Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Torque specs on Compressor Manifold?!

Welcome Guest, Log in or Register
Author 
tino

02-02-2006 23:09:59




Report to Moderator

Hey guys I am rebuilding my craftsman 240V 6hp and wondering if any one the torque specs of the manifold. I have only found the specs for the motor side of the compressor. Any one know?

Part #: 919152930




[Log in to Reply]   [No Email]
Tim Casbolt

02-05-2006 18:20:25




Report to Moderator
 Re: Torque specs on Compressor Manifold?! in reply to tino, 02-02-2006 23:09:59  
If you can't find specs for the item itself, you can always fall back on the standard torque specs for the size and type of bolt. These are listed in Machinery's Handbook. Most 1/4" bolts are about 17 ft/lbs., 5/16" are 25-30, 3/8" are 45-50 7/16" are 65-70, etc. Should be close enough.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy