Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

System to move grain

Welcome Guest, Log in or Register
Author 
Goat Squeezer

09-13-2006 09:44:10




Report to Moderator

Ok guys I need some ideas. After recently going through a midlife crisis or having a brain cloud (haven�t figured out which one) I decided I wanted to take a crack a owning a dairy, a goat dairy at that. Ok, we leased a farm and building, bought 125 head of milkers and let it rip. So far it has been good. What I want to do is get away from sack grain mix and get a grain bin to cut back on the cost of the sack feeds. The closest I can get a grain bin to the milking parlor is about 40 feet due to pen configurations and access for a bulk grain truck to load the bin. I want to avoid having to move the grain in wheelbarrows or buckets into the parlor to save time and add convenience. So how do I get the grain from point A to point B without killing our selves or spending a boatload of money on an automatic feeding system?

Ideas?

Thanks,

Greg

[Log in to Reply]   [No Email]
JMS/MN

09-14-2006 11:59:17




Report to Moderator
 Re: System to move grain in reply to Goat Squeezer , 09-13-2006 09:44:10  
Talk to people who build grain bins, or manufacture bulk feed tanks. Flex tubes work fine, but if you have a straight run, buy components. Tubes and fliting come in 20 foot lengths, (sometimes 40 foot) get a power head with motor mount, hopper and discharge spout. They'll tell you what size motor for your run.



[Log in to Reply]  [No Email]
NE IA Dave

09-13-2006 18:30:50




Report to Moderator
 Re: System to move grain in reply to Goat Squeezer , 09-13-2006 09:44:10  
Flex augers are what we install mostley- I know where there is a 4" I think. Left hand turns are not the best if you can avoid it as it wears the plastic tubing. You can make 1= 45 (exit the bin) then another 45 where it enter your building overhead. In addition you could make 3 90s if needed. S lines are a no no if even possible. Progressily increase the size of your holes in the tube for drops if you use numerous drops- the reason is feed lubricates the flex. You can weld the flex from many used systems together if done properly, very easy done. I would guess you probably could get buy with a 2" if time is not a factor or if you have a big receiving unit. A good back up to the auto shut off switch, if you intend to start it and leave it unattended is simply a 5 gallon bucket tied with a wire to a 30 amp switch box. when the auto shut off switch fails the feed fills the bucket and pulls the power off, fool proof and inexpensive. We have lots of empty systems sitting in our countrysides, rusted flex is not a problem ----IF and I do mean if you start out correctly untill it shines up. I would avoid the continuous loop flexes unless the instalation and price is right. The last used system we installed was a continuous loop system including 2 motors and I think probably 30 seperate meeterd drops. Auto start time clock with up to 6 feedings a day. The total equipment package I think was $250.00 plus our labor to install. I sure as heck can't haul feed in a bucket even if I have to get the wife another job to pay for it. You should be able to find a used (Regular flex) in the 2-3" for a little or nothing. NE Ia Dave

[Log in to Reply]  [No Email]
Goat Squeezer

09-13-2006 12:18:17




Report to Moderator
 Re: System to move grain in reply to Goat Squeezer , 09-13-2006 09:44:10  
Thanks guys, there are several cow dairy�s in the area that are closed down. I think I will start trying to contact the owners and see if they have a small auger that they would be willing to part with. I like the idea of the plastic one that would be somewhat flexible but we could make a rigid metal one work I think. There is a window on that side of the parlor that could be used to access the general area and fill a barrel twice a day. Would really like to get an automatic feeding system but we are trying hard to leave the banks out of this for now and keep it a cash business. The dairy not having any debt feels pretty good.

Next question, any ideas what a used 40 foot 4� auger in decent shape is worth? Would prefer electric. I don�t want to insult anybody if they just tell me to make an offer on one.

Thanks,

[Log in to Reply]  [No Email]
paul

09-13-2006 22:04:04




Report to Moderator
 Re: System to move grain in reply to Goat Squeezer, 09-13-2006 12:18:17  
A 20 foot used electric 4" auger at auctions go for $20 or so around here. Don't see 40' ones tho.

--->Paul



[Log in to Reply]  [No Email]
nballen

09-13-2006 14:52:52




Report to Moderator
 Re: System to move grain in reply to Goat Squeezer, 09-13-2006 12:18:17  
Well, its worth what you're willing to pay ;->

You can always price a new auger (auger system) and offer 40-50% of that price, depending on condition.

A lot will depend on how much repair you want to / can do. Some things to check (in no particular order) would be: motor, auger bearings / bearing surfaces, wiring, auger flights (the spiral metal that moves the grain), tube, motor mounts (welds), etc.

If you see the same difference between bulk and bagged feed that we have out here in ID, your could "pay back" your bulk bin / auger costs pretty quickly.

Don't be afraid to ask the owner, "What do you think its worth?" or "Would I insult you if I offered $xx for..." The worst they could do is throw you off the place!

Nathaniel

[Log in to Reply]  [No Email]
paul

09-13-2006 11:06:16




Report to Moderator
 Re: System to move grain in reply to Goat Squeezer , 09-13-2006 09:44:10  
The flex feed augers that are used in poultry, hog, & even cow dairy setups. They will auger feed 2000 feet if need be. The best is the plastic tube type, the feed doesn't rust through. Typically 4".

Really would be nice to have access to the barn tho, we typically keep one side of the barn free for access to load, walk in, get supplies to, etc.

--->Paul



[Log in to Reply]  [No Email]
Coloken

09-13-2006 10:45:28




Report to Moderator
 Re: System to move grain in reply to Goat Squeezer , 09-13-2006 09:44:10  
Auger (4 inch??) with electric motor. Is there any chicken/egg factories near you? See if they will let you have a look at how they do it.



[Log in to Reply]  [No Email]
nballen

09-13-2006 10:30:09




Report to Moderator
 Re: System to move grain in reply to Goat Squeezer , 09-13-2006 09:44:10  
Its called an auger ;->

If you look around, you can find them...eventually.
I'm not familiar with new prices, though.

The auger pictured is pto drive (and pretty common).
Electric motors are also common. Each have (dis)advantages. I suspect you could rig a small gas engine as well...you would just need to make sure the pulleys / sprockets are sized correctly for 540 rpm going into the auger gearbox.

I've heard about "flex-augers" that essentially bend (slightly) around corners...I will look at one tonight and can give you a better description then.

Nathaniel

[Log in to Reply]  [No Email]
Don-Wi

09-13-2006 10:23:21




Report to Moderator
 Re: System to move grain in reply to Goat Squeezer , 09-13-2006 09:44:10  
You could maybe look for a couple of used hay/grain elevators, or augers (or 1 longer one) and make up a conveyor system. Used elevators are a dime a dozen around here latly because everyone is going to big squares. There are a bunch of smaller augers too that would fit the bill.

Take them off the transport dolley, rig it up on a stand and just have it move the stuf from point A to point B.

Donovan from Wisconsin

[Log in to Reply]  [No Email]
Jon Hagen

09-13-2006 12:39:05




Report to Moderator
 Re: System to move grain in reply to Don-Wi, 09-13-2006 10:23:21  
We use a pair of 90 MM plastic flex augers in our grain cleaner system. They are pretty slick,as they will tollerate several 45 degree bends in the tube if the path from here to there is not a straight line. A new 30 ft unit with either a gear reduction motor head,or a belt drive head runs about $1000 new,so use that to judge fair used price. Check for tube wear in the corners.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy