Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Mig Welder

Welcome Guest, Log in or Register
Author 
Gus

03-04-2006 05:59:55




Report to Moderator

Thanks for all the feedback on the mig. I will look in to the 210 Miller. Sounds like the way to go. Pricey compared to my Arc, but probably the last one I'll ever buy. Gus




[Log in to Reply]   [No Email]
Tim...Ok

03-06-2006 14:49:49




Report to Moderator
 Re: Mig Welder in reply to Gus, 03-04-2006 05:59:55  
Gus, If that Miller 251 is an option,it's a darn good machine..I bought a 250x a few years ago with the idea of using it for lighter jobs and my trusty Lincoln arc for the heavier work..I've fired up the Lincoln twice in about 3 years..once I ran out of wire late on a sunday night and the job HAD to go out monday morning,2nd time was just too big to fit thru my shop doors..I was a little hesitant to spend the $$$ for it,but it paid for itself on the first 2 jobs I did with it..

Tim,part time welder

[Log in to Reply]  [No Email]
Stan in Oly, WA

03-05-2006 11:18:18




Report to Moderator
 Re: Mig Welder in reply to Gus, 03-04-2006 05:59:55  
Hi again, Gus

I agree with BFO that more is better when buying a MIG welder, and I'm sure you'd be happier with a 250A machine than with 210A. But although time is money, and money is time, you often don't get to exchange one for the other right when you need to. It can be risky to make an expensive purchase when money is tight, and there's no way to predict what the payback period will be. Buying on credit and hoping for the best sinks as many people as it saves.

Here's a suggestion that condradicts much of what I've said previously in this (and other) posts. You can buy a new-in-the-box Lincoln SP 175 Plus (not the Pro-MIG 175, which is a less versatile machine) on eBay for around $600 any day of the week. Shipping is around $40---less than the tax you'd pay at retail. The 175 Plus is perfectly adequate for light fabrication, and perfect for thin material. For heavier work, you've still got stick. Just a thought.

You mentioned taking on more work for other people if you could be more certain of the strength/safety. My unsolicited advice on that issue is, be careful. If you build someone a garden gate and it breaks, you'll have to fix it. If you repair someone's vehicle or trailer and it fails on the highway, lives could be ruined, including yours.

Free advice is worth as least as much as you paid for it. Hope I've given good value.

All the best, Stan

[Log in to Reply]  [No Email]
BFO

03-05-2006 05:35:08




Report to Moderator
 Re: Mig Welder in reply to Gus, 03-04-2006 05:59:55  
I will respectfully disagree, once you've caught on to the process, you'll soon see the limitations of this welder. I would suggest (only if it's affordable) to get the 251. Or do a comparison with Lincoln's PowerMig 255. My bias is toward Lincoln, but that's just because I a have a few Lincolns. HTH



[Log in to Reply]  [No Email]
Gus

03-05-2006 06:29:02




Report to Moderator
 Re: Mig Welder in reply to BFO, 03-05-2006 05:35:08  
Affordability is a concern here. My business hasn't been the best lately. But what would some of the limitations be? Most of my welding is fixing, repairing. Some new fabrication on occasion. Would probably do more if I could weld thin material and stuff for other people if I was more certain of strength/ safety.



[Log in to Reply]  [No Email]
BFO

03-05-2006 06:45:25




Report to Moderator
 Re: Mig Welder in reply to Gus, 03-05-2006 06:29:02  
Well the 210 will do thin stuff no problem, all day long. If that's the majority of your work then I say go for it. But for thick section repairs and fabrication, you'll have the power and duty cycle in the larger machines. Plus you'll have the capability to run wires like .045 71M gas shielded flux core. Plus you'll have the capability to change your rolls and go back to some .023 or .30 Er70-6 solid wire and weld the thin stuff. Versitility. Hope your business picks up.

[Log in to Reply]  [No Email]
Stan in Oly, WA

03-04-2006 12:17:03




Report to Moderator
 Re: Mig Welder in reply to Gus, 03-04-2006 05:59:55  
Hi Gus,

You got some good input on the topic, but I second T_Bone's suggestion that you spend some time going through the archives to read what people on this forum have said about MIG welders over the past few years. There are a surprising number of reasonable considerations that you may have never thought of.

In general, my advice merely repeats what you have already received from a number of people. Spend the money to get the best welder you can afford. First choice Miller, second choice Lincoln, third choice Hobart. I love Lincoln welders and own several (and no Millers), as well as a Hobart AC/DC arc welder, but I have to grudgingly concede that in MIG technology, Miller seems to have a slight edge. (I know that Hobart is now a division of Miller, but Hobart isn't making the high end stuff.)

Get the best and most powerful welder you can afford (stretch a little.) The first time is the cheapest it will ever be to get new equipment. This isn't a computer; it's not becoming obsolete as you wheel it to the car. A first rate welder might easily last you the rest of your life. Viewed that way, the cost per year might be very modest.

Good luck, Stan

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy