Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

McCullough

Welcome Guest, Log in or Register
Author 
RussMO

08-17-2006 16:10:19




Report to Moderator

Well I mistakenly removed the brake housing on my MAC610 and now I can"t put it back to gather again.
I have the owners and parts manual, but they don"t give me enough information to re-assemble.
I have looked on the web for service manuals without any luck.
Does anyone have a diagram or can tell me just how the spring is situated in the housing to activiate the clutch.
Thanks




[Log in to Reply]   [No Email]
Vern-MI

08-17-2006 17:03:01




Report to Moderator
 Re: McCullough in reply to RussMO, 08-17-2006 16:10:19  
Is that the same as a PM610. I have one of those and will look for the manual if it is the same.



[Log in to Reply]  [No Email]
nballen

08-17-2006 16:35:24




Report to Moderator
 Re: McCullough in reply to RussMO, 08-17-2006 16:10:19  
I will take a look at my (much smaller) Mac's tonight...but I would guess that the spring setup is similar. You can try this link and see if this helps...(I didn't find a diagram, but had some intersting info).



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy