Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

hand tools

Welcome Guest, Log in or Register
Author 
cr2n

02-03-2006 08:54:47




Report to Moderator

redoing a 2n. what size wrenchs or sockets over1"will I need to work on tractor. have basic hand tools up 1". new to tractor work thank you for any help.




[Log in to Reply]   [No Email]
Charles (in GA)

02-03-2006 20:05:37




Report to Moderator
 Re: hand tools in reply to cr2n, 02-03-2006 08:54:47  
Old Fords use alot of 1-1/16" nuts.

Charles



[Log in to Reply]  [No Email]
Roy Suomi

02-03-2006 17:19:11




Report to Moderator
 Re: hand tools in reply to cr2n, 02-03-2006 08:54:47  
You pretty much have it all.The axle nut is a biggie. I use a big truck axle nut socket available from truck parts distributer , cut the center ouy of it and weld a handle on the side of it to reseal axle seals.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy