Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Stuck Rings (no tractor content)

Welcome Guest, Log in or Register
Author 
XRogerX

07-04-2006 09:37:12




Report to Moderator

Hey folks, I have bargained for a low mileage motorcycle. It's a 1983, with only 4000km on it, but it smokes (probably a too hasty storage). Does anybody have a suggestion for a liquid piston ring remedy I could try before committing to a teardown? Marvel Mystery Oil? Seafoam? Thanks.




[Log in to Reply]   [No Email]
Billy NY

07-06-2006 19:42:46




Report to Moderator
 Re: Stuck Rings (no tractor content) in reply to XRogerX, 07-04-2006 09:37:12  
Is that a 750 Maximum ? I've got a pair of 650's, 1980 and 1981, they were a reliable bike, I had a lot of fun them, been 13 years since I rode them.

Must have gotten moisture in the bores, hard to say what will work to re-seat the rings, not sure if the cylinders can be adversely affected,like being scored, might have to do the tear down, although I'm no expert on these little 4 cylinders, but when running good, they sure were a reliable form of transportation, when I had no car or truck, I got by on one of these.

[Log in to Reply]  [No Email]
Billy NY

07-06-2006 19:47:42




Report to Moderator
 Re: Stuck Rings (no tractor content) in reply to Billy NY, 07-06-2006 19:42:46  
Missed that, it's definitely a 750, my best friend had a pair of 750's, one a 1982 just like that one, bought new in '86 as a leftover for $2000, not bad considering, they do have some appreciable power, and handle well.



[Log in to Reply]  [No Email]
Steve Crum

07-04-2006 19:01:54




Report to Moderator
 Re: Stuck Rings (no tractor content) in reply to XRogerX, 07-04-2006 09:37:12  
Soak it with trans fluid overnight, then change the oil (put in a good high detergent oil) and take it for a 50 or so mile ride. Carry some spare oil with you and check every so often. Decent 2 lane back roads work good, the varying speeds and engine temp will work the stuck rings loose. Sunoco Ultra 94 gasoline is a great help too. And you have a good excuse to take a ride.



[Log in to Reply]  [No Email]
XRogerX

07-04-2006 14:26:34




Report to Moderator
 Re: Stuck Rings (no tractor content) in reply to XRogerX, 07-04-2006 09:37:12  
third party image

Ok,Thanks for the advice. I'm pretty sure I'll need to re-ring the bike, but I figured I'd try something easy first. It's a 1983 XJ750MK Midnight Maxim. I was going to use the motor for parts for my old Seca turbo, but it is in such good shape, and with such low miles, I think I'll get her running right, then either sell it for a profit, or keep it. It would be the lowest mileage bike I'd have owned so far.

[Log in to Reply]  [No Email]
dr.sportster

07-05-2006 18:32:20




Report to Moderator
 Re: Stuck Rings (no tractor content) in reply to XRogerX, 07-04-2006 14:26:34  
Wow,looks brand new.Good luck.If you test ride just bring some spare plugs.A good ride might free it up[like someone already said].Hasnt really gone out of style either,although the seat looks huge but comfy.



[Log in to Reply]  [No Email]
T_Bone

07-07-2006 01:12:19




Report to Moderator
 Re: Stuck Rings (no tractor content) in reply to dr.sportster, 07-05-2006 18:32:20  
Hi Roger,

Nice looking bike!

I"ve used Berryman B12 and wacthed carbon melt before my eyes. Really great for a injector cleaner and it works so fast. I really don"t think it"ll leak past the top ring or it will stop at the compression ring unless you tear it down. It might unstick a ring but doubtful. Maybe lay the bike on it"s side(s) while soaking?

T_Bone



[Log in to Reply]  [No Email]
TimV

07-04-2006 11:22:28




Report to Moderator
 Re: Stuck Rings (no tractor content) in reply to XRogerX, 07-04-2006 09:37:12  
Roger: PB Blaster is another choice--if it doesn't work, you're out less than $5.00 even if you use a whole can. I'm not sure if MMO will do the trick--it's great for keeping things working, but I've never had much luck un-sticking things with it. On the other hand, a few easy miles with some MMO in the tank might persuade the rings to see things your way! I'm looking at a '79 Yamaha XS11 right now myself--last on the road in 1997.

[Log in to Reply]  [No Email]
dr.sportster

07-04-2006 10:56:00




Report to Moderator
 Re: Stuck Rings (no tractor content) in reply to XRogerX, 07-04-2006 09:37:12  
What kind of bike is it?



[Log in to Reply]  [No Email]
old

07-04-2006 10:47:01




Report to Moderator
 Re: Stuck Rings (no tractor content) in reply to XRogerX, 07-04-2006 09:37:12  
Fill the cylinders up with tranny fluid, then let it sit a day or 2 and then turn it over with the plugs out, it will make a mess by the way. If that doesn't help nothing other then new rings will do it. Tranny fluid works better, cost less and has never done but one of 2 things for me. Worked or it was time for rings



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy