Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Stubborn Rusted Steering Wheel

Welcome Guest, Log in or Register
Author 
Kestrel

10-02-2006 13:38:59




Report to Moderator

third party image

I'm sure its been brought up before, but any suggestions in removing a heavily rusted steering wheel ? After removing the nut I soaked the shaft with PB Blaster and have been banging on my wheel puller with no results.

I hate to bring out the heavy artillery-yet. I'm not in a big hurry either. Maybe wait a day, spray, bang,tighten, etc. Ideas appreciated....
Thanks.
Kestrel in CT.

[Log in to Reply]   [No Email]
cj3b_jeep

10-03-2006 12:09:58




Report to Moderator
 Re: Stubborn Rusted Steering Wheel in reply to Kestrel, 10-02-2006 13:38:59  
For my jeep, I bought a bearing puler from northern and cut the hole out larger to fit around the steering shaft, then I pulled on that instead of the bakelight. It spread the load ad did not crack the steering wheel. I'd put a nut on there also as when it does come of, it'll be doing mach 1.

[Log in to Reply]  [No Email]
Kestrel

10-03-2006 05:44:40




Report to Moderator
 Re: Stubborn Rusted Steering Wheel in reply to Kestrel, 10-02-2006 13:38:59  
Thanks guys. I have the acorn nut back in place and some Kroil ordered.
Heat 'n beat to resume soon.
I'm also learning to use patience. Not long ago I would have whaled away and done more damage than I could fix. Aging has its pluses I guess.
Kestrel in CT



[Log in to Reply]  [No Email]
Joe (Wa)

10-02-2006 22:23:14




Report to Moderator
 Re: Stubborn Rusted Steering Wheel in reply to Kestrel, 10-02-2006 13:38:59  
Take your puller off, put a nut on the steering shaft, lubricate the threads on your puller and put back on like in your pix. Soak with PB blaster, Kroil or whatever. Use an impact on the puller.

Joe



[Log in to Reply]  [No Email]
IBorange in TX

10-02-2006 19:18:12




Report to Moderator
 Re: Stubborn Rusted Steering Wheel in reply to Kestrel, 10-02-2006 13:38:59  
Looking at the pic, you need to put a hex nut on that shaft before you go any farther. Hammering on it will mushroom the shaft and you will never get the acorn nut back on it. After soaking w/your Blaster or Koil, put tension on the clamp. Then place a 3/4 soft iron rod on the side of the hub and use a 3lb hammer and give it a good slam. The side hammering will set vibrations in the hub and the clamp will pull it off. Good Luck.....

[Log in to Reply]  [No Email]
MarkB_MI

10-02-2006 19:12:47




Report to Moderator
 Re: Stubborn Rusted Steering Wheel in reply to Kestrel, 10-02-2006 13:38:59  
A little heat, combined with pressure from your puller, will work miracles. Many folks are shy about using heat, but you'll do far less damage with your acetylene torch that you will with a hammer.



[Log in to Reply]  [No Email]
Hobo,NC

10-02-2006 17:40:08




Report to Moderator
 Re: Stubborn Rusted Steering Wheel in reply to Kestrel, 10-02-2006 13:38:59  
I have had to resort to Heat, a air chisel, and have had to cut the center hub with a cut off wheel to split it.
This tip werks most of the time. See the link or click on Hobos


Third Party Image

[Log in to Reply]  [No Email]
Dale in WV

10-02-2006 16:45:33




Report to Moderator
 Re: Stubborn Rusted Steering Wheel in reply to Kestrel, 10-02-2006 13:38:59  
Oh - you"re working INSIDE?? Mine was a toughie on the 53 TO-30. Ended up putting a comealong to it to an overhead point. Bakelite shattered eventually, but the spokes stayed intact -- bent a little, but when it popped, it really popped. Echo the concern about blossoming the threads under the wheel puller. Better to smoosh a nut on top than bugger the threads below



[Log in to Reply]  [No Email]
Emanon

10-02-2006 16:30:15




Report to Moderator
 Re: Stubborn Rusted Steering Wheel in reply to Kestrel, 10-02-2006 13:38:59  
Hi, may I sugjest you put that nut back on the shaft, if you keep pulling down on that shaft,your going to spred it out and you'll never get the nut back on. ust my >02 cents. E.



[Log in to Reply]  [No Email]
Bud in NC

10-02-2006 15:42:57




Report to Moderator
 Re: Stubborn Rusted Steering Wheel in reply to Kestrel, 10-02-2006 13:38:59  
ALL the answers before sound exactly like what I"d try but first I"d give it a dose of Kroil and let it sit for a day or two - and give it more Kroil any time I walked by it - then bring out the big guns! You can"t buy the stuff "off the shelf" but here"s a link to the site -
Link
Yeah - it"s a strange address, I"ll admit but that"s what came up. If that link doesn"t work just do a Google on "Kroil". We used this stuff by the gallon on steam turbines - were talking YEARS of rust and 1200�+ heat - and the 8" diameter nuts and studs would unscrew! Blew me away! It"s the best penetrant I"ve ever used. According to the label it'll get into a crack that's one one millionth of and inch! Naw - I ain't even gonna TRY to verify it - I just know the stuff works! I try to save my last can as a "last resort"!!! Good luck!

[Log in to Reply]  [No Email]
upred

10-02-2006 18:40:50




Report to Moderator
 Re: Stubborn Rusted Steering Wheel in reply to Bud in NC, 10-02-2006 15:42:57  
Kroil--- www.kanolabs.com



[Log in to Reply]  [No Email]
john-mi

10-02-2006 14:28:15




Report to Moderator
 Re: Stubborn Rusted Steering Wheel in reply to Kestrel, 10-02-2006 13:38:59  
You have to be careful that you dont mushroom the end of the shaft.I think a little heat with the pressure will take it off.



[Log in to Reply]  [No Email]
dr.sportster

10-02-2006 14:03:47




Report to Moderator
 Re: Stubborn Rusted Steering Wheel in reply to Kestrel, 10-02-2006 13:38:59  
Make a paper mache of sloppy wet newspaper to keep on the outer rim for heat protection and heat center using oxy/acet rig.There are some heat jobs the small torch just wont get hot enough for.Protect everything from the flame under the wheel with sheetmetal.If the tractor is a 1941 thats probably last time the wheel was off.



[Log in to Reply]  [No Email]
John T

10-02-2006 14:01:57




Report to Moderator
 Re: Stubborn Rusted Steering Wheel in reply to Kestrel, 10-02-2006 13:38:59  
I guess you dont wanna burn off any paint etc and I dont blame you, buttttt ttttt If that wheel hub were heated all around Id bet about anything she would pop right off after that. When using pullers I have best luck with shocking rapping dead hammer blows on the pullers end and the hub then give her another 1/4 turn n shock n rap n hammer again, then repeat that cycle of hammer n tighten n hammer n tighten etc.

Ive also used tie rod end remover forks (tuning forks) over the shaft n behind the wheel hub to hammer there which has popped them free (but after heating is better).

John T (heat n beat is my solution lol)

[Log in to Reply]  [No Email]
Ebbsspeed

10-02-2006 13:54:39




Report to Moderator
 Re: Stubborn Rusted Steering Wheel in reply to Kestrel, 10-02-2006 13:38:59  
I'd put a little heat on that hub and see if that didn't do the trick. Since your wheel doesn't look pristine, a little heat won't hurt it, and you can always repaint the hub and spokes.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy