packed up. Basically the simplest is made of a steel plate with angle iron legs. You want it sturdy and steady.

As for a forge, around me they come up for auction regularly, and sell for nothing. Everyone used to be a part time blacksmith, now very few people are. I would avoid the small rivet forges that show up in antique shops. They are not big enough to do any real work.

I have a tuyere that I might be willing to part with if you are interested. There is also quite a bit on ebay.

I am enclosing a link to a site that has an index to quite a bit of good blacksmithing information in booklet form. You might look there. I have 8 years of issues of his magazine.

Good luck. Happy 'smithing

Cliff (VA)

[Log in to Reply]  [No Email]
msb

11-27-2006 20:20:24




Report to Moderator
 Re: anvil in reply to ken in texas, 11-27-2006 13:05:32  
An old brake drum makes a good forge.Use a truck drum if you want a larger forge or a car drum if you want a small forge.



[Log in to Reply]  [No Email]
jpuleo

11-27-2006 20:20:08




Report to Moderator
 Re: anvil in reply to ken in texas, 11-27-2006 13:05:32  
I have one that mounted on 4 4x4 legs topped with 3x6's and a thin layer of carpet. Has wheels that it can roll on if you tilt the stand slightly. Works great!



[Log in to Reply]  [No Email]
ken in texas

11-27-2006 17:55:37




Report to Moderator
 Re: anvil in reply to ken in texas, 11-27-2006 13:05:32  
Thanks to everyone that replied. It gives me lots of ideas to get started on.



[Log in to Reply]  [No Email]
135 Fan

11-27-2006 17:24:59




Report to Moderator
 Re: anvil in reply to ken in texas, 11-27-2006 13:05:32  
The school I went to had a base made out of a whole bunch of 2x4's nailed or scewed together. I've seen steel ones with an angle iron frame that the anvil sits in. A wood base would absorb the shock better than a steel base. Dave



[Log in to Reply]  [No Email]
JOHN HARMON

11-27-2006 16:38:30




Report to Moderator
 Re: anvil in reply to ken in texas, 11-27-2006 13:05:32  
My friend built his stand useing a 20" Budd Truck Rim which he welded a 2' pc. of 6" Well Caseing to a 1/2"plate he welded to the Rim to cover the center hole, in a vertical position, with a flat pc. of 1/2"Plate Steel the size of the Anvil Base welded flat on the top of the vertical pipe. Then he mounted the Anvil to this Plate ,works well.



[Log in to Reply]  [No Email]
Ron in Nebr

11-27-2006 15:55:39




Report to Moderator
 Re: anvil in reply to ken in texas, 11-27-2006 13:05:32  
Our anvil's on a 4-legged stand built out of angle iron. Works well, and is very stable, although it's about 8 inches higher than I'd like it to be.



[Log in to Reply]  [No Email]
hayray

11-27-2006 14:26:30




Report to Moderator
 Re: anvil in reply to ken in texas, 11-27-2006 13:05:32  
Latice several 2 x 4s criss crossing and build up a base. A lot of guys prefer that over a solid stump. It is also accaptable to make a anvil stand out of steel, like a 3 - legged stand.
To make a forge you can get some heavy plate steel, like at least 1/2" thick, Make a table with legs, cut a rectangular hole in the middel and weld up a box and set it down in the hole in the table - this will be the fire pot, cut a slit in the top of it with the torch, then weld a round pipe to the box and cut a hole, this will be the air duct. Weld a plate to the other end of the pipe and mount a squirrel cage blower hooked up to a reostat switch. If you are indoors cut a steel barrel in halve long ways and use that as a hood by suspending it above the table. If I remember I will take some pictures of it.

[Log in to Reply]  [No Email]
Kevin Andreas

11-27-2006 13:21:21




Report to Moderator
 Re: anvil in reply to ken in texas, 11-27-2006 13:05:32  
lots of information here Link



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy