I am planning to attend an auction next week in hopes of picking up a MIG or multi-function welder at a good prices. Below is a list of the machines available (as listed on auctioneers web site); I�d appreciate any comments from those that are familiar with them, or similar machines.I am looking for any advice as to whether these machines are suitable for a home shop, so my main concern is the machine will run on a residential electric service: i.e., single phase, 220 volt, 50 amp (more or less). Also would like to be able to weld fairly thin (maybe 1/16) to fairly thick (maybe � inch) mild steel, and set it up for aluminum some day. Any opinions about how much they maybe worth, assuming they are in working condition, would also be appreciated. Thanks in advance. Miller Syncrowave 250 constant current, AC/DC mig/tig w/ Miller S22A wire feeder. Airco CV 300II AIRCOMATIC power supply w/ AIRCOMATIC Mighty wire feeder. Airco CV600 FC-DIP Arc Welding Power Supply w/ AIRCOMATIC Mighty wire feeder. Miller 330ST AIRCRAFTER Constant Current AC/DC power supply, 450 Amp capacity w/ Bernard Chiller and wire feeder Airco ESAB welding power supply CV450 w/ Lincoln Electric wire feeder. Miller XMT300 CC/CV DC Inverter-type Arc Welder w/ Auto-Link
|