Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Weld cast iron to steel???

Welcome Guest, Log in or Register
Author 
Trucks

03-06-2005 16:35:55




Report to Moderator

Hey guys, I have an old 351W oil pan from a 1979 Ford van.It has a cast piece in the side of the oil pan, that the oil stick screws in.Any way I don't know whether it is cast steel or cast iron. I need to move it to the opposite side, and right now it is just riveted in place, and it is leaking.I know I can weld up the hole in that side, and I know I can move it to the other side, but what I don't know is if I can weld this sucker around the edges to keep it from leaking.I am not big on RTV in the oil pan as it might turn loose and end up in the pickup screen?I have a TIG welder, and I know it is great for some odd jobs like this sort of stuff, but I would like to know what filler rods to use if this is even possible?Thanks in advance for any help!!

[Log in to Reply]   [No Email]
TomTX

03-07-2005 06:16:48




Report to Moderator
 Re: Weld cast iron to steel??? in reply to Trucks, 03-06-2005 16:35:55  
Nickle rod in stick welder. 3/32nd size.



[Log in to Reply]  [No Email]
Bob

03-06-2005 21:40:14




Report to Moderator
 Re: Weld cast iron to steel??? in reply to Trucks, 03-06-2005 16:35:55  
I wouldn't be surprised if the dipstick adapter, in addition to being riveted in it's present location is not also soldered or possibly brazed. If I remember correctly, many of the Fords were, at least the older ones.

If it IS soldered, that would limit your options to attach it in it's new location, because unless you can grind off any and all solder residue (if any) down to bare metal, it will be impossible to braze or weld into it's new location. When you remove it, you should be able to tell for sure.

Is there no other option, such as finding a different oil pan, or installing the alternate dipstick down through the front timing cover?

[Log in to Reply]  [No Email]
Davis In SC

03-06-2005 20:25:02




Report to Moderator
 Re: Weld cast iron to steel??? in reply to Trucks, 03-06-2005 16:35:55  
Silver solder would probably work..... ..



[Log in to Reply]  [No Email]
T_Bone

03-07-2005 07:13:50




Report to Moderator
 Re: Weld cast iron to steel??? in reply to Davis In SC, 03-06-2005 20:25:02  
Hi Truck,

I agree with Davis as I think silver solder would be a good choice.

What I would do is take the piece off then clean with a torch (burn off the oils) then clean with power wire brush to white metal then try to pre-tin the surface to be attached.

If the part tins easy and well then clean the pan the same way, then rivet in place then solder for seal. I say solder but it's inbetween a solder joint and a brazed joint as 15% silver solder melts at 1800� for a good "strong" weld/seal.

The rivets is to keep the pan metal from warping away from the block until the joint cools. Welding rod with the flux removed makes good rivets. Keep most of the flame on the heavier piece of base metal.

You could also Tig the seal joint using 15% Ag as the filler. If the parts cast steel the 308 or 309 SS filler rod will work well. However if cast iron then 308/309 will be a poor choice vs 15%Ag.

Metal cleaness is a must no matter what method of welding. You can also use a AL or CU chill bar on the outside that will help with pan warpage and sugar.

T_Bone

[Log in to Reply]  [No Email]
Trucks

03-07-2005 16:22:43




Report to Moderator
 Re: Weld cast iron to steel??? in reply to T_Bone, 03-07-2005 07:13:50  
Hey T-Bone, I haven't took it apart yet, but I think it is only riveted to the pan because it has a cork gasket between the pan and the cast piece.Any way I was hoping to try out my new TIG welder on it. You said I needed a Ag filler rod what is that? and is there any real good way to tell if it is cast iron or cast steel without breaking the piece?I would like to move it if at all possible , but the engine also has a dipstick in the timing cover.Although it is NOT convenient at all for this application.Any help would be appreciated.Thanks again for your help.

[Log in to Reply]  [No Email]
T_Bone

03-08-2005 06:39:17




Report to Moderator
 Re: Weld cast iron to steel??? in reply to Trucks, 03-07-2005 16:22:43  
Hi trucks,

Ag= silver, Au=gold, Fe= iron, etc. keeps typing down as I'm a poor typest.

I should have added you can also use any steel wire for the seal weld too. Just remove all scale from the welding joint and filler rod or you will get porosity with-in the weld.

Castiron has dark yellow sparks when ground.
Caststeel has light yellow sparks when ground.

If you have a old scrape piece of castiron laying around use it for a spark test so you can see the difference in spark colors.

T_Bone

[Log in to Reply]  [No Email]
James Herrman

03-06-2005 19:01:12




Report to Moderator
 Re: Weld cast iron to steel??? in reply to Trucks, 03-06-2005 16:35:55  
Would also agree with brazing. One way to tell the difference between cast iron and cast steel is cast iron will break before it bends and cast steel will bend before it breaks. Another way is to take a sharp chisel and try to "shave" off an area. Cast steel will shave off a piece, similar to mild steel, and cast iron will will chip away in small chunks.
You can weld cast steel with 7018 rod, but if I were you, brazing would be my choice. My experience only. JIM

[Log in to Reply]  [No Email]
Coloken

03-06-2005 16:49:59




Report to Moderator
 Re: Weld cast iron to steel??? in reply to Trucks, 03-06-2005 16:35:55  
This is what brazing was invented for.
If you do not have an o/a torch, get a carbon arc torch for your arc welder.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy