|
Mark - IN.
05-31-2006 17:20:49
|
|
Re: Where to find metric hydraulic fittings in reply to chuckinnc, 05-31-2006 07:28:09
|
|
| |
Me neither, on anything. But this post has me thinking. I needed to grease some zerks on a tractor this last weekend, and do you think that I could find any one single grease gun? Nope, but are at least two of them somewhere that will show up eventually. My local parts store and gun shop was closed, so for a change went to Walmart for shells and a grease gun. Got home, put the tube in, put it on the first zerk, filled it with grease, and then had to fight to get the tip off of the zerk. Twisted, tilted, and thought the zerk was going to break off with as hard as I was twisting and pulling, but it came off eventually. Had about 20 to do, and faught getting that darn thing off each and every last one. I never saw anything like it in my life. I weigh 240 and could've hung from each zerk if were facing down and up high enough. I'm thinking that he's referring to the hole being tapped for metric, I can't imagine anything else about a zerk or gun being metric, or metric at all. I gotta find my others, and that one's gotta go, or get a new tip. I got it from Walmart and figure its Chinese without looking first, and figure they do things to the stuff we buy just to make our lives rough for a laugh. Mark
|
|
|
