Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Worst Tool?

Welcome Guest, Log in or Register
Author 
trw

10-15-2006 15:54:56




Report to Moderator

Everybody has their favorite brand of power tool or favorite brand of wrenches. How about this, what is your worst tool? This should be fun to read if people will respond. My least favorite is the "channellocks". I know that is a brand name, but I think most everyone will know what I am talking about. They seem to be a finger pincher after a little hard use. Also the "Globemaster" brand of tool that were made in the early 1970's. Maybe they were made even before that, but I knew of them in the 70's. They make the Chinese stuff that is made now look like Snap-On quality. They were the poorest quality tools I have ever seen. And I have used some cheap ones!

[Log in to Reply]   [No Email]
Stan in Oly, WA

10-17-2006 11:59:01




Report to Moderator
 Re: Worst Tool? in reply to trw, 10-15-2006 15:54:56  
Fun topic. Thanks trw.

All the best, Stan



[Log in to Reply]  [No Email]
sde

10-17-2006 09:59:29




Report to Moderator
 Re: Worst Tool? in reply to trw, 10-15-2006 15:54:56  
Menards sells a line of tools called Tool Shop. Very Cheap. Smoked a 3/8" drill on the first hole, but it was a 1/2" drill bit. The trigger on a Chop Saw broke internally after about 5 cuts. Complete waste of time to try and use.



[Log in to Reply]  [No Email]
Leland

10-17-2006 09:42:56




Report to Moderator
 Re: Worst Tool? in reply to trw, 10-15-2006 15:54:56  
Any cordless tool made by sears the batterys don't last very long and therescrewdrivers have gone to pot as well .



[Log in to Reply]  [No Email]
Ken in Arkansas

10-16-2006 08:57:21




Report to Moderator
 Re: Worst Tool? in reply to trw, 10-15-2006 15:54:56  
I agree with the comment about the Craftsman Robogrips. They are almost useless. I'm not impressed with the Rotozip either. I received one as a gift. The tool isn't badly made, but it can't be controlled well enough for most jobs. Sears sold some adjustable wrenches a few years ago that were too clumsy to fit in most places.



[Log in to Reply]  [No Email]
cj3b_jeep

10-16-2006 07:41:32




Report to Moderator
 Re: Worst Tool? in reply to trw, 10-15-2006 15:54:56  
The worst tool I've ever owned is a dremel tool, either the cheapy harbor freight ones or the real thing. I've gone through 4 of them and only use them about twice a year. The first one the collar stripped out, the rest have all been bearing and brush issues. Theyre handy things, but they're junk.



[Log in to Reply]  [No Email]
Vern-MI

10-17-2006 04:34:49




Report to Moderator
 Re: Worst Tool? in reply to cj3b_jeep, 10-16-2006 07:41:32  
I agree on the Dremel brand as far as the bearings and couplings going bad almost right out of the box. Ryobi makes a model HT20VSK that has good bearings, better controls and feel and is less costly to buy. Try it, you will like it.



[Log in to Reply]  [No Email]
steve in in

10-16-2006 05:54:13




Report to Moderator
 Re: Worst Tool? in reply to trw, 10-15-2006 15:54:56  
This one is easy. It was a Craftsman router with some blankety blank locking collars for adjusting depth. They were a pita to adjust and I used it exactly three times. I finally sold it on Ebay.

Somebody in California is probably cussing it to this day. I probably should have kept it and just left it mounted on a table.



[Log in to Reply]  [No Email]
IH2444

10-16-2006 08:51:34




Report to Moderator
 Re: Worst Tool? in reply to steve in in, 10-16-2006 05:54:13  
LOL, yep still got one and use it in a router table ;)



[Log in to Reply]  [No Email]
ohkentucky

10-16-2006 09:21:08




Report to Moderator
 Re: Worst Tool? in reply to IH2444, 10-16-2006 08:51:34  
dito, but I still dont like using it.



[Log in to Reply]  [No Email]
IH2444

10-16-2006 18:45:02




Report to Moderator
 Re: Worst Tool? in reply to ohkentucky, 10-16-2006 09:21:08  
Yep, but I am too cheap to throw it away :)



[Log in to Reply]  [No Email]
Dachshund

10-16-2006 05:35:36




Report to Moderator
 Re: Worst Tool? in reply to trw, 10-15-2006 15:54:56  
Dunno - kinda hard to tell which was WORSE than another. I do know that I have broken more Snap-Off tools than ANY other brand (including cheapie Chinese). Only got a couple left and won't be buying any more. Other than that, probably the Crapsman tablesaw I had. It had a little curciut breaker on it that would trip every time you used it. I'd be cutting a 4" 1x4, get half way and the thing would trip. Woe be to the person trying to rip something. I've got a bunch of C-man hand tools and Thorson sockets that are great, along with selected Cheap stuff that has held up well.

[Log in to Reply]  [No Email]
larry in tn

10-16-2006 04:33:08




Report to Moderator
 Re: Worst Tool? in reply to trw, 10-15-2006 15:54:56  
Most of us are "Savvy" enough to know what the difference is between junk tools and good "make my living tools". I do succumb to the "Gee Whiz" aint that "Neat" foolishness on occasion. Not to mention the junk tools that well meaning friends buy as gifts for you because they know you love tools. The single worst (read useless)tool I ever had was a Williams swivel head 3/8" drive ratchet. A gift from a friend, it was a beautiful chrome plated device that I could never get to do anything right. It was for some reason too long for anything I tried to do. The head never seemed to quite swivel into a solid secure leverage position. You could never use it without bumping the lever and changing the ratchet direction. This was an expensive wrench made by what I consider one of the premier tool companies. It was supposed to be the answer to getting spark plugs out of the older small block Chevy engines. I'm pretty good with a wrench so I didn't fault myself on this one. There is however a happy ending to this "sorrid" tale. I became disabled in 2003 and was forced to close up shop. Rather than let all my beloved tools wind up loaned out or in garage sells I decided to sell them or give them to friends that appreciate quality tools. Because I'm a modern up to date kinda guy, I sold some tools on E-bay. That Williams "Broke Neck" wrench brought $155.00 from a collector in New York. Wish I had 20 more of the things.

My most used or useful tool is an old Wizard/Western Auto 3/8" X 7/16" open end wrench. I've carried it so long that the chrome and most of the copper plating are worn off. Next to my pocket knife I guess I've used that little wrench more than any tool it ever owned. I've often wondered why I run across those two sizes so much.


www.oldduggy.com

[Log in to Reply]  [No Email]
Junky Tools

10-15-2006 19:23:53




Report to Moderator
 Re: Worst Tool? in reply to trw, 10-15-2006 15:54:56  
About anything sold by the traveling tool sales, they are just a modern day snake oil show. They sell junk to people, then move on to the next town, before the buyers realize they wasted their money. There was one here a while back, I walked through, but refused to buy any of the stuff. It was funny to see a buch of idiots wearing loafers, filling buggies up with that junk, thinking they were really getting a bargain.

[Log in to Reply]  [No Email]
buickanddeere

10-15-2006 19:16:41




Report to Moderator
 Re: Worst Tool? in reply to trw, 10-15-2006 15:54:56  
Slot screw drivers when used on those (^(())^^%#@$^ slot head screws. Use a robertson screwdriver and screws and be done with it properly. Keep the slot screw driver as a pry bar and scraper.



[Log in to Reply]  [No Email]
Dachshund

10-16-2006 05:28:07




Report to Moderator
 Re: Worst Tool? in reply to buickanddeere, 10-15-2006 19:16:41  
Yes - slotted screws need to be un-invented.



[Log in to Reply]  [No Email]
Brian in NY

10-16-2006 05:42:53




Report to Moderator
 Re: Worst Tool? in reply to Dachshund, 10-16-2006 05:28:07  
I 100% agree! Why did anyone ever think that was a good idea, and why are they still made?????



[Log in to Reply]  [No Email]
ohkentucky

10-16-2006 09:34:21




Report to Moderator
 Re: Worst Tool? in reply to Brian in NY, 10-16-2006 05:42:53  
YES, how many times in your life have you dealt with these ***king screws and either cut yourself or skinned a knuckle? Ive said it a hundred times, "why do they still make these *amn things"



[Log in to Reply]  [No Email]
Slowpoke

10-29-2006 00:36:38




Report to Moderator
 Re: Worst Tool? in reply to ohkentucky, 10-16-2006 09:34:21  

A local chain of about 50 hardware stores in Northern & Central California is no longer stocking slotted screws. Rejoice!



[Log in to Reply]  [No Email]
Stan in Oly, WA

10-16-2006 14:30:56




Report to Moderator
 Re: Worst Tool? in reply to ohkentucky, 10-16-2006 09:34:21  
Hi ohkentucky,

Several reasons I can think of why they still make slotted screws: They're cheap to make; 99 out of 100 people have so little mechanical aptitude or experience that they would consider a discussion of the merits of various patterns of screw heads to be incredibly esoteric---and those people buy screws, occasionally; and, on the positive side, in a pinch you can almost always find something to serve as a screwdriver for a slotted head fastener, less often for Phillips head, rarely to never for Torx, square drive, etc.

All the best, Stan

[Log in to Reply]  [No Email]
Midwest redneck

10-15-2006 19:12:04




Report to Moderator
 Re: Worst Tool? in reply to trw, 10-15-2006 15:54:56  
The worst tools are the junk made in China. Total garbage as far as quality.



[Log in to Reply]  [No Email]
Stan in Oly, WA

10-15-2006 22:21:46




Report to Moderator
 Re: Worst Tool? in reply to Midwest redneck, 10-15-2006 19:12:04  
Hi M R,

Chinese tools are no better than they have to be to sell by the billions of dollars worth every year. They're capable of making good tools when they have reason to do so. The city of Shanghai has mag-lev trains that travel at 200 mph and are on schedule 99.9% of the time. I'd be impressed by that even if I found out they used foreign tools to build it, but I'll bet they didn't.

All the best, Stan

[Log in to Reply]  [No Email]
Midwest redneck

10-16-2006 02:29:01




Report to Moderator
 Re: Worst Tool? in reply to Stan in Oly, WA, 10-15-2006 22:21:46  
True, but I was referring to a cresent wrench that I have, I bent it---oops. Also sockets from China, Broke several. Chinese cutting tools have no where near the quality in the steel to hold a good cutting edge. Just my 2 cents.



[Log in to Reply]  [No Email]
Stan in Oly, WA

10-16-2006 14:18:10




Report to Moderator
 Re: Worst Tool? in reply to Midwest redneck, 10-16-2006 02:29:01  
Hi M R,

Actually I can't disagree with you. I got rid of a Chinese made SKS rifle partly because I always half expected it to blow up in my face, partly because I didn't totally believe the Chinese ammo was actually non-corrosive, and partly because it had the worst trigger pull of any firearm I've ever owned---bar none.

The head of the community college welding department where I'm an assistant hates Chinese tools---at least the ones people bring in from Harbor Freight. He makes it a point to exhibit every one that fails in service. I have to admit, there's no shortage.

All the best, Stan

[Log in to Reply]  [No Email]
Stumpalump

10-15-2006 19:00:05




Report to Moderator
 Re: Worst Tool? in reply to trw, 10-15-2006 15:54:56  
My worst tool beats the hell out of the dust collecting trinkets the wife hauls home. The best new tool I got is called a Zippet. $2.19 at Home Depot. It's a plastic strip with hair catching barbs. You shove it in and out of your sink and tub drains and it breaks up the crud and pulls hair out. Its small and you don't have to even remove the sink stopper. Better for septic tank than Draino. Cleared 3 slow drains today in 5 minits.

[Log in to Reply]  [No Email]
jpuleo

10-15-2006 18:56:22




Report to Moderator
 Re: Worst Tool? in reply to trw, 10-15-2006 15:54:56  
ROTOZIP saw. Its ok for cutting drywall but its a piece of crap for trying to anything else with. I hate most all cheep tools, but I have a cheep set of ring/c-clip pliers and they are plain evil. They just bend and send the clip flying, usally into an engine case or pile of junk.



[Log in to Reply]  [No Email]
Redtom

10-15-2006 17:41:49




Report to Moderator
 Re: Worst Tool? in reply to trw, 10-15-2006 15:54:56  
Any "no brand" pair of channel lock style pliers that doesn't use the arced grooves to adjust but uses the lobes on the slot instead. A guaranteed blood blister. I found a piar of Knipex brand channel locks that adjust by pushing the pivot bolt. They're sh!# too. About 18 yrs ago I bought an audible test prod which uses your body for the ground. (I guess the theory was that it wouldn't harm auto computers). I'm scared to use it for fear that I may not ground it and get a false reading.

[Log in to Reply]  [No Email]
Stan in Oly, WA

10-15-2006 17:23:26




Report to Moderator
 Re: Worst Tool? in reply to trw, 10-15-2006 15:54:56  
Hi trw,

Years ago I had a Craftsman 24" belt sander that needed a bearing and Sears didn't stock parts for it anymore. The guy who gave me the bad news at the repair counter talked me into buying a reconditioned 21" Craftsman belt sander that would have gotten me through the job I was doing if it had worked. Unfortunately it had been manufactured with a built-in design flaw which made it impossible to adjust it so that the belt would stay on. At the time (1977)I could see exactly what was wrong, but I can't remember the details now. I felt that that situation went beyond merely poor quality.

A few years after that I bought a new Craftsman sidewinder style circular saw at a price so good that it overcame my preference for worm-drive and hypoid gear saws (the carpentry standard on the west coast.) The first time I pulled the trigger the smoke got out of it and, of course, it was no good after that.

Last week a friend showed me a Chinese made adjustable wrench from Harbor Freight that opens when you turned the screw the direction which closes every other adjustable wrench either of us has ever seen. Maybe that's supposed to be more comfortable for people who read from right to left, or it's a specialty item for dyslexic mechanics.

I do have in mind one tool which was by far the worst tool I ever owned but it seems so clear to me now that only a simple-minded person could ever have expected it to be anything other than the total POS that it was that I don't want to talk about it. Low priced Chinese tap and die sets fail the first time they are used chasing threads, and this tool was worse than that.

All the best, Stan

[Log in to Reply]  [No Email]
Charles (in GA)

10-16-2006 02:27:22




Report to Moderator
 Re: Worst Tool? in reply to Stan in Oly, WA, 10-15-2006 17:23:26  
Quoting Stan..... "Last week a friend showed me a Chinese made adjustable wrench from Harbor Freight that opens when you turned the screw the direction which closes every other adjustable wrench either of us has ever seen. Maybe that's supposed to be more comfortable for people who read from right to left, or it's a specialty item for dyslexic mechanics."

I have a Swedish made BAHCO adjustable wrench, part of a Volvo tool kit from long ago, it too turns backwards to American made adjustables. Good quality tool, just a pain to use if you are used to other adjustables.

Charles

[Log in to Reply]  [No Email]
Dug

10-15-2006 19:01:18




Report to Moderator
 Re: Worst Tool? in reply to Stan in Oly, WA, 10-15-2006 17:23:26  
Stan hit it with the belt sander...I have one that has never held the paper.



[Log in to Reply]  [No Email]
steve in in

10-16-2006 05:50:43




Report to Moderator
 Re: Worst Tool? in reply to Dug, 10-15-2006 19:01:18  
I have the same belt sander somewhere. I ended up buying a Bosch and couldn't be happier. The Sears, I figured out, could be finessed by applying pressure on one side causing the belt to start moving back in. The problem was, it eventually would get into some adjustment bolt on the inside and start throwing sparks so you would have to apply pressure the other way. Now I know why it was at an auction.

[Log in to Reply]  [No Email]
Pooh Bear

10-15-2006 16:49:31




Report to Moderator
 Re: Worst Tool? in reply to trw, 10-15-2006 15:54:56  
Vice Grips. Whatever the brand name.
When you squeeze them and they clamp down,
I always seem to get that piece of skin
between my thumb and pointer finger
pinched between the handle and the release lever.

Pooh Bear



[Log in to Reply]  [No Email]
JOHN HARMON

10-15-2006 16:38:21




Report to Moderator
 Re: Worst Tool? in reply to trw, 10-15-2006 15:54:56  
The worst tool that I have ,and I have two of them because I thought something was not right with the first one so I bought another one to try it out and it was as hard and awkward to use as the first one, is those funny looking plier type things they sell you to help you to easily hook back up the springs that hold your Drum type Brake Shoes to the Brake Backer Plate. I can not make those things work at all. I very easily hook the keeper Springs with a pair of long Handled heavy duty Needle Nose Pliers. At first I thought it was my inability to use this tool but several other people I have asked about these tools echo my complaint.

[Log in to Reply]  [No Email]
Lloyd Llama

10-15-2006 18:17:26




Report to Moderator
 Re: Worst Tool? in reply to JOHN HARMON, 10-15-2006 16:38:21  
I agree with John, those brake pliers are about useless!



[Log in to Reply]  [No Email]
bradk

10-16-2006 16:45:01




Report to Moderator
 Re: Worst Tool? in reply to Lloyd Llama, 10-15-2006 18:17:26  
If you seen how brake pliers are actually used,you'd say "oooohhh..like that!!"
I wouldn't be w/out mine.~brad



[Log in to Reply]  [No Email]
Dusty MI

10-15-2006 16:35:13




Report to Moderator
 Re: Worst Tool? in reply to trw, 10-15-2006 15:54:56  
Channellocks, they are most likley the most used tool that construction electricion use, a good tool

Dusty



[Log in to Reply]  [No Email]
the tractor vet

10-15-2006 16:30:24




Report to Moderator
 Re: Worst Tool? in reply to trw, 10-15-2006 15:54:56  
Well since i have a Donald Trump fortune in tools i can not think of one tool that i hate and i realy don 't have JUNK tools and as far as Channel loc's go i have had them from a lot of years and never had a problem , guess ya got to be smarter then the tool.



[Log in to Reply]  [No Email]
charles(mo)

10-15-2006 16:16:02




Report to Moderator
 Re: Worst Tool? in reply to trw, 10-15-2006 15:54:56  
I found a Craftsman Robogrip pliers about a year ago just laying by the side of the road. I put them in my truck tool box and use them occasionly. Glad I didn't waste my money buying them. There are 13 guys at work that have tried them and they all say the same thing, "better than nothing, but not much".



[Log in to Reply]  [No Email]
730virgil

10-15-2006 19:25:19




Report to Moderator
 Re: Worst Tool? in reply to charles(mo), 10-15-2006 16:16:02  
you want some more of those d things ?! i will send you mine if i haven't threw them away . the only thing they do good is slip off and pinch your fingers .



[Log in to Reply]  [No Email]
TopCat

10-15-2006 16:52:59




Report to Moderator
 Re: Worst Tool? in reply to charles(mo), 10-15-2006 16:16:02  
I agree 100% whth the statement about the robogrip pliers sold by sears they are about totally useless for more than light occasional use and then it's an iffy proposition.....



[Log in to Reply]  [No Email]
Eddie in MI

10-15-2006 16:38:43




Report to Moderator
 Re: Worst Tool? in reply to charles(mo), 10-15-2006 16:16:02  
Oh, the Robo Grips take the cake! I took mine back to Sears and got me a some Knipex Cobras instead. The best waterpump-style pliers I have ever used were made by FACOM. Aboslutely THE BEST!



[Log in to Reply]  [No Email]
Tim Casbolt

10-15-2006 16:11:04




Report to Moderator
 Re: Worst Tool? in reply to trw, 10-15-2006 15:54:56  
The little wrench sets they sell at Harbor Freight for something like 99 cents.



[Log in to Reply]  [No Email]
TimS in Mo

10-15-2006 17:16:20




Report to Moderator
 Re: Worst Tool? in reply to Tim Casbolt, 10-15-2006 16:11:04  
A cummins 6 inch vise that doesn't have a way to stop the head on it from rotating 360 degreees..... a complete piece of junk as whenever you go to clamp something down in it, the head turns....



[Log in to Reply]  [No Email]
Eddie in MI

10-15-2006 19:35:09




Report to Moderator
 Re: Worst Tool? in reply to TimS in Mo, 10-15-2006 17:16:20  
Just drill a hole, tap it, and use a sort of set screw. That's how the Wilton that I have stays put...



[Log in to Reply]  [No Email]
TimS in Mo

10-16-2006 09:13:38




Report to Moderator
 Re: Worst Tool? in reply to Eddie in MI, 10-15-2006 19:35:09  
Eddie, I thought about doing that and I still might.

It just makes me mad that I have to do it before I can even use it.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy