Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Stupid things we do: floor sander

[Show Entire Topic]  

Welcome Guest, Log in or Register
Author 
Rod in Smiths F

10-30-2006 04:03:44




Report to Moderator

Then there was the time I rented a floor sander to do my son's bedroom. When finished I decided that it would save a lot of work if I used it to surface the 7' oak desk top, so I put it on the back deck and tilled away. That worked, so why not the shelves for the unit? No room on the deck? Why not string them out on the concrete street by the house and then drive down the row with the sander? Cord too short? Unreel an extension and plug it in.

This went well until I actually started the sander and it popped the 10 amp breaker on the extension cord. Exasperated after a long day, I stepped over and punched down the breaker...

Nothing on this earth accelerates down a street as quickly as a Clark floor sander. At terminal velocity when the cord unplugged, it narrowly missed a Pontiac and then smashed its case to pieces on the curb. Not my best introduction to my neighbours.

The rental guys were pretty stoic about my gaffe, welded the case back together and put the sander back in operation, still with the two-pole switch they had substituted for the electronic one.

[Log in to Reply]   [No Email]
135 Fan

10-30-2006 11:08:49




Report to Moderator
 Re: Stupid things we do: floor sander in reply to Rod in Smiths Falls, ON, , 10-30-2006 04:03:44  
Sorry, I'm still laughing at that one. No one got hurt. I had a dodge gear reduction starter out that had a flat spot and wouldn't turn. I hooked it up to battery to see what it was doing. If I turned the gear with my thumb it would work. I did this a couple times. Then I tried it again and it sucked my thumb in between the gear and the case. I quickly wrapped it up so it wouldn't bleed. It never did bleed but I had gear teeth marks in my thumb nail for a couple of months. Dave

[Log in to Reply]  [No Email]
[Show Entire Topic]     [Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy