Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Thorsen Wrenches

Welcome Guest, Log in or Register
Author 
R. U. S. T.

05-12-2005 18:19:56




Report to Moderator

Looking for anybody with an opinion of the new Thorsen wrenches. I just purchased a set of 6 combination Thorsen wrenches from 1-3/8" to 2" for relatively cheap. It wasn't until I read the packing slip that I found out that Olympia is Thorsen. I was a bit disappointed to find this out. I should have come here first and looked through old posts. Oh well.

My impression of them with my one and only use to date is I at least got what I paid for. They seem like pretty good Taiwan made tools but not what I was hoping for when I saw the name Thorsen. There seemed to be a fair amount of play in the open end of the 1-1/2" wrench. Just curious as to others experiences with new Thorsen tools.

Thanks

[Log in to Reply]   [No Email]
Mark - IN.

05-13-2005 20:50:42




Report to Moderator
 Re: Thorsen Wrenches in reply to R. U. S. T., 05-12-2005 18:19:56  
Well, back in th '70's worked in an auto parts chain, Fleener Auto Parts before got absorbed by ???, and they sold TAT (Thorsen Allied Tools), and they had a lifetime guarantee. I don't recall if needed the reciept or not to turn them in, but did have that guarantee just the same for what it's worth.

I remember a guy breaking the box out on a 1 3/4" and bringing it in and I exchanged it. Then as a joke, super-glued the pieces back together and set it off to the side. Afterwards, I was at the counter doing something and the boss came up and told me to go do something else. Playing mad, I picked up the wrench and whacked the counter a good one, sending the peices flying. The boss looked at me and said something like "Ok, I'll get someone else to do..." and walked away. The downside was that a customer saw me "appear" to shatter the wrench and said he'd never buy such junk in front of the boss. When the boss found out the truth, I got my butt chewed pretty good. LOL.

Mark

[Log in to Reply]  [No Email]
Mark - IN.

05-13-2005 20:57:10




Report to Moderator
 Oh, by the way in reply to Mark - IN., 05-13-2005 20:50:42  
I still have the same two complete sets that I bought back then, no problem. One of the 9/16 is pretty burned and discolored, but that's because I needed an offset for something back then, and the wrench still works today. Take care of them, will do ok.

Had socket sets too, but long since gone. They were junk (thin walls) and did breakout on me decades ago.

Mark



[Log in to Reply]  [No Email]
Boog

05-13-2005 05:01:29




Report to Moderator
 Re: Thorsen Wrenches in reply to R. U. S. T., 05-12-2005 18:19:56  
I bought a set of Thorsen open end wrenches in 1984. I still have them and they still work well. However, the chrome coating is peeling off a few of them. But the underlying steel still has not begun to rust. I don't know when Olympia acquired Thorsen, but mine have been worth the money, if I overlook the aesthetic flaking chrome.



[Log in to Reply]  [No Email]
Farmered

05-13-2005 23:56:30




Report to Moderator
 Re: Thorsen Wrenches in reply to Boog, 05-13-2005 05:01:29  
Be careful with that peeling chrome, it is sharper than a new razor and can inflict a painful cut. Ed



[Log in to Reply]  [No Email]
R. U. S. T.

05-13-2005 18:43:12




Report to Moderator
 Re: Thorsen Wrenches in reply to Boog, 05-13-2005 05:01:29  
It's a good chance that Thorsen actually made your wrenches in the U.S.A. I've been doing a little digging and it seems Thorsen moved their manufacturing in 1988, reducing what they made and importing more tools.

Actually mine have already paid for themselves after one use. I'll only use them occassionally so spending more on really good wrenches wasn't what my pocket book warranted. Still can't help being a bit disappointed.

[Log in to Reply]  [No Email]
rockyhawaii

05-12-2005 19:45:44




Report to Moderator
 Re: Thorsen Wrenches in reply to R. U. S. T., 05-12-2005 18:19:56  
I have a few. No worse than anything else.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy