Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Tire Changing Tools

Welcome Guest, Log in or Register
Author 
jackal5

03-27-2005 12:18:34




Report to Moderator

Who sells tools (hand or hydraulic) suitable to change large tires? up to 20.8x38 or so?




[Log in to Reply]   [No Email]
BLK

03-27-2005 16:23:49




Report to Moderator
 Re: Tire Changing Tools in reply to jackal5, 03-27-2005 12:18:34  
Gemplers Hardware They Have It All



[Log in to Reply]  [No Email]
thejdman01

03-27-2005 14:00:28




Report to Moderator
 Re: Tire Changing Tools in reply to jackal5, 03-27-2005 12:18:34  
i have done it w/a hammer and pry bar or hammer and screw driver on smaller ones. i guess i dont know what you want for tools. spoons? slide hammer? are you changing mostly smaller or bigger i know you said upto that size. i personally would change semi tires all day long to little lawnmower tires. real little tires are a pain to me. usually at least around here you can find shops going out of business and find cheap tools. alot of guys up at your tires pluse walley world etc wouldnt know what a tire iron was if you told him it was a tire iron. there used to a tire machine and tire irons are a way of the past unless you go to a stricly tire shop that deals in bigger tires.

[Log in to Reply]  [No Email]
Bill WI

03-28-2005 06:55:04




Report to Moderator
 Re: Tire Changing Tools in reply to thejdman01, 03-27-2005 14:00:28  
I've changed up to 12 x 38 and always felt it was easier to change right on the tractor. It seems upright is easier to work if it's solid. Solution and fenders make for a little more cussing if you don't have good equipment.



[Log in to Reply]  [No Email]
old

03-27-2005 13:41:36




Report to Moderator
 Re: Tire Changing Tools in reply to jackal5, 03-27-2005 12:18:34  
Most auto parts places have them or can get them, also farm and home stores should have them. What you will need is a tire hammer for brakeing them down and then 2 tire spoons which are about 3 foot long. You also need soapy water and a lot of arm muscle. I've done the tire thing for a liveing at one time and now do most of my own tire changeing even the split rims but if you don't know how to do split rims I would stay away from them they can take your head off

[Log in to Reply]  [No Email]
For whure..John,PA

03-27-2005 16:26:13




Report to Moderator
 Re: Tire Changing Tools in reply to old, 03-27-2005 13:41:36  
Old..a couple years ago I was spending some time in Bedfore, PA. While there the rescue trucks went whizzing by me on their way to a local garage. You are right, the tire-changer's head was up against the roof! Later the garage was sold.



[Log in to Reply]  [No Email]
old

03-27-2005 16:34:29




Report to Moderator
 Re: Tire Changing Tools in reply to For whure..John,PA, 03-27-2005 16:26:13  
I do split rims off and on but I also know the safe ways to do so, I would never tell a novice how to do it because of it not being safe to do unless you know what your doing and even then theres no room for a mistake



[Log in to Reply]  [No Email]
RJ-AZ

03-27-2005 20:33:37




Report to Moderator
 Re: Tire Changing Tools in reply to old, 03-27-2005 16:34:29  
We still have a lot of trucks and Equipment in our fleet thathave split rims. Mostly graders, loaders and 11.00 x 20 truck tire. As far as I know these are not OUTLAWED. You have to watch a safety video and then be signed off on them before being alowed to work on a split rim. This is what makes the difference between a trained professional and a wannabee. Same applys to truck air brake chamber daiphram replacements. Another thing that will ruin your day if not done properly.

[Log in to Reply]  [No Email]
Can't even use my name

03-27-2005 20:00:12




Report to Moderator
 Re: Tire Changing Tools in reply to old, 03-27-2005 16:34:29  
I thought they outlawed those babys. I know most shops here will make you buy a different rim if you have them.



[Log in to Reply]  [No Email]
old

03-27-2005 20:06:06




Report to Moderator
 Re: Tire Changing Tools in reply to Can't even use my name, 03-27-2005 20:00:12  
Thats a yes an no thing. They don't put them on any more but theres a lot of things out there that still use them. I just changed a tire on my Galion 303 grader and its a split rim, I don't think it would be easy to find the other type of rim for it. I also have a 1965 ford 1 ton with them on it. As far as I know they are only outlawed for new not older things.



[Log in to Reply]  [No Email]
Can't even use my name

03-27-2005 20:10:10




Report to Moderator
 Re: Tire Changing Tools in reply to old, 03-27-2005 20:06:06  
Now what exactly is a split rim. We have an older White that has those rims with the ring on one side that makes the front lip of the rim, those aren't split rims are they?



[Log in to Reply]  [No Email]
Doug in IL

03-28-2005 04:59:32




Report to Moderator
 Re: Tire Changing Tools in reply to Can't even use my name, 03-27-2005 20:10:10  
A split rim is exactly that. The rim splits in half in the middle of the rim. Those are the most dangerous ones.The biggest problem with the true split rims is that it is more difficult to tell if they are assembled correctly or not. The other type uses a locking ring on the outside edge of the rim. On thse you can see if the ring is installed correctly before you inflate them. All the tire outfits around here will change the locking ring type. I have changed plenty of those at home. The rim and the ring both need to be in very good condition and you should use a tire cage when inflating them for the first time.

[Log in to Reply]  [No Email]
Can't even use my name

03-28-2005 20:35:43




Report to Moderator
 Re: Tire Changing Tools in reply to Doug in IL, 03-28-2005 04:59:32  
I didn't think the ones with the ring were split rims. I change them all the time myself, just use the skidsteer bucket as a guard to keep it down in case it comes loose. And they still change those at the tire shops but we did have one they wouldn't change a few years ago. They said it was against the law to change it 'cause it was a split rim, I didn't see it so I am not sure what it looked like.

[Log in to Reply]  [No Email]
old

03-27-2005 20:35:47




Report to Moderator
 Re: Tire Changing Tools in reply to Can't even use my name, 03-27-2005 20:10:10  
A split rim is any rim that has a ring etc that will come off the rim that holds the tire on on one side or the other. I.E. Rims that are 2,3,or4 piece. The term split is sayings you have to split/remove a part of the rim to get the tire off and almost all of them use tubes.



[Log in to Reply]  [No Email]
Gerald J.

03-27-2005 13:17:17




Report to Moderator
 Re: Tire Changing Tools in reply to jackal5, 03-27-2005 12:18:34  
Gempler's and value built sell a mechanical bead breaker. You need BIG tools for tractor rears. And lots of muscle and from what I've watched, you need surplus skin to contribute to the job.

I've had a few smaller rears changed, and I conclude its worth the price of admission to WATCH it done. When the tire outweighs you, you don't toss it about like a garden tractor tire.

Gerald J.



[Log in to Reply]  [No Email]
Can't even use my name

03-27-2005 20:07:42




Report to Moderator
 Re: Tire Changing Tools in reply to Gerald J., 03-27-2005 13:17:17  
Ahhh it ain't so bad. I changed 6 sets of 18.4-38's and one set of 20.8-38's in the last 3 years by myself. Once stood up tires don't weigh so much. The worst part is getting the back bead over the rim but I got a trick to it now. Once you have your spoon in there put a chain around it and around something solid (pole or whatever is tall enough) and let the tire lean away from it essentially doing the work for you. Then get your tire mounting compound mixed with water as per directions and your BFH. Put mixture on bead and rim and swing hard at the bead where it is contacting the rim and continue as it starts to come over. Watch out cause sometimes those rims will just pop right out and get your toes. Really isn't that bad. Remount is the easiest.

[Log in to Reply]  [No Email]
acmfmh

03-27-2005 12:41:12




Report to Moderator
 Re: Tire Changing Tools in reply to jackal5, 03-27-2005 12:18:34  
Harbor Freight, Cummings, etc. sell automotive tire changers. They are hand operated. If you can lay the tire down you can use the bead breaker on these changers. Then tire spoons to remove the tire. All of this is hand tools. I have had luck using the removal tool from the changer getting the tires from the rim also. Used a piece of pipe to have a post for leverage.



[Log in to Reply]  [No Email]
CRUSADER

03-27-2005 12:25:31




Report to Moderator
 Re: Tire Changing Tools in reply to jackal5, 03-27-2005 12:18:34  
You can get hand tools to work with tires for installation and removal at your nearest Tractor Supply Store or Gebo's. Not sure where you would get the hyd or air operated ones. Another good source for this type of equipment would be your local NAPA Auto Parts Store. They usually have a good supply and source for shop tools, specialty tools and equipment.

later days mate,
Jim



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy