Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Harbor Freight Tools

Welcome Guest, Log in or Register
Author 
Illinois Boy

07-27-2005 06:57:01




Report to Moderator

Looking at an impact tool at Harbor Freight. Are these tools any good? Prices are really good, but I'm a little leary. I wouldn't be using it everyday in a professional way - just when I need to do some home mechanic work!!
I'd rather spend a little more for something that will work more than once or twice and then thrown away!!




[Log in to Reply]   [No Email]
Big Jim

07-27-2005 19:53:59




Report to Moderator
 Re: Harbor Freight Tools in reply to Illinois Boy, 07-27-2005 06:57:01  
Most Harbor Freight stuff is not industrial duty. If you need an everyday tool, they aren"t a good choice. On the other hand, I have a bunch of HF tools in my shop. Many of them, I could not afford the commercial eqivalent. My $150 press does everything I need as well as a $600 OTC and, because of the cost, I can have it in my personal shop. I"ve been using one of their hi-torque 1/2 impacts for a couple of years now with no complaints. I"m sorry but I think "Buy American" is little more than a joke because so much name brand stuff is actually imported now. eBay has some great bargins on good tools but you have to be willing to wait to find them. HF will serve the light to medium user just fine.

[Log in to Reply]  [No Email]
havvey

07-27-2005 17:57:25




Report to Moderator
 Re: Harbor Freight Tools in reply to Illinois Boy, 07-27-2005 06:57:01  
junk buy american



[Log in to Reply]  [No Email]
Glen in TX

07-27-2005 17:10:39




Report to Moderator
 Re: Harbor Freight Tools in reply to Illinois Boy, 07-27-2005 06:57:01  
HF has been mail order out of Calif. for years. Got one of their 3/4 long shank impacts I've been using for about 15 years but I don't use it everyday either and it still works good but I oil it and take care of it too. If it doesn't turn it I get out the 1" drive I got from HF 3 years ago and use it. The impact sockets have done ok so far. If you're going to work em hard don't buy em or at least get the warranty and expect to get what you paid for. The tire shop guy in town bought one of those 1" impacts from them and it didn't even last him a week. Some of their stores do have some good buys on name brand tools. A place to check on name brand tools online is mscdirect.com

[Log in to Reply]  [No Email]
Itchy

07-27-2005 16:23:31




Report to Moderator
 Re: Harbor Freight Tools in reply to Illinois Boy, 07-27-2005 06:57:01  
Reasons for buying HB
You dont have to lock your shop.
You save money.
You get to go shopping for tools more often.
They get to know you personally at the store.
You get away from home more often.
You can work on a project longer.
The junk man loves you.
Nobody borrows your tools.
You save money.
You learn to read Chinese, and foreign lauguage



[Log in to Reply]  [No Email]
Ben's A

07-27-2005 14:39:35




Report to Moderator
 Re: Harbor Freight Tools in reply to Illinois Boy, 07-27-2005 06:57:01  
The harbor freight tools are all right if you don't plan to use them hard. I also found that if you buy the "pittsburg" tools that they have a warrenty so I mostly buy those over the others. (espically wrenches, sockets, files ect...) Also prices can sometimes tell you the quality of the tool. If it seems rather cheap that is probably is.



[Log in to Reply]  [No Email]
superwrench

07-27-2005 12:46:13




Report to Moderator
 Re: Harbor Freight Tools in reply to Illinois Boy, 07-27-2005 06:57:01  
I learned a few years ago from one of my automotive instructors that if you can get hurt from using the tool, don't go cheap. Harbor Freight are largely disposable tools for the occasional user. I have seen guys where I work try to use their tools on a daily basis without much success. There are a couple of exceptions though. Their deep impact sockets seem to do ok, and their so called professional line of air tools have been known to edure 6 months of hard use before failing. I don't buy their stuff because none of it is U.S. made. I know that there isn't much left made here but, I have to at least try to buy American first.

[Log in to Reply]  [No Email]
TimV

07-27-2005 12:08:42




Report to Moderator
 Re: Harbor Freight Tools in reply to Illinois Boy, 07-27-2005 06:57:01  
I have a 1/2" HF impact wrench that I bought several years ago. It has held up fine, and though I'm no full-time mechanic I do my fair share of wrenching. As has been noted, these will not make the torque that a $300 impact wrench will make, but if you need this kind of torque on a regular basis you're wise to go to a 3/4" or 1" impact gun right from the start.



[Log in to Reply]  [No Email]
Mike M

07-27-2005 09:20:44




Report to Moderator
 Re: Harbor Freight Tools in reply to Illinois Boy, 07-27-2005 06:57:01  
I have some of those el-cheapo impacts. They have held up fine,they just don't make the power of a high priced one.



[Log in to Reply]  [No Email]
mech187

07-27-2005 09:07:24




Report to Moderator
 Re: Harbor Freight Tools in reply to Illinois Boy, 07-27-2005 06:57:01  
Don"t have any of their air tools, but I have a 6" vise that I bought from them in the mid 80s. The beast weighs 74 lbs if I recall correctly. Has a large flat area about 6" X 6" about 3/4" thick for pounding on things. The screw has almost no play in it. You turn the handle and the jaw moves. Only paid $56 for it with free shipping. Been real happy with it.



[Log in to Reply]  [No Email]
e

07-27-2005 08:45:46




Report to Moderator
 Re: Harbor Freight Tools in reply to Illinois Boy, 07-27-2005 06:57:01  
You'll be fine with it. I've been noticing the quality of their tools has been improving steadily.



[Log in to Reply]  [No Email]
Red Dave

07-27-2005 08:15:31




Report to Moderator
 Re: Harbor Freight Tools in reply to Illinois Boy, 07-27-2005 06:57:01  
I have a few of their air tools. For home/occasional use they are OK.

If you were to use them everyday to earn a living, I would reccomend something better, but for what you say you want, I think they are OK.



[Log in to Reply]  [No Email]
jeffcat

07-27-2005 07:59:26




Report to Moderator
 Re: Harbor Freight Tools in reply to Illinois Boy, 07-27-2005 06:57:01  
Have these tools from harbor. Two small air chissles, 1/2 in air drill and both work great. Use the chissles to clean old bricks. Jeffcat



[Log in to Reply]  [No Email]
Steve (Magnolia, TX)

07-27-2005 07:54:10




Report to Moderator
 Re: Harbor Freight Tools in reply to Illinois Boy, 07-27-2005 06:57:01  
I've got a few pneumatic tools from Harbor Freight (ratchet, die grinder, cut-off tool, etc.), but no impact wrench (my impact is a Campbell-Hausfeld). I've had no problems with my Central Pneumatic (Harbor Freight brand) tools, but...

As others have said, you get what you pay for. As long as you go into it with your eyes open... I think that they're just about right (for me, anyway)...

HTH
Steve

[Log in to Reply]  [No Email]
BobMo

07-27-2005 07:35:47




Report to Moderator
 Re: Harbor Freight Tools in reply to Illinois Boy, 07-27-2005 06:57:01  
You get what you pay for.



[Log in to Reply]  [No Email]
dab

07-27-2005 07:08:19




Report to Moderator
 Re: Harbor Freight Tools in reply to Illinois Boy, 07-27-2005 06:57:01  
Bought quite a bit of stuff from them over the years. Been happy with what I have bought. Got some air tools and they seem to be holding up fine. Would say I use mine pretty much on an every day basis. Just watch for if it says manufactures rebuild.



[Log in to Reply]  [No Email]
Bill in TN

07-27-2005 08:19:32




Report to Moderator
 Re: Harbor Freight Tools in reply to dab, 07-27-2005 07:08:19  
I'm done with Harbor Freight junk. I bought a 6 ton come-a-long, for $20. Stretched 3 rolls of fence and on a Sunday afternoon, pulled the center out of it. Got cleaned up, drove to town, bought a 2 ton american made unit for $50....lets see, $20,+$50,+my time. Yea, I saved money on that deal!

I also bought 2 24" pipe wrenches. I stuck my auger and had to screw it out with the pipe wrenches. Pulled hard, and broke the handle on both. Same story, Sunday afternoon, drive to town and bought american....saved money on that deal as well.

Those cheap tools are fine.....as long as you don't work them hard....problem is, tools are supposed to work hard.

I just don't see how it's cheaper to buy tools twice! I'm done with them....I just buy rags from them and northern tool.....

[Log in to Reply]  [No Email]
S.Jewell

07-27-2005 10:03:26




Report to Moderator
 Re: Harbor Freight Tools in reply to Bill in TN, 07-27-2005 08:19:32  
Their are a lot of Good quality American Made tools on Ebay. That sell pretty cheap, they may be used but will probably outlast any harbor freight stuff... It all depends on how much you plan to use the tools. Once or twice a year to take the lug nuts off your wife�s car yeah fine� but don�t expect too much when you adapt it up to � inch drive and try busting the 1 & 7/8 nut off the stump jumper of a Bush Hog. BTW, if you do, it"s a left-hand thread and you will need a torch, don"t ask me how I know this....

[Log in to Reply]  [No Email]
Illinois Boy

07-27-2005 11:54:47




Report to Moderator
 Re: Harbor Freight Tools in reply to S.Jewell, 07-27-2005 10:03:26  
S Jewell,
This sounds to good to let go - how do you know the threads are left handed and it takes heat to take off the stump jumper?
Sorry... Don't want to rekindle some bad memories but you've got my curiosity up!!!



[Log in to Reply]  [No Email]
S.jewell

07-27-2005 17:26:23




Report to Moderator
 Re: Harbor Freight Tools in reply to Illinois Boy, 07-27-2005 11:54:47  
About two weeks ago I thought I would replace the bottom seal on the old bush hog...so anyway the stump jumper had to be removed to get to the seal. So I fired up the o"le Quincy compressor and grabbed the I/R impact and thought to myself, �No problem knock this nut off, pull the stump jumper, pull the seal and replace�...yeah right, I had 175psi running through a 1/2 inch hose and 1/2 inch couplers and the impact just bounced on the nut. So I got my buddies 3/4 inch impact same thing, NOTHING, got the torch out, heated it red hot, hit it with the impact... Same thing, sat back, sweating from the Kansas sun, swearing and looking at the burn holes in my gloves from the fire I had just put with them from all the dead grass and gear oil, when it hit me like a ton of bricks�Left hand thread. Turn the gun backwards and it spun right off. Getting the stump jumper off was an equally challenging experience that would take another page of text to explain. Moral of the story� gear oil is lots easier to put in than new seals.

Ps: most of the time the nuts are marked with nicks out of the corners of the nut.

Shaun Jewell

[Log in to Reply]  [No Email]
Illinois Boy

07-28-2005 06:53:53




Report to Moderator
 Re: Harbor Freight Tools in reply to S.jewell, 07-27-2005 17:26:23  
S. Jewel,
Are you related to me? I thought that kinda stuff only happened to me?!?! : )



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy