Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

What happened to Ingersol Rand?

Welcome Guest, Log in or Register
Author 
jerrycpp

07-22-2006 07:31:33




Report to Moderator

For years I drooled over I-R's 7 1/2 hp air compressor. Now that I can finally afford one, I can't find them anywhere. Harbor Freight used to list them, now I can't even find a dealer. Anyone know what the deal is? I'm in Washington State and would like to buy one.




[Log in to Reply]   [No Email]
cannonball

07-23-2006 04:49:25




Report to Moderator
 Re: What happened to Ingersol Rand? in reply to jerrycpp, 07-22-2006 07:31:33  
Tractor Supply carries them here in texas... check out Link don't over look champion have two pumps here that are about 28 years old and have had nothing done to them and one sits outside on truck with gasoline engine that is a 1982 briggs... may God bless the USA



[Log in to Reply]  [No Email]
Glenn F.

07-22-2006 19:45:05




Report to Moderator
 Re: What happened to Ingersol Rand? in reply to jerrycpp, 07-22-2006 07:31:33  
My vote is DEFINATELY for the Quincy. We have had both (5 hp. units with matching specs) and the Quincy worked circles around the IR and lasted twice as long doing it. These units were in a body/mechanical shop. The Quincy was the lead compressor, and the IR for when the pressure dropped. Both were well maintained. The IR "always" had some issue. The Quincy just kept loping along year in and year out. They are TOUGH machines. They also have, by far, the best resale.

Glenn F.

[Log in to Reply]  [No Email]
ldj

07-22-2006 15:39:19




Report to Moderator
 Re: What happened to Ingersol Rand? in reply to jerrycpp, 07-22-2006 07:31:33  
Just for those interested in Ingersol Rand, I have an interesting compressor. It is a 6 cylinder radial engine/compressor. When most folks see it they think it is an old aircraft radial engine. It runs on 3 cylinders and pumps air on 3 cylinder. It is 36CFM, quite a compressor.



[Log in to Reply]  [No Email]
Gardner-Denver

07-22-2006 14:52:36




Report to Moderator
 Re: What happened to Ingersol Rand? in reply to jerrycpp, 07-22-2006 07:31:33  
You may want to consider a Gardner-Denver. I think it is mostly American made and check warranty too. Just a thought.....



[Log in to Reply]  [No Email]
Jay87T

07-22-2006 13:15:43




Report to Moderator
 Re: What happened to Ingersol Rand? in reply to jerrycpp, 07-22-2006 07:31:33  
Get a Devair, Canadian made!!! very nice compressor.



[Log in to Reply]  [No Email]
dr.sportster

07-22-2006 13:00:18




Report to Moderator
 Re: What happened to Ingersol Rand? in reply to jerrycpp, 07-22-2006 07:31:33  
I dont know but the corporate H.Q.of Ingersol -Rand in New Jersey is now a BMW training center.BMW is some kind of crappy German car and motorcycle company which you probably already know.Bowel Movement On Wheels is the english translation I think.Building sat empty for years after I-R moved.



[Log in to Reply]  [No Email]
Steve Crum

07-22-2006 11:33:47




Report to Moderator
 Re: What happened to Ingersol Rand? in reply to jerrycpp, 07-22-2006 07:31:33  
Good luck, IR is now owned by a company in England. The local air tool division in Athens is sweating bullets to see if the plant will remain open another year. The compresser division in Painted Post is gone. Most of what IR sells is made in China and if you look close at the packaging most of the hubbub of 'made in USA' means assembled in USA. The new owners are riding the IR name for as long as they can get away with selling Chinese quality at USA made prices. Had it not been for NASCAR telling IR to get their heads out of their a** and make a 1/2" gun that works, The Thunder Gun would not have happened and most of what's left of the IR would have shriveled on the vine.

[Log in to Reply]  [No Email]
Mark - IN.

07-23-2006 04:56:05




Report to Moderator
 Re: What happened to Ingersol Rand? in reply to Steve Crum, 07-22-2006 11:33:47  
That's kind've funny and sad at the same time. A few years ago I bought my Mom a small compressor to pressurize her water tank from time to time when it'd water log. Just a tiny thing, but is/was Hausfeld-Cambell, or Cambell-Hausfeld (which ever without going out to look). I told her "No made in China crap". A week or so later when I was at her (then) house, she showed me the box...made in China. My older one sure isn't/wasn't. Them son of a guns are into everything anymore. It just don't end, not with them guys.

Mark

[Log in to Reply]  [No Email]
Cliff Neubauer

07-22-2006 11:16:47




Report to Moderator
 Re: What happened to Ingersol Rand? in reply to jerrycpp, 07-22-2006 07:31:33  
Just make sure you get the commercial model and not one of the cheaper ones. A few years ago they started making the models sold at farm supply stores and the like to be cost competitive with some of the cheaper brands and they are nowhere near as good as the old T-30 models. We've got a 2hp 80 gallon T-30 that's at least 10 years old with no problems but if I was to buy a new one I would probably go with the Quincy's for the pressure lubrication.

[Log in to Reply]  [No Email]
george md

07-22-2006 13:02:10




Report to Moderator
 Re: What happened to Ingersol Rand? in reply to Cliff Neubauer, 07-22-2006 11:16:47  
Cliff,

T-30 is the junk I was describing,The rest

is even lower quality.

george



[Log in to Reply]  [No Email]
RoH

07-22-2006 17:00:05




Report to Moderator
 Re: What happened to Ingersol Rand? in reply to george md, 07-22-2006 13:02:10  
Geez, Cliff is right. The T-30 is a great pump. Obviously you are either an idiot or have an agenda.



[Log in to Reply]  [No Email]
Don't know

07-23-2006 04:57:53




Report to Moderator
 Re: What happened to Ingersol Rand? in reply to RoH, 07-22-2006 17:00:05  
obviously you don't know anything about George. He is one of the most talented machinists that I have ever known.



[Log in to Reply]  [No Email]
george md

07-23-2006 21:25:22




Report to Moderator
 Re: What happened to Ingersol Rand? in reply to Don't know, 07-23-2006 04:57:53  
Thank you sir , not sure I deserve all that .

Obviously , he has never been inside of a T-30

or he would not be so proud of them . I had two

of them , one bkoke the crank and I got rid of

the other one when I had a fellow that wanted it

worse than I did .

george



[Log in to Reply]  [No Email]
XRogerX

07-24-2006 18:14:53




Report to Moderator
 Re: What happened to Ingersol Rand? in reply to george md, 07-23-2006 21:25:22  
A lot of IR's have been promoted a HP range or so and sped up to keep the delivery respectable. Even some of the older IR 7 1/2 units were trouble. It seemed like the crank bearings for this unit were still sized for 5hp, or something, since many of them trashed their inner crank roller bearings, often taking the case out at the same time. There was also a company out of Israel called Oholiab which built bolt for bolt copies of T30's which were nowehere near as good. Most of the older ones were pretty tough units though.

[Log in to Reply]  [No Email]
Broomstacker

07-22-2006 10:00:46




Report to Moderator
 Re: What happened to Ingersol Rand? in reply to jerrycpp, 07-22-2006 07:31:33  
I kinda agree with George. Machine shop I did some work for bought a new IR 7 1/2 horse vertical. It supplied 3 CNC machines and general shop air at 90psi. Ran for 4 months and literally wore itself out, started hammering and clanking like it was 20 years old. Don't think they're made like they used to be.



[Log in to Reply]  [No Email]
Bill(Wis)

07-22-2006 09:36:17




Report to Moderator
 Re: What happened to Ingersol Rand? in reply to jerrycpp, 07-22-2006 07:31:33  
IR has a home page on their website or call 1-800-TOOL.



[Log in to Reply]  [No Email]
John Avery

07-22-2006 09:27:41




Report to Moderator
 Re: What happened to Ingersol Rand? in reply to jerrycpp, 07-22-2006 07:31:33  
Try the yellow Pages there is an Ingersol Rand factory store in Kent or Auburn WA



[Log in to Reply]  [No Email]
george md

07-22-2006 09:24:26




Report to Moderator
 Re: What happened to Ingersol Rand? in reply to jerrycpp, 07-22-2006 07:31:33  
Jerry,

Do yourself a favor and go buy a Quincy . Many reasons for the opinion, IR is splash oiled , quincy is pressure oiled , IR uses an overhung crank , quincy puts a bearing on each side of the rods. I think IR is riding their name and the quality is droping , soon to be down to match the made in china ones . I had one IR , there will not be another. I also have an old curtis and an old champion , both were quite old when the IR got here and are here long after the IR has gone . Quincy replaced the IR and I will soon add another quincy to the air supply .

george

[Log in to Reply]  [No Email]
Midwest redneck

07-22-2006 08:31:59




Report to Moderator
 Re: What happened to Ingersol Rand? in reply to jerrycpp, 07-22-2006 07:31:33  
Check Grainger supply, I am sure they sell them, Horizontal, vertical, up to 15 or so HP.



[Log in to Reply]  [No Email]
Buzzman72

07-22-2006 08:26:26




Report to Moderator
 Re: What happened to Ingersol Rand? in reply to jerrycpp, 07-22-2006 07:31:33  
Saw some the other day when I was at Tractor Supply...might start there.



[Log in to Reply]  [No Email]
John Adamson

07-22-2006 07:38:59




Report to Moderator
 Re: What happened to Ingersol Rand? in reply to jerrycpp, 07-22-2006 07:31:33  
Northern Tool still sells them. I bought one for our shop.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy