Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Stihl chainsaws

Welcome Guest, Log in or Register
Author 
MSS3020

11-07-2006 10:58:39




Report to Moderator

Im in the process of looking for a chainsaw.
I have a homelite VI Super 2 but doesnt have the power I need for larger trees. Ive been looking at the MS290, MS390, MS310. These models tend to be the same except power. Any one have good or bad to say about either or of these models, or different one. My price range is under 500.00




[Log in to Reply]   [No Email]
Chad Franke

11-09-2006 07:59:59




Report to Moderator
 Re: Stihl chainsaws in reply to MSS3020, 11-07-2006 10:58:39  
I've talked to several Stihl and Husky dealers, if you are looking for a more occasional saw (not using it 30 hours a week every week, look at an Echo. Couple of the dealers have said that they think Echo's top line is now above Husky.



[Log in to Reply]  [No Email]
jeffcat

11-08-2006 16:28:03




Report to Moderator
 Re: Stihl chainsaws in reply to MSS3020, 11-07-2006 10:58:39  
A lot of good power is listed here and I have used both stihl and husky at neighbors. Always buy the biggest and best you can afford! I would never go below 20in bar or 70cc of power if possible. Anything smaller will be a toy as you really use it hard. I love my old McCulloch saws and the 650s will pound almost anything out there today. Up at the farm two weeks ago the township cut down a huge pin oak along the frontage. At the bottom of the bulge the tree was almost six feet across. I got to slab cut the huge tree up for my folks so the neighbor could log slit it. I made 19 main cuts with my McCulloch PM1000 with a 42in bar. It is a Pioneer that became the Partner P100 and Mac brought them in to the US as a power house. Man does 6.1 hp ever cut! A gallon of fuel mix doesn't go to far when you are useing that kind of power! Let us know how you do. Jeffcat

[Log in to Reply]  [No Email]
135 Fan

11-09-2006 00:44:42




Report to Moderator
 Re: Stihl chainsaws in reply to jeffcat, 11-08-2006 16:28:03  
You need one of those custom built saws they use in lumberjack competitions. 6.1 HP is nothing. I saw one on TV that had a modified 500 cc CR 500 Honda moto-cross engine. It was scary sitting on the ground. They put out 60 HP stock! and weigh a few pounds more than the average saw. Dave



[Log in to Reply]  [No Email]
jeffcat

11-09-2006 15:53:17




Report to Moderator
 Re: Stihl chainsaws in reply to 135 Fan, 11-09-2006 00:44:42  
135 Fan,
I have an antique of a saw. A 1948 Disston two man with a two cylinder 12hp Mercury out board engine. Just the engine is 75 pounds! This baby has a 3/4in pitch chain on it. Sounds like Paul Bunion would like to swing around! Go to Google and put in race saws. You want "race saws and race results" Look at the picures! Third one down. Talk about saw dust aflyin! Also have you seen the Dolmar motorcycle. These guys are a milkman and a plumber and they built a motorcycle with I think 24 engines on it? Not as fast as you would think but they showed all over Europe with the thing. Watch the little down load video you can get on line. Starting 24 engines with two guys pulling the ropes.! Email back if you like. Jeffcat

[Log in to Reply]  [No Email]
135 Fan

11-09-2006 23:27:52




Report to Moderator
 Re: Stihl chainsaws in reply to jeffcat, 11-09-2006 15:53:17  
Didn't find the video for the bike. Pretty interesting though. I looked at a bunch of the pictures. Lots of bike engines in saws. The 700lb. V-8 with 3 guys picking it up is sick! It's a wonder any of these guys have any legs left. Looks like an accident waiting to happen. Pretty cool stuff. I think I'll just stick to 55 cc Husky. I don't have a death wish. Dave



[Log in to Reply]  [No Email]
Stumpalump

11-08-2006 06:07:55




Report to Moderator
 Re: Stihl chainsaws in reply to MSS3020, 11-07-2006 10:58:39  
Some of the new Stihl have goofy emmision type carbs. Hard to ever get them right. You will line a Stihl dealers pocket with a couple of hundred bucks if you buy one. Stihl makes a fine saw but I believe you get a lot more bang for the buck with a Husqvarna. Don't be swayed by the new featurs on any of them that old saws don't have except the chain break. Easy start on Stihl is a joke , air purge carbs or intellegent carbs are problems down the road. Fancy chain adjusters' are all things you won't find or need on Stihl or Husky's professional line of saw. Check out the Husky 346XP on the arorist web sites. It runs the awsome newer .325 chain which I would take over a 3/8" chain any day now that I run one.

[Log in to Reply]  [No Email]
JT

11-08-2006 07:06:33




Report to Moderator
 Re: Stihl chainsaws in reply to Stumpalump, 11-08-2006 06:07:55  
ya gotta watch what Husky saw you get, we work on alot fo them and a lot of the parts for the smaller ones come from Poulan, the saws are both owned by EHP, (Electrolux Home Products. At one time the small Stihl trimmers were made by Ryobi, so you never know who is making what for whom. :>)



[Log in to Reply]  [No Email]
Stumpalump

11-08-2006 14:15:14




Report to Moderator
 Re: Stihl chainsaws in reply to JT, 11-08-2006 07:06:33  
JT,
Yea your right about some models but they both have 3 differnt lines. Consumer(cheap) mid grade(OK) professional (oh yea!). It's hard to tell the difference till you run them. My husky runs like a dirt bike.



[Log in to Reply]  [No Email]
135 Fan

11-08-2006 14:24:39




Report to Moderator
 Re: Stihl chainsaws in reply to Stumpalump, 11-08-2006 14:15:14  
They still make dirt bikes. Run like chainsaws. LoL I've got a 55 rancher and it's a great saw. The comparable Stihl was over $100 more. There were some other Stihl's but anything around the same price wasn't as good or was heavier. Dave



[Log in to Reply]  [No Email]
jack-iowa

11-08-2006 05:41:36




Report to Moderator
 Re: Stihl chainsaws in reply to MSS3020, 11-07-2006 10:58:39  
I have a stihl ms 360 pro and just love the heck out of it. Slices thru the biggest stuff like butter and starts with in 3 pulls.
Had a lot of pullins but no comaparison and I know it is probably a disgrace to compare to stihl but went thru 3 of them before I wised up. best money ever spent.



[Log in to Reply]  [No Email]
NE IA Dave

11-07-2006 19:36:54




Report to Moderator
 Re: Stihl chainsaws in reply to MSS3020, 11-07-2006 10:58:39  
I have a Sthil 046 and have had it for several years, pretty good overall. I have a few smaller Polins for trimming. The Polins I have are not the best if you are not a fix it yourselfer. I used to have a couple of Homlite 550s, pretty fast, but did not last real long.

The Huskies were a little less money in our area, but pretty much a toss up. I do have a friend who has a Sthil that kicks like a mule sometimes. He got it from another friend of mine that was older, and hated it because of the kicking. Both have had it to many experts,and good ol boys that can fix anything yet no improvment. The older guy got another Sthil and you can not pry it out of his hands as he loves it. I have had quite a few Sthil cement saws, 350s and 510s if my mind is on correct. They have been great, the reason for replacment has been hired men and loaning them out, never did I blame the saw.NE IA Dave

[Log in to Reply]  [No Email]
RJ-AZ

11-07-2006 18:08:12




Report to Moderator
 Re: Stihl chainsaws in reply to MSS3020, 11-07-2006 10:58:39  
Ihave a Stihl MS310 with a 20" bar that I really like. Was a little balky starting last Saturday after sitting since way last spring but after firing off it never missed a beat. Had it for two seasons now and likeit.I am looking for a lighter 16" saw for light work though.



[Log in to Reply]  [No Email]
Midwest redneck

11-07-2006 16:14:33




Report to Moderator
 Re: Stihl chainsaws in reply to MSS3020, 11-07-2006 10:58:39  
I have a Sthil 029 farm boss....Runs like a raped ape. I would only own Sthil or Husky. A guy near me has a Sthil..24" bar...kicksbutt to say the least. The road commision dropped a large oak at the end of my driveway and this guy showed up with his Sthil 24" bar ($500 too by the way) Needless to say this saw was incredible. (he wanted firewood) My Sthil 029 has cut down lots of hardwood trees on my land, I will likely buy another Stihl.

[Log in to Reply]  [No Email]
ZacsDad

11-08-2006 11:45:13




Report to Moderator
 Re: Stihl chainsaws in reply to Midwest redneck, 11-07-2006 16:14:33  
I too, had an 029 FarmBoss (predeccessor to the 290). Mine ran like a scalded dog for 15 years. Ran it through 5 cords per year for 10 of those. Finally ate the piston last year. Took it to my local Stihl dealer...he said it was a goner. bought another Stihl...

Have a friend that uses his Husky for the big stuff. Likes his Stihl too, but prefers the Husky for anything big....



[Log in to Reply]  [No Email]
`Bernie in MA

11-07-2006 16:04:32




Report to Moderator
 Re: Stihl chainsaws in reply to MSS3020, 11-07-2006 10:58:39  
I have a Stihl. Can't remember the #, MS something 90. The point is it has the easy-start feature, some kind of a delayed action recoil. It never kicks and you can start it with 2 fingers. My old one used to kick and jerk the cord handle out of my arthritic hand. So much so I had gone to an electric and generator until I saw the one I have now.



[Log in to Reply]  [No Email]
MarkB_MI

11-07-2006 15:00:45




Report to Moderator
 Re: Stihl chainsaws in reply to MSS3020, 11-07-2006 10:58:39  
I have had a Stihl 029 (the progenitor of the MS290) for many years. It is an OK saw for occasional use, but if I were to buy a new saw it would probably be the MS260 or MS360. These are a better grade of saw and have a much better power-to-weight ratio than the MS290 and MS390 (respectively).



[Log in to Reply]  [No Email]
Butch(OH)

11-07-2006 14:58:18




Report to Moderator
 Re: Stihl chainsaws in reply to MSS3020, 11-07-2006 10:58:39  
I like my Stihls and own plenty of them but the non-pro models, which incluse the models you ask about, have little to offer over many other quality makes. As a matter of fact others may offer you a better bang for the buck if you have a dealer close. Echo, Shindiawa, Jonserede, EFCO (JohnDeere and Cub Cadet are EFCO), Dolmar come to mind. XP Huskies are fine as is the upper end of their home owner line if you dont mind buying from a box store . Go with a good and close dealer is the best advise I can offer but if Stihl is it any of the saws you asked about will pile up the firewood but a MS361 is soooo nice,,LOL

[Log in to Reply]  [No Email]
Motorken

11-07-2006 14:06:25




Report to Moderator
 Re: Stihl chainsaws in reply to MSS3020, 11-07-2006 10:58:39  
Poulan, Craftsman, Homelite etc. are all junk and only good for trimming twigs. For a real saw you have two choices Stihl and Husky(husqvarna). The engine on the husky is stronger and generates more power for size and is the choice of serious loggers. For smaller saws 20" and less the Stihl is hard to beat for general ease of use, weight and power. One main advantage Stihl has above all others in the smaller saw range is the fact that it's chain guides that run in the bar groove are thicker than others as is the bar groove. This adds stability to the blade when dealing with the many binds placed on small saws when cutting smaller trees and branches at all kinds of angles. I own a 20+ year old Stihl 028 and a new Husky Farm boss and Still reach for the Stihl for most smaller jobs...

[Log in to Reply]  [No Email]
Erik MN

11-07-2006 12:01:46




Report to Moderator
 Re: Stihl chainsaws in reply to MSS3020, 11-07-2006 10:58:39  
I bought a MS290 with 18" bar about 5 years ago when I was 18 (before I bought my first car). It gets a lot of use for firewood and is a great saw. My dad has had the same Stilh saw (028 super - no longer made) for over 25 years and has cut probably between 600 and 1000 trees with it and still working great. I would go with the Stihl!



[Log in to Reply]  [No Email]
Bud in NC

11-07-2006 15:20:27




Report to Moderator
 Re: Stihl chainsaws in reply to Erik MN, 11-07-2006 12:01:46  
My 028 is about 25 years old and has been run over twice - both times by a retarded SIL - who's history - at least he took the daughter with him when he left!!!! Back to my 028 - after repairs from the junkyard, she still out cuts any other saw I've ever used! I'm getting old and I'm about crippled, too - a couple of years ago I had to hire some local guys to take down a large oak tree that'd been hit by lightning - these boys were a LONG way from pros!!!! ALL their saws puked - didn't have the guts so I "loaned" them my 028 - under my supervision, anyway. They were impressed! Last I heard they were hunting old Stihl's in yard sales - good luck!!! I wouldn't sell mine to them, either!
Husky's are good, too - Used a couple of them, never owned one but it's the only other brand of saw I'd even consider owning.
Seems like with the OLD Stihl saws, the even numbers were the Pro/ commercial models and the odd numbers were homeowner types.

[Log in to Reply]  [No Email]
JT

11-07-2006 11:40:01




Report to Moderator
 Re: Stihl chainsaws in reply to MSS3020, 11-07-2006 10:58:39  
If you can find a Dolmar dealer, you will be really happy with the power to weight ratio, and you can buy a saw that is equivalent to the MS260 for about $100.00 less. That would be a PS510. I have sold Stihl products for years, and they are not bad peices of equipment, but there are a lot of better units on the market to look at, in my opinion.



[Log in to Reply]  [No Email]
onefarmer

11-07-2006 11:04:00




Report to Moderator
 Re: Stihl chainsaws in reply to MSS3020, 11-07-2006 10:58:39  
I have several Stihl saws but use a 026 most has excelant power to weight ratio. I have a 20" bar on it, mostly so I don't have to bend over so far for working on the ground. The new version is MS260. My big one is a 044 with a 24" bar. Use it for felling and working the big stuff.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy