Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

THE BIGGGGGGEST they made!

Welcome Guest, Log in or Register
Author 
jeffcat

07-21-2005 18:40:00




Report to Moderator

This past friday, July 15,05 a year of persistence has payed off! My dad's buddy moved up to NY state about five years ago and last year I stopped in to say hi. Out in his back shed the former owner had left behind the biggest beauty I have ever seen. How about a MALL model# 11. This is a SEVEN horse beast of a saw with a four foot bar and stinger handle. Last year he just wouldn't let it go. When I told him it would go to a good home, He knew I would get it running, BUTTTT. This year I stopped in and just happen to bring an Interstate Optima battery with me. He needed a new one for one of his cars and he also knew how good these batterys are. After a little dickering He swapped me the saw for the Optima! When I got home monday I pulled off the bar and transmission. Both were A-OK. There was still some 30W in the tank! The engine was something else! Praise be that the last person to run it, closed the petcock and ran the saw out of gas!!!! I had to replace the clutch springs and fix the kill switch wire. It also needed a new condensor. The gas tank had just shy of 1/2 gallon of DEAD gas in it. Empty the sludge and pour in straight Laquer thinner. put an old sock in the tank and stir it around with a stick. Tank is now clean as a whistle. Hook everything back up-put some fuel in her, She starts FIRST PULL!!!!! After 10 or 15 years this baby goes. I have over 40 saws now and this is the biggest of all. When she is at full tilt you can scream at the guy standing next to you and all you see is my lips move! WOW is this thing loud and she howls ! If you find something keep after it! Jeffcat.

[Log in to Reply]   [No Email]
kidbob

07-23-2005 08:17:40




Report to Moderator
 Re: THE BIGGGGGGEST they made! in reply to jeffcat, 07-21-2005 18:40:00  
I have model 7 Mall saw with a 36in blade, and also the book for it. I have priced it but no one has bought it. What is it worth?



[Log in to Reply]  [No Email]
jeffcat

07-23-2005 10:51:44




Report to Moderator
 Re: THE BIGGGGGGEST they made! in reply to kidbob, 07-23-2005 08:17:40  
Watch Ebay but it is what you can get. A SUPER clean unit can top$300 plus. Working but dirty with no paint can be half that. I just have fun with them and use them around the neighborhood. This Mall #11 sure is the biggest dam--n thing around my area and the loudest! Sthil made a model#90 and you guess it was a little over 9 HP! No longer made but they show up on Ebay. Sthil and Husky both have saws a little over 8hp.

[Log in to Reply]  [No Email]
Davis In SC

07-22-2005 20:22:36




Report to Moderator
 Re: THE BIGGGGGGEST they made! in reply to jeffcat, 07-21-2005 18:40:00  
Out of curiousity, does anyone know what is the biggest chainsaw being built now ???



[Log in to Reply]  [No Email]
VaTom

07-23-2005 06:09:41




Report to Moderator
 Re: THE BIGGGGGGEST they made! in reply to Davis In SC, 07-22-2005 20:22:36  
Don"t know, but we"re using a Stihl 088, 7.42 cubes and 8.5 bhp for milling lumber. Works great with a 48" bar. Well, works great after we gave up on the factory chain filing and changed the angles to give a more aggressive cut. It"s got some power!



[Log in to Reply]  [No Email]
SWI_Don

07-24-2005 05:42:14




Report to Moderator
 Re: THE BIGGGGGGEST they made! in reply to VaTom, 07-23-2005 06:09:41  
I believe Stihl still makes the 090 but not for sale in the US. I think you can still get them in South America to cut down the monsters they have there.

As far as the in the US I believe it is between the Stihl 880 and the Husky 3120 XP.

If you are interested in old saws here is a good site. He has tried to come up with a list of all of the old saws made. Specs and all.

Have Fun

Don

[Log in to Reply]  [No Email]
Mattlt

07-22-2005 05:39:48




Report to Moderator
 Re: THE BIGGGGGGEST they made! in reply to jeffcat, 07-21-2005 18:40:00  
I second the comments about the kitchen drawer divider pans. That's what I use. One for chisels, one for punches, one for hex wrenches, etc.

Also from the kitchen department, they make these rolls of drawer / shelf liner. Kind of a thin rubber material that keeps things from sliding around. Every once in a while you can find it at the Dollar Store. Just cut it to size.

I've been looking for something better for sockets as well. I currently use the rails with the clips. Would like to have the metal trays, similar to what impact sockets are sometimes packaged in. Haven't had much luck finding them.

[Log in to Reply]  [No Email]
Mattlt

07-22-2005 05:48:56




Report to Moderator
 Re: THE BIGGGGGGEST they made! in reply to Mattlt, 07-22-2005 05:39:48  
Oops! Posted in the wrong thread.



[Log in to Reply]  [No Email]
Farmall 400

07-22-2005 04:01:29




Report to Moderator
 Re: THE BIGGGGGGEST they made! in reply to jeffcat, 07-21-2005 18:40:00  
I have a parts list on my grandpa"s Mall and it has bar and chain up to 144 in. that cost about the same as the power head with no bar. He used 6ft. I also have 2cyl Mercury and a 5ft McCollugh.Along with about 20 other old and odd saws located in we



[Log in to Reply]  [No Email]
Rod (NH)

07-21-2005 20:13:01




Report to Moderator
 Re: THE BIGGGGGGEST they made! in reply to jeffcat, 07-21-2005 18:40:00  
Complete info (and more pics) here.
third party image

[Log in to Reply]  [No Email]
DickTN

07-21-2005 19:35:25




Report to Moderator
 Re: THE BIGGGGGGEST they made! in reply to jeffcat, 07-21-2005 18:40:00  
Your story brings back memories. Used to race home-made go-karts in my misspent youth. Built one w/ a Mall (don't remember the HP) and like to killed myself when the Harley front brake that I used to stop the thing failed, as did the kill button. Later, we built several w/ Mercury engines off, I think, Disston saws. The biggest of those was twelve HP, two cylinder. I recall one that had about a six foot bar, two handles on the motor end and a stinger on the other. A man-killer to use, think we only used it once.

[Log in to Reply]  [No Email]
jeffcat

07-21-2005 19:10:49




Report to Moderator
 Re: Opps-P.S. in reply to jeffcat, 07-21-2005 18:40:00  
Found the file on the Model #7. It is bigger but older. I still am VERY happy with the Eleven!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy