Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Drill Bits

Welcome Guest, Log in or Register
Author 
Howard H.

09-03-2006 21:07:52




Report to Moderator

Hi All -

Any recommendations for a really good set of general purpose (farm use) drill bits??

I was drilling a bunch of 1/4" holes into some pretty heavy and rough (pipe with angle iron welded onto it) steel - the first bit I had lasted for 30 or so holes, but I don't know what brand it was.

I bought several spares at Walmart and none of them lasted for more than two holes... One wore the end off before it drilled a hole and 3 broke.

My set of Craftsman bits has several missing already from it, too.

I try not to abuse any of my tools, but I also am trying to get something accomplished!

Thanks for any advice,
Howard H.

[Log in to Reply]   [No Email]
Fred Martin

09-04-2006 17:01:02




Report to Moderator
 Re: Drill Bits in reply to Howard H., 09-03-2006 21:07:52  
Howard...I think I"ve tried sharpening a twist drill on a belt sander...seems like it did alright but I think it got hot quicker than an aluminum oxide grinding wheel would. So far the responses are three fellows and George wants to tell us how to sharpen them without rolling them as you go down...like the newer style cobalt split point drills are...and Bernie...I use the tool holder cause usually it is there where it supposed to be but when I sharpen a 2" drill, I use the same method as you...and KEH...when you try this method (and no two machinists are the same but they all get the job done) there is a tool called a drill guage that helps you get the flutes the same length and angle. Might help to acquire one in your travels. I was only kiddin about old George. Fred OH

[Log in to Reply]  [No Email]
Don c

09-04-2006 10:13:27




Report to Moderator
 Re: Drill Bits in reply to Howard H., 09-03-2006 21:07:52  
Hanson is a very good bit



[Log in to Reply]  [No Email]
Howard H.

09-04-2006 09:24:25




Report to Moderator
 Re: Drill Bits in reply to Howard H., 09-03-2006 21:07:52  
Thanks for all the tips!

Dad bought a huge old drill press out of an old foundry - it must weigh 400 pounds - and will gear down as slow as you want to go - it will take up to a Morse taper 4 bit, so I've seen "slower is better" in action... It really curls the chips out!

I'm just using Dewalt hand drill for these - it's a little hard to keep the speed constant, but I have tried not to just burn the ends off.

I'm going to try a set of the Fairbury bits.

Also, Fred, would a belt sander work as well as a grinding wheel for dressing up bits??

HH

[Log in to Reply]  [No Email]
Fred Martin

09-04-2006 07:42:15




Report to Moderator
 Re: Drill Bits (long post) in reply to Howard H., 09-03-2006 21:07:52  
Usually the carbide drills are too easy to break till you get the feel of them...so, high speed would be the next consideration. Cobalt steel is harder and holds an edge longer...but it is so hard it is fairly brittle and should probably only be used in a drill press. What I would have done (as a machinist) is to sharpen the twist drill that drilled the thirty holes...or started asking till I found someone who could sharpen it for me.

How about if I gave a speech on how to grind a twist drill? First, don"t use too fine a wheel or you will get a burned edge and lose the heat treatment out of the edge. Next (for a right handed person) lay the drill on your left index finger and at an angle similar to a new drill next to the grind wheel...turn the drill till the cutting edge is horizontal...straight across with the tool rest...touch the drill to the wheel and rotate and twist at the same time...going down with the right hand...then with the cutting edge as if you were sighting down it...look at the angle from the cutting edge to the heel of the drill...it should be around 8 to 12 degrees slope. If you master this, then do the same to the other flute...but use the same angle (or as close as you can) to the angle of a new drill...and then all you have to concentrate on is to center up the flutes...equal length...and drill. Make sure you have a wheel that is dressed straight across to start with. It will be easier getting started for you to just touch up a slightly dull drill and you will get more confident as time goes by till you can take one of those drills that you really wore the cutting end completely off and get a can of water (don"t get the drill too hot or the thing will crack) and start grinding the whole end off and starting from scratch to put a conplete new cutting edge on it. Lets see how many can follow instructions and do this...it seems to be hard to do for most and it is really just knowing the basics of drill grinding and go for it. have a new drill next to the grinder to compare yours with.

I"d be greatful with all this typing if someone would say that this helped them master this easy task....that looks so complicated. Fred OH

[Log in to Reply]  [No Email]
george md

09-04-2006 15:00:17




Report to Moderator
 Re: Drill Bits (long post) in reply to Fred Martin, 09-04-2006 07:42:15  
Fred ,

If you want your reground bit to look like a new bit , DO NOT rotate the bit . Not rotating gives you the straight line dead center that a new bit has . I had a friend that was a cutter grinder for grummond aviation that taught me how to do it .

george



[Log in to Reply]  [No Email]
`Bernie in MA

09-05-2006 06:25:01




Report to Moderator
 Re: Drill Bits (long post) in reply to george md, 09-04-2006 15:00:17  
I don't rotate them either, didn't catch that. I go down with the right hand as I go up with the left.

Haven't done any more with the gear. Been haying and fixing equipment. Now I'm laid up with a staph infection in my right hand. Can't do anything for a while.



[Log in to Reply]  [No Email]
george md

09-05-2006 20:31:08




Report to Moderator
 Re: Drill Bits (long post) in reply to `Bernie in MA, 09-05-2006 06:25:01  
Bernie,

One of these days we'll catch someone headed
down the road and hitch that gear a ride .Also I
should be in south eastern ny later this year ,
maybe we could meet there.

george



[Log in to Reply]  [No Email]
` Bernie in MA

09-04-2006 12:09:12




Report to Moderator
 Re: Drill Bits (long post) in reply to Fred Martin, 09-04-2006 07:42:15  
It was no help to me except verfy what my friend who worked for Bendix drill taught me years ago. I do it exactly same as you except no tool rest.



[Log in to Reply]  [No Email]
KEH

09-04-2006 08:40:43




Report to Moderator
 Re: Drill Bits (long post) in reply to Fred Martin, 09-04-2006 07:42:15  
I've never been able to master the art of hand sharpening a drill but will try using Fred"s directions.

KEH



[Log in to Reply]  [No Email]
KEH

09-04-2006 08:40:33




Report to Moderator
 Re: Drill Bits (long post) in reply to Fred Martin, 09-04-2006 07:42:15  
I've never been able to master the art of hand sharpening a drill but will try using Fred"s directions.

KEH



[Log in to Reply]  [No Email]
Eddie in MI

09-04-2006 07:18:35




Report to Moderator
 Re: Drill Bits in reply to Howard H., 09-03-2006 21:07:52  
My first inclination is to suggest that you slow your drilling speed down. Others have already commented on cutting fluid. If you want really great drill bits, these have rave reviews on other boards:

http://www.fairburyfastener.com/norseman.htm



[Log in to Reply]  [No Email]
dr.sportster

09-04-2006 07:16:11




Report to Moderator
 Re: Drill Bits in reply to Howard H., 09-03-2006 21:07:52  
If its 1/4 inch you might want to buy by the dozen and make all your pilot holes that size.The pilot bits for holesaws by Greenlee last longer than most others.Try a more exotic cutting oil like Cool Tool maybe also.



[Log in to Reply]  [No Email]
Coloken

09-04-2006 06:52:21




Report to Moderator
 Re: Drill Bits in reply to Howard H., 09-03-2006 21:07:52  
21 piece set of HS on sale at HF this week for 5.99 Get 2 sets.



[Log in to Reply]  [No Email]
the tractor vet

09-04-2006 06:28:14




Report to Moderator
 Re: Drill Bits in reply to Howard H., 09-03-2006 21:07:52  
Myself i get the HHS bits from Ohio Drill in Homeworthe Ohio they are made there and are of outstanding qulity and if i happen to break one i make the 7 mile dirve with my drill indexwalk thru the door open the index up and set it on the counter and say fix it and they will refill it and also sharpen all the bit while i am there and as far as i am conserned they have the best drill out there and there price is with in even a farmer- tractor mechanics budget.

[Log in to Reply]  [No Email]
evielboweviel

09-04-2006 14:00:18




Report to Moderator
 Re: Drill Bits in reply to the tractor vet, 09-04-2006 06:28:14  

look here

Link



[Log in to Reply]  [No Email]
slowfolk

09-04-2006 05:40:46




Report to Moderator
 Re: Drill Bits in reply to Howard H., 09-03-2006 21:07:52  
Use High Speed Steel drill bits for general farm use. They should be available at any hardware store or online at any tool supply store.



[Log in to Reply]  [No Email]
MarkB_MI

09-04-2006 05:31:32




Report to Moderator
 Re: Drill Bits in reply to Howard H., 09-03-2006 21:07:52  
I purchased some cobalt drills from the Yard at very reasonable prices. They also have high speed steel for a little bit less. Their prices are cheap enough you can afford to stock up on the sizes you need the most.

See link below for the Yard.



[Log in to Reply]  [No Email]
Advice

09-04-2006 05:29:17




Report to Moderator
 Re: Drill Bits in reply to Howard H., 09-03-2006 21:07:52  
You can help your drill bits last longer with a bottle of used motor oil used constantly while drilling. You didn't say if you were using oil or not. My 2 cents, sawtooth



[Log in to Reply]  [No Email]
Midwest redneck

09-04-2006 04:37:16




Report to Moderator
 Re: Drill Bits in reply to Howard H., 09-03-2006 21:07:52  
Get HSS drill bits, that stands for High Speed Steel, which is heat treated tool steel. ALL my drill bits for work are HSS.



[Log in to Reply]  [No Email]
BigMarv1085

09-04-2006 03:21:58




Report to Moderator
 Re: Drill Bits in reply to Howard H., 09-03-2006 21:07:52  
I use carbide drill bits. When they get dull, I just take them to work and trade them for new or sharpened ones.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy