Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Tying quick release Hondo?

Welcome Guest, Log in or Register
Author 
hayray

11-06-2006 03:21:24




Report to Moderator

Correct spelling now, see previous post. I have the metal hondo and the rope.




[Log in to Reply]   [No Email]
Steve KS

11-06-2006 10:32:49




Report to Moderator
 Re: Tying quick release Hondo? in reply to hayray, 11-06-2006 03:21:24  
I hate those quick release hondas, so I can't help you w/ that. But you shouldn't have to add anything to the rope to get the nice tight burn, if it's a modern rope it's probably already been waxed, that will burn great - if not, it should still burn fine anyway. Depending on the lay of the rope you should just be able to tie the end knot as close to the end as possible and then burn the tail - it needs to be very tight. If it's a harder lay rope you might need some tools to get it very tight.

As for tying the honda knot itself here's a link:

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy