Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Air Compressor

Welcome Guest, Log in or Register
Author 
LBH

08-16-2005 19:24:32




Report to Moderator

I am fixing to buy an air compressor. I am looking at a NAPA gas one. I am not going to use it on a daily bases so I don't have to have the best but I don't want a cheap one either. I just want a good quality that will last a good while. How much pressure do you have to have to run an paint gun, air ratchet, air drill, air sander. Remember I won't be using it all the time. I don't mind having to wait everynow and then to catch up.

[Log in to Reply]   [No Email]
LBH

08-16-2005 19:26:10




Report to Moderator
 Re: Air Compressor in reply to LBH, 08-16-2005 19:24:32  
Attributes: Air Compressor Gas or Electric: Gas Stage Type: Dual Stage Horsepower: 8 HP Tank Type: Horizontal # of Cylinders: 2 Additional Contents: Compressor CFM Pump Displacement: 19.5 Engine Type: Briggs & Straton Height: 39'' Length: 39.5'' Lubrication System Type: Splash Magnetic Starter Required: No Maximum Pressure: 175 psi Pump Material: Cast Iron Pump RPM: 1300 SCFM Rating: 13.5 Series: Performance Tank Capacity: 30 gal Type: Reciprocating Weight: 300 lbs Width: 19''


This is the compressor I am leaning too.

[Log in to Reply]  [No Email]
Charles (in GA)

08-16-2005 20:14:50




Report to Moderator
 Re: Air Compressor in reply to LBH, 08-16-2005 19:26:10  
You don't say why you want gas, but you would be much better off with electric if you can. Why do you want another gas engine to maintain. Plus the noise and fumes, etc. while you are using it.

8 hp gas is equal to 4-5 hp electric.

Why not a 5 hp dual stage, 175 psi, 80 gal tank electric unit. It has about the same specs for $1000 to $1500 depending on options and brand.

19 cfm is lots of air, will run a blast cabinet, paint all day long (though nowdays you are better off with an HVLP paint system), run a 3/4 or 1" inpact, lots of stuff.

I have a 7.5 hp dual stage, 80 gal vertical compressor, 24 cfm, cost me $1600, now a tad bit more. If I need to go portable, I kept my old 2 hp, 12 gal sears compressor. It runs on 110 and will work fine off a 100 ft 12 gauge extension with acceptable voltage drop. Besides, air hose is fairly cheap too.

For just general working around the shop, I seriously rethink the gas engine thing.

Charles

[Log in to Reply]  [No Email]
LBH

08-17-2005 17:29:55




Report to Moderator
 Re: Air Compressor in reply to Charles (in GA), 08-16-2005 20:14:50  
Well,

I wanted to be able to use it at my farm every now and then. I don't have power their. So, does this air compressor that is gas does it automatically kick on when it gets low or do you have to start it again? Also, what is the difference in dual stage and single stage air compressor?
Which one uses less power and which one doesn't surge power either.

LBH



[Log in to Reply]  [No Email]
Charles (in GA)

08-17-2005 17:59:59




Report to Moderator
 Re: Air Compressor in reply to LBH, 08-17-2005 17:29:55  
We use these compressors at work. The engine runs all the time. When the tank reaches 175, the unloader idles the engine back down, and unloads the compressor. When the pressure gets down to the kick in pressure the engine speeds back up and the unloader closes so the pump can bring the tank pressure up. The tank is small, 30 gal, but since the engine runs all the time, it doesn't matter much how frequently it cycles.

With two stage you get 150 to 175 psi and use a regulator to reduce the pressure to about 100, normal shop pressure for air tools (most air tools are rated at 90 psi). With single stage compressors, the high pressure is about 125 and the low side kick in pressure is at or below the normal shop pressure. Two stage is much more stable pressure to the user and the higher tank pressure allows more time between cycles (important on an electric compressor, no so much on the gas one.)

Thats alot of compressor and you certainly will not run out of air. That is the type you see on field service trucks for heavy equipment and come to the truck stop truck and tire service trucks.

Charles

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy