Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Well, there's . . .

[Show Entire Topic]  

Welcome Guest, Log in or Register
Author 
John Garner

03-16-2005 19:05:55




Report to Moderator

Eddie --

If you can find a supplier near you -- which will usually be a "mill supply house" or Industrial Distributor selling mainly to commercial machine shops -- the Swiss-made P B Baumann screwdrivers are about the finest in the world.

A step down are some of the other European lines -- Wera and Wiha from Germany, Bost and Facom (some of the Facom screwdrivers are sold in the US under the name of Facom's US subsidiary, SK) from France come to mind immediately.

For US-made screwdrivers, I prefer Klein and Proto, although I own and use mostly Stanley and Craftsman. At one time or another, Pratt-Read has made screwdrivers for just about every name-brand "maker", and only recently has begun marketing screwdrivers under their own label. Pratt-Read's top-of-the-line screwdrivers are top notch, and I've heard good reports on a line of European-style screwdrivers they are importing from Slovakia.

At the lower-price end of the market, the Canadian-made Fuller drivers are pretty good, and there are some damn fine screwdrivers being imported from Japan and Taiwan.

(Go ahead, get the "Taiwan" laugh out of your system.)

I also laughed a few years back when one of the local auto parts stores gave me a 5-piece set of Allied-brand screwdrivers that were Taiwanese almost-clones of the Snap-On drivers -- the set was free with a $ 25 purchase. After several years of opening paint cans and other scutt work, the 1/4 x 4 inch flat-blade driver still didn't show any sign of wear and it was handy when I needed to clean out some rust-plugged screw slots. And it was still handy when I wanted to hammer-shock the screws before trying to extract them.

After several good hammer whacks, the el-cheapo driver still looked good and was still handy so I decided to be lazy and try to loosen the screws with it . . . expecially since it had that nice hex bolster to take a wrench.

As it turned out, that screwdriver wasn't bad at all, and neither were its package-mates. In all honesty, I'm not sure that genuine Snap-On drivers (I own a couple) would have performed any better.

John

[Log in to Reply]   [No Email]
[Show Entire Topic]     [Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy