Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Winch Recommendations

Welcome Guest, Log in or Register
Author 
Major

05-19-2005 06:21:51




Report to Moderator

Can we talk/recommend brand names here?




[Log in to Reply]   [No Email]
Keith-OR

05-23-2005 23:04:49




Report to Moderator
 Re: Winch Recommendations in reply to Major, 05-19-2005 06:21:51  
I have a Warn 10000 lb winch that I had mounted on the front of one of my trucks., was restricted to that truck,so I mounted it on a 2 inch stinger and put recievers on front of all my trailers. also on front of trucks. Haven't found anything I cannot load using common sense and snatch block. I
concur, you get what you pay for. I sure would hate to drive 500 or 600 miles and have winch fail when loading equipment or tractor...Keith

[Log in to Reply]  [No Email]
Robert in W. Mi.

05-19-2005 18:46:01




Report to Moderator
 Re: Winch Recommendations in reply to Major, 05-19-2005 06:21:51  
About 12 (?) years ago i put a 12,000 pound Warn on the front of one of my work trucks. I've winched all kinds of things with it from dead tractors to stuck tractors, logs, and about everything else!! It just keeps on working every time i need it!!!

What more could i ask for?

Robert



[Log in to Reply]  [No Email]
RustyFarmall

05-19-2005 12:50:54




Report to Moderator
 Re: Winch Recommendations in reply to Major, 05-19-2005 06:21:51  
Most, if not all of the name brand winches with a rating that you need will use 3/8 inch cable. These are the good ones. You will often find the same name brand, with the same rating at a much lower cost. There is a reason for this, the motors are less horsepower, the gear box is lighter duty, and they use 5/16 inch cable. These cheaper winches may get the job done, or they might just fail right in the middle of loading a tractor. You get what you pay for. The size of the cable is the easiest way to tell the differance.

[Log in to Reply]  [No Email]
Ryan - WI

05-19-2005 07:49:05




Report to Moderator
 Re: Winch Recommendations in reply to Major, 05-19-2005 06:21:51  
I personally have a Superwinch which has served me well, but a lot of guys don"t like them. Whatever bracnd you get, I highly recommend getting a wireless remote. I have one and I absolutely love it. Can load a tractor or vehicle or whatever from the drivers seat. Plus it always made me uncomfortable being that close to a cable under tension.



[Log in to Reply]  [No Email]
Fawteen

05-19-2005 07:30:49




Report to Moderator
 Re: Winch Recommendations in reply to Major, 05-19-2005 06:21:51  
Warn or Ramsey.

What size are you contemplating? What do you intend to do with it? What vehicle are you mounting it on? How are you mounting it?

I have a Ramsey 5000# that mounts to a Reese Hitch reciever. Handier than a pocket on a shirt. I have receivers and pigtails front and back on my 1 ton, and one on the tongue of my big trailer. Winch stays in the garage or the big toolbox on the back of the truck until I need it then I plug it in wherever is most convenient. Wicked handy for pulling dead vehicles up onto the trailer.

Also have a pigtail on my JD 750, and a reciever that pins onto the drawbar. Mounted another receiver onto the boom of my logging arch and use it to lift and haul logs.

Get an awful lot of use out of that one winch.

[Log in to Reply]  [No Email]
Slowpoke

05-21-2005 00:07:03




Report to Moderator
 Re: Winch Recommendations in reply to Fawteen, 05-19-2005 07:30:49  
Is a pigtail a 'C' hook or retrieval hook like ones found on Jeeps? How are they useful? For doubling the line pull with blocks?



[Log in to Reply]  [No Email]
Major

05-19-2005 08:59:55




Report to Moderator
 Re: Winch Recommendations in reply to Fawteen, 05-19-2005 07:30:49  
Just wanted some general brand name recommendations, and got about what I would have guessed.

Planning on a 10g or so pull to have a safety margin, mostly tractors in the 5 to 8 G range depending on fluids and weight, and or an implement possibly attached.

Usually a running tractor and no need of a winch on the trailer, but just bought a parts tractor, and that may happen now and then.

Been reading all I can, rolling, resistance, etc.

Had been looking at Milemarker, but was not happy with the response I got from the factory on distributer, and/or from the distributors on availability.

Do like the idea of their new hydraulic line though.

And they had been recommended by some of the truck shows on cable.

Thanks for the responses.

[Log in to Reply]  [No Email]
Coldiron

05-21-2005 07:19:15




Report to Moderator
 Re: Winch Recommendations in reply to Major, 05-19-2005 08:59:55  
Major, I have a 8K MileMarker on my 10K Lb tilt flatbed trailer. Ran a 8ga lead from the front of my truck with a quick connect on the back of the truck for hook up to the winch when needed. The winch does a good job and is simple in construction. I have an 8K Ramsey worm drive on the front of the truck that is a great winch that is about 25 years old. I have drug several dead loads on the trailer without any problem and rolling weight is absolutely not a problem for the MM. Cheaper winch, but for the job it is alright.

[Log in to Reply]  [No Email]
T_Bone

05-19-2005 11:53:50




Report to Moderator
 Re: Winch Recommendations in reply to Major, 05-19-2005 08:59:55  
Hi Major,

Take a look at the website below as it'll explain alot about winching and the use of snatch blocks.

It might help you choose the right equipment for your task.


T_Bone



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy