Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

What is MAPP gas?

Welcome Guest, Log in or Register
Author 
Jim.UT

06-24-2005 10:35:13




Report to Moderator

I don't have a torch and I want one. A plumber I know has a portable torch kit with small bottles of acetylene and O2. The bottles are about 2' long and refillable. It looks like just the thing, but the price has held me back.

I told my wife about my desire for a torch. Today she called me from Wally-World and says they have a "high temperature" torch kit that uses "mapp gas". The box doesn't say what "high temperature" means (800F? 1200F?). Anyone ever heard of or use a torch with mapp gas? Is it worth trying or is it just a wannabe torch?

I would be using a torch for heating old nuts and bolts on rusty iron. Also for heating steel when I want to put a bend in a certain spot. Occasionally I would need to cut with it. The small bottle kit my plumber friend has appeals to me because it wouldn't take up a lot of space, could be taken to wherever I need to work and I wouldn't be using it enough to have refill very often anyway.

All opinions welcome. Opinions from people with experience especially valued. Thanks!

[Log in to Reply]   [No Email]
Slowpoke

06-27-2005 01:12:13




Report to Moderator
 Re: What is MAPP gas? in reply to Jim.UT, 06-24-2005 10:35:13  
Go with oxy/acetelene. It's much more versatile. If you are not going to haul the tanks around, get the waist high ones or bigger for oxygen. It costs less per cubic foot to fill a large tank than a small one. If you buy used tanks at garage or yard sales, be sure it has "CUSTOMER OWNED' or "SOLD" stamped in the shoulder or you won't get it filled and you won't own it either.



[Log in to Reply]  [No Email]
Walt in CA

06-25-2005 12:57:49




Report to Moderator
 Re: What is MAPP gas? in reply to Jim.UT, 06-24-2005 10:35:13  
Contrary to some opinions expressed here, MAPP, when used with oxygen, works just fine for cutting and welding. Special torch tips are required and readily available. We use MAPP torches for cutting up foundry scrap because it is cheaper than acetylene when used in volume.



[Log in to Reply]  [No Email]
dr.sportster

06-26-2005 05:56:41




Report to Moderator
 Re: What is MAPP gas? in reply to Walt in CA, 06-25-2005 12:57:49  
Special tips are required? I did not know this.



[Log in to Reply]  [No Email]
Billy NY

06-24-2005 18:49:40




Report to Moderator
 Re: What is MAPP gas? in reply to Jim.UT, 06-24-2005 10:35:13  
I have to agree, it seems there is no real alternative to oxygen/acetylene, it's interesting to read the comments regarding alternate fuels for cutting. I have 2 sets of the 90 cu.ft. capacity ( waist height ) oxy/aceytl. ( I forget the range of tank sizes and how they are measured )

It is handy to have, I use an acetylene set up ( no oxygen, like what plumbers use, for heating rusted assemblies and the like. I forget what you call this arrangement, it will make mild steel glowing hot, but not molten, has a blue flame. I've heard them referred to as "B" tanks, it does last quite awhile, and it sure has helped getting seized parts to free up. I use this set up, so I don't waste my more expensive oxy/acetylene.

[Log in to Reply]  [No Email]
dr.sportster

06-24-2005 12:47:28




Report to Moderator
 Re: What is MAPP gas? in reply to Jim.UT, 06-24-2005 10:35:13  
It is possible to weld with Mapp gas but if you previously used oxy/acet. you will notice the lack of heat.I found it to be good for cutting steel plate.In my own use purchases for home I have only specified acetylene.I rent the full size bottles.Only reason I used Mapp is because thats what they sent to the shop I worked at.Some govt. accountant probably thought it was cheaper.Its not better.



[Log in to Reply]  [No Email]
acmfmh

06-24-2005 11:58:19




Report to Moderator
 Re: What is MAPP gas? in reply to Jim.UT, 06-24-2005 10:35:13  
I have a bottle of MAPP gas that I use for soldering copper pipe. I have used it to heat up a nut or bolt. Does OK for small jobs that I was too lazy to get out the big boys(Oxy/Acet). If you want to cut and weld, don't waste the time. Get a real torch set.



[Log in to Reply]  [No Email]
Rod (NH)

06-24-2005 11:52:17




Report to Moderator
 Re: What is MAPP gas? in reply to Jim.UT, 06-24-2005 10:35:13  
Hi Jim,

MAPP gas is a proprietary mixture from AIRCO industrial gasses. A generic name for it is MPS. It is hotter than propane but not as hot as acetylene. It is safer than acetylene since it has much narrower explosive limits with air. You can see comparative flame temperatures of the common fuel gasses, when combined with oxygen here. An MSDS for MAPP is here.

Note that the temperatures listed in the link above are for a combination of the fuel gas and pure oxygen. Both MAPP and acetylene are also commonly used with just air to supply the necessary oxygen for burning. Flame temperatures for that combination would be significantly lower than with pure oxygen. Air-Acet has been a very common combination for plumbing purposes. It uses a single tank. An Air-MAPP outfit would be similar with a little lower temperature.

Oxy-Acet, Oxy-MAPP and Oxy-Propane are good for cutting steel or for brazing work. Only Oxy-Acet has high enough temperatures for effective gas welding of steel. Either Air-Acet or Air-MAPP (even Air-Propane) is an appropriate choice for most plumbing purposes using soft solders. I use Oxy-Acet for general purpose cutting and heating and Air-Acet for all plumbing soldering applications. The pure oxygen combinations are too hot for soft soldering work.

third party image Rod

[Log in to Reply]  [No Email]
PHV

07-02-2005 17:13:06




Report to Moderator
 Re: What is MAPP gas? in reply to Rod (NH), 06-24-2005 11:52:17  
I also am a welder Rod. I would like to personaly thank you for giving this fellow a proper answer to his proper question. Too much forum space is wasted with opinions as replies when simple answers are asked for. Well done Rod!



[Log in to Reply]  [No Email]
BBx

06-24-2005 11:31:31




Report to Moderator
 Re: What is MAPP gas? in reply to Jim.UT, 06-24-2005 10:35:13  
According to the link below, MAPP with oxygen can reach 5000+ degrees. I have one of the small MAPP gas torches that uses small bottles of MAPP and oxygen, basically the same size as the small propane bottles. Does produce a very hot flame, hot enough to braze, but it goes thru a bottle of oxygen pretty fast.

[Log in to Reply]  [No Email]
buickanddeere

06-24-2005 11:25:16




Report to Moderator
 Re: What is MAPP gas? in reply to Jim.UT, 06-24-2005 10:35:13  
For jobs that take alot of general heating I use a "Benzo-Matic" torch. It's just some super dupper propane burner and valve with a couple of feet of hose and a tank fitting.Just use LP from a 5,10,20lb BBQ bottle and pour the cheap heat on. To keep $$$ down and fuel handy. Go with the previously recomended Victor style torch but use low cost LP for fuel. O2 is cheap. The MAPP or acetylene is what hurt$.

[Log in to Reply]  [No Email]
Coloken

06-24-2005 11:22:05




Report to Moderator
 Re: What is MAPP gas? in reply to Jim.UT, 06-24-2005 10:35:13  
Mapps is the next step up fron propane. Hotter. Will silver solder etc. perfect for refrigeration stuff. No way will it cut or weld. I think I have tried bout everything there is trying to save money. Only thing I recoment is that propane tourch that "swirls" and gets hotter that the standard one that every one has. 30 some dollars. Good in its place. Nothing like Ox/ Act, or for just cutting, Oxy/propane. Others might yell at me, but how good are the Chinese import torches? I think full set on E-bay around 60 dollars. For light use? Bit the bullet and buy Oxygen tank.

[Log in to Reply]  [No Email]
supergrumpy

06-24-2005 10:59:50




Report to Moderator
 Re: What is MAPP gas? in reply to Jim.UT, 06-24-2005 10:35:13  
I used those tall full size tanks and cheepo regulators as a kid, way too heavy and lousy flame control

did without my own set of torches for a long time, tried MAPP (stabilzed acetylene) and even a system that burned pellets to produce oxygen, borrowed a set when I could

finally bit the bullet, got shorty tanks (waist high), a cart, a genuine good set of torches/regulators and had my wife give it to me for xmas

best $450 I ever spent, use them all the time and get the job done right

[Log in to Reply]  [No Email]
bjr23

06-24-2005 10:44:50




Report to Moderator
 Re: What is MAPP gas? in reply to Jim.UT, 06-24-2005 10:35:13  
I have a mapp gas torch and for small silver solder refrigeration tubes 3/8" or so it's fine. But if your going to heat iron or nuts and bolts and occassionally cut some iron your going to need the oxy/acetelene torch you were thinking of, you'll be happy you spent the extra money to get the job done quicker. bjr23



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy