Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Thought I got a deal, now not so sure..

Welcome Guest, Log in or Register
Author 
XRogerX

03-27-2006 18:07:26




Report to Moderator

third party image

This is a DeWalt DW508S, made in Brasil. It looks a bit like the DW511 with a different gearcase.

Since school is almost out, and my frugality (cheapness heh,heh) has left me with a bit more cash than I had anticipated, I decided to treat myself to some new tools. Got a flyer last week showing a DeWalt 1/2" VSR hammerdrill going for $84, regular price $130. Not bad, I figure. I like the look and feel of Milwaukee tools, but DeWalt seems to have a decent reputation, so I thought I'd take a look. Perusing the drills on offer, I was saddened to see none were made here (Canada), but that seems to be par for the course, so I figure the next best thing would be a decent American made tool. Seems like American workers could use a bit of support, if I can't help anyone here. No luck, the DeWalts were made in Mexico or Brasil, the Bosch in Malaysia, the Mastercraft in China, and the Jobmates are well known for being junk around here, so I didn't bother looking. I did notice the Black and Decker mentioned Towson, Maryland, but I didn't know if it was head office, or manufacturing facility. No matter, it was big and bulky and not particularly robust looking anyway. A few DeWalt angle grinders had Maryland stamped on them ($49 for a DeWalt 4 1/2" angle grinder seemd pretty good too), so I guess they still make some stuff stateside. The store has dropped the Milwaukee line of tools completely, sad to say. There's something about them and Porter Cable that says "serious tool" to me, although I readily admit my ignorance. Long story short, I bought the DeWalt 1/2" drill on special. There were also $20 mail in rebate forms to send in (I know, I know, been down that road, a 10 week wait for a $20 cheque seems a bit much). Anyway, I go to the DeWalt website to check it out and it's nowhere to be found. A quick Google search turns up DeWalt Brasil (not surprising since it's made there). I seem to remember someone here remarking that DeWalt was bringing out a lesser series of tools under the same name. Could this be one of them? Even so, do you think it would still be a decent tool? $64 is pretty cheap for a VSR hammerdrill. It has a three year warranty, which seems pretty good. I'm within walking distance of the store, so returning it would be no hassle. To be brutally honest, the drill will be seeing light(ish) use anyway, repairs mostly, to home and vehicles. I could get away with cheap tools, but after doing without for a long time, I've sworn to myself that I would try to get the best of whatever I wanted, if the price was right.

I notice the local pawn shop has some Milwaukee magnums for $38, lightly used...

[Log in to Reply]   [No Email]
CK from ON, Canada.

03-30-2006 16:23:13




Report to Moderator
 Re: Thought I got a deal, now not so sure.. in reply to XRogerX, 03-27-2006 18:07:26  
I have the same Milwaukee Hammer drill as George, and it can't be beat. I've used others and they haven't held up. That Milwaukee is definitely not like other Milwaukees I've got, you can clearly see it, but its tough as the day is long. Used it to hammer drill about 10-5/8" holes through 8" poured concrete- it outlasted me, my wrists and forearms were useless the next day. German made and built like a brick $hithouse. I used my share of cheap tools and won't touch them since I had Milwaukees.

[Log in to Reply]  [No Email]
Dachshund

03-28-2006 17:57:56




Report to Moderator
 Re: Thought I got a deal, now not so sure.. in reply to XRogerX, 03-27-2006 18:07:26  
I've been using DeWalt tools for several years (commercial application) and have never had any problems with ANy of their tools other than the 18v cordless stuff - went to the 14.4v and problems were solved. I even have the original battery I bought with my first 14.4v drill - in 1997. The 18v stuff didn't last a year.



[Log in to Reply]  [No Email]
dr.sportster

03-28-2006 15:30:12




Report to Moderator
 Re: Thought I got a deal, now not so sure.. in reply to XRogerX, 03-27-2006 18:07:26  
Hey,My company sent out a new Milwaukee hammer drill today I requested.Made in CZECH REPUBLIC.didnt think to look until late afternoon. I thought of your post.The other Milwaukee just said Brookfield but no country of origin.Meanwhile millwrights drilled[large Hilti] into a 277 volt lighting circuit prepping ceiling for a conveyor.Good for a little O.T.



[Log in to Reply]  [No Email]
Kevin Bismark

03-28-2006 17:37:25




Report to Moderator
 Re: Thought I got a deal, now not so sure.. in reply to dr.sportster, 03-28-2006 15:30:12  
Did it get their attention?? Had some guy saw cut through a pipe with a 400 amp 480 volt feeder in it, when I got their I asked them if they herd it over the saw scared the hell out of them, vaporized a big chunk out of the saw blade, the best part was if they would have had one of us come out BEFORE we would have told them where it was, you could see where it went down and came up, had fun patching that one..
Kevin

[Log in to Reply]  [No Email]
Dr.EVIL

03-28-2006 13:48:19




Report to Moderator
 Re: Thought I got a deal, now not so sure.. in reply to XRogerX, 03-27-2006 18:07:26  
About two years ago Black & Decker bought Porter-Cable & Delta Tools so now P-C & DeWalt are related. I have a LOT of DeWalt tools, last 5-6 years I bought lots of P-C tools.... I just bought My first Milwaukee Magnum 4-1/2" angle grinder a couple months ago. Not many hand tools still made in the US or Canada at all anymore.



[Log in to Reply]  [No Email]
Kelly Campbell

03-28-2006 10:02:23




Report to Moderator
 Re: Thought I got a deal, now not so sure.. in reply to XRogerX, 03-27-2006 18:07:26  
Hey, I've got one just like that....works pretty darn good to, used it while drilling into old oak and concrette block, not had one problem out of it.



[Log in to Reply]  [No Email]
TomR Ont

03-28-2006 09:05:06




Report to Moderator
 Re: Thought I got a deal, now not so sure.. in reply to XRogerX, 03-27-2006 18:07:26  
XrogerX, seeing you�re from Canada you also paid 15% tax on the $20.00 over charge. Not long ago, every thing had to have Made In ?? or Printed In ?? on the package, but now I notice some big stores just put Imported for ?? on the package. So you don�t know it was made in India, Mexico, Brazil or where ever, until you open the package.

My wife bought some Green Giant frozen carrots, along with some other Green Giant frozen products, when she cooked the carrots there was a terrible chemical taste. I checked the package; it had a small computer printed line that said PRODUCT OF BRASIL.
I guess we in Canada or the USA can�t grow carrots cheep enough for the multinational companies. The Company sent her some coupons to compensate her, but why Brazil for frozen carrots.

[Log in to Reply]  [No Email]
T_Bone

03-28-2006 08:17:16




Report to Moderator
 Re: Thought I got a deal, now not so sure.. in reply to XRogerX, 03-27-2006 18:07:26  
Hi Roger,

I spent some time a couple years ago looking over new electric tools. Makita won hands down accross the board as they use metal gears in just about every tool they build in "CHINA". Yep it's hard to buy anything USA. Makita's overall tool quality has not changed since the 80's as I still have several USA made Makita tools to compare with.

Milwaukee just couldn't compete with Makita on the tools I bought and I'm a die hard Milwaukee fan. I have no idea what there tools are like now there Japan owned.

I just never was a Dewalt fan as they wouldn't hold up on the commerical use end and normaly had a grip that wouldn't fit my hands.

T_Bone

[Log in to Reply]  [No Email]
scott#2

03-27-2006 19:48:35




Report to Moderator
 Re: Thought I got a deal, now not so sure.. in reply to XRogerX, 03-27-2006 18:07:26  
It'll be just fine. I use the 18 volt portable stuff daily and abuse it at least every other day. I just got a new 18v vsr hammer and I dont hold back. I drill 1/2" holes through brick and block walls every day and at times use up 3 batteries in about an hour doing so. Time will tell how this brazil stuff holds up but so far so good and its hit the ground a few times as well from atop a 6' ladder. I hate to see what used to be american tools with another country stamped on them but thats the way it is these days. Actually brazil is putting out some pretty decent stuff. Its just cheaper to make there. Car parts from brazil used to be junk, now not so much.

scott#2

[Log in to Reply]  [No Email]
dr.sportster

03-27-2006 18:29:26




Report to Moderator
 Re: Thought I got a deal, now not so sure.. in reply to XRogerX, 03-27-2006 18:07:26  
Stop worrying.If you dont dog it down with something like large hole saws and just let it do the work it will probably be fine.How about my Milwaukee chop saw made in Japan.I was real mad when I saw that label [after purchase], even wrote them a letter and got a response but it still works many years later.



[Log in to Reply]  [No Email]
Charles (in GA)

03-27-2006 18:27:55




Report to Moderator
 Re: Thought I got a deal, now not so sure.. in reply to XRogerX, 03-27-2006 18:07:26  
For that once or twice a year when you need to drill a hole for a couple of concrete anchors, it will probably be just fine. As a drill, again, you won't be using it every day.

I paid about $150 about six years ago for a Milwaukee VSR hammer drill, big and heavy but real tough, German made. Really like it but haven't used the hammer feature since about a week after I got it.

Charles



[Log in to Reply]  [No Email]
Jeff Oliver

03-28-2006 18:50:27




Report to Moderator
 Re: Thought I got a deal, now not so sure.. in reply to Charles (in GA), 03-27-2006 18:27:55  
not sure how many Milwakee tools are built in the USA anymore but I know quite a few of the cast parts with their name on them are as I saw alot of them at the painters in Arkansas a couple of weeks ago. heck so many things built here are made from imported parts I am not sure if yo ucna buy anything truly americam made anymore



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy