Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Techumsah engines and snowblowers

Welcome Guest, Log in or Register
Author 
thejdman01

01-27-2005 13:19:25




Report to Moderator

just curious been seeing snow blowers onsale alreaday and spring clothes ont their way out even though still very cold but anyways i find on most snowblowers they run techumsah engines . i know there are exceptions such as honda toro etc. but generally northern catalog, mtd's ariens etc all use those motors. why? i just find it wierd they all use those vs briggs or kohler. i was wondeirng if techumsah are known for running longer starting easier or whta the deal is. i have only ever owned 1 of those motors wasnt great wasnt terrible. didnt know much about it (previous maintenance) didnt impress me didnt disappoint me. i noticed aroudn here briggs has probably the biggest service parts network. but most of them arent worth fixing but thats another topic jsut wondered if anyone had any insite to why techumsah are used dont seem to be that much cheaper either

[Log in to Reply]   [No Email]
deanop

01-28-2005 19:03:53




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to thejdman01, 01-27-2005 13:19:25  
don't know about new tecumseh's, but the old ones i thought are good..the carbs on tecs seem to give more problems, as far as the snowblower engines, that i've worked on...



[Log in to Reply]  [No Email]
Chester

01-28-2005 17:19:36




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to thejdman01, 01-27-2005 13:19:25  
Here's my trouble free Tecumseh powered blower that I used up until a few years ago. Only had to femove the head to unstick the exhaust valve, in all the time I owned it. Now have a 5HP MTD with a Tecumseh..... .....and again trouble free.



[Log in to Reply]  [No Email]
JT

01-28-2005 12:53:37




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to thejdman01, 01-27-2005 13:19:25  
jdman,
The biggest reason you see Tecumseh engines on snow equipment is they are the only ones currently making sno application engines, beside Honda. Briggs is getting back into the snow engine market, but they tried it a few years back and their engines did not like the cold, so thye got out of it again. Contrairy to what may be said on this engine, it is a heck of a little engine. I sell Toro snow blowers, all use either Tecumseh engines or R-Tec engines(Toro's own) They have always run good, started good, benn very dependable. Most people had a problem with Tecumseh engines because of lack of knowledge to work on them when they had probelms. Without some experience, they USED to be a bear to work on, as easy as any of the rest now, so if you need a blower, by all means get the Tecumseh engine, you will not be dissapointed, unless you do not take care of.
Jim

[Log in to Reply]  [No Email]
farmweld

01-28-2005 09:34:08




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to thejdman01, 01-27-2005 13:19:25  
i owned a techumseh one time. lasted for about 4 months. they just dont hold up. it was on a small generator that didnt run but maybe once a month



[Log in to Reply]  [No Email]
Red Dave

01-28-2005 08:43:14




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to thejdman01, 01-27-2005 13:19:25  
I have an Ariens with a 7 horse Techumseh. It's a about 12 years old and hasn't missed a start yet. Runs good, starts easy, I have no complaints whatsoever about that engine.
I had a cheap lawn mower with a Techumseh vertical shaft of about 3 or 3 1/2 horse. Ran it for 15 years, changed the plug once and the oil maybe 2 or 3 times. Always started on the second or 3rd pull. The mower deck rusted to the point it wouldn't support the weight of the engine anymore, but the engine was still running fine.
Tore it apart to teach my son about how an engine works and the bore still looked just fine.
Yes, the Tecumseh's may be cheap, but my experience with them has been good.

[Log in to Reply]  [No Email]
Bill from MA

01-28-2005 13:39:14




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to Red Dave, 01-28-2005 08:43:14  
I also had, if you can believe it a Kmart mower with a Tec that went maybe 12 years until I hit some massive rock and killed it. But I was using
it like a push bush-hog !

Did a few oil & plug changes over the years and it
always started on the first pull when cold. Warm
restarts were another thing.

Bill



[Log in to Reply]  [No Email]
Scott Green

01-28-2005 09:20:58




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to Red Dave, 01-28-2005 08:43:14  
yes Dave , I have heard people swear by the techumsah engine. My statements are from way back when I was a kid , useing "junk" engines (parts) to make good ones. Lots of junk briggs engines (parts) also. Better luck with the briggs , when it comes to putting used parts together. My main question is: Are they now preasure lubed systems? I don't remember the techumsah being preasure lubed. Of course , I don't remember anything about the techumsah engines any more. Just remember I didn't like them.

[Log in to Reply]  [No Email]
Red Dave

01-28-2005 10:03:09




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to Scott Green, 01-28-2005 09:20:58  
The small, vertical shaft engine I tore apart wasn't pressure lubed. I don't think that the 7 horse on the blower is either.

I have a 23 horse, 2 cylinder Briggs on a generator that has an oil filter and a low oil pressure shut-down. That's the smallest engine with an oil pump I currently have. That includes Kohlers, Briggs & Tecumseh's.
Look for a low oil pressure shutdown feature, if it has that it would have to have pressurized lube, wouldn't it?

[Log in to Reply]  [No Email]
charley 02

01-28-2005 15:55:49




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to Red Dave, 01-28-2005 10:03:09  
i work at a ariens dealer and my opinion is that tecumseh"s are junk i have seen numerous engines with little or no hrs on them have to be sent back because they were totaly trashed if you want a bullet proof engine spend the extra and buy a honda you will never find a better starting/running engine



[Log in to Reply]  [No Email]
dixie

01-28-2005 17:55:58




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to charley 02, 01-28-2005 15:55:49  
Tecumseh engines have served me well for over 30 years or so. They always had more torque than B&S engines of similar size. Like all machines, the service they get, affects the service they give. Craftsman mowers have used them since heaven knows when with good results. I have a Miller welder from the 70"s with an ovh 14 h.p. Tec that still runs like a champ! Buy a Honda? Thats like buying a Goldwing or a Camry instead of a Harley or a Jeep CJ. Where"s the excitement in that?

[Log in to Reply]  [No Email]
Scott Green

01-28-2005 05:51:46




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to thejdman01, 01-27-2005 13:19:25  
I'd like to add another little spin off question to this techumsah engine talk. I've worked on , tore apart , and fixed many small engines when I was a kid , mowing lawns for pocket money. Because I had no money , I would take engines apart , and use parts from different engines to make one good one. Between Briggs and techumsah , I always considered the techumsah a throw away pc of junk , compared to the briggs. That was over 30 years ago. Over the years , other back yard machanics have made the same comment to me. About a week or so ago , my neighbor was telling me that the techumsah engines were good engines. And they had full preasure lube. I don't remember any of them junk techumsah engines having full preasure lube. The only thing I remember is that I didn't care for them. Hear is my question: Did they have full preasure lube years ago? And , do they have full preasure lube in the more modurn ones? If so , when was this added? Thanks , Scott

[Log in to Reply]  [No Email]
JT

01-28-2005 12:58:55




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to Scott Green, 01-28-2005 05:51:46  
Yes, the little piston thing on the crank shaft and hooked into the sump was an oil pump, was not full pressureized, though just oil to the crank



[Log in to Reply]  [No Email]
Vern-MI

01-28-2005 10:00:58




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to Scott Green, 01-28-2005 05:51:46  
I had a 10 C.I. Tec on a toro lawnmower and it had a piston oil pump which ran off the camshaft. I finally got rid of the mower after twenty-two years when I purchased another Toro which has a Suzuki engine on it. Tec never failed to start and was still running when I got rid of it. Dad bought a Toro with a Briggs and after four years it was so messed up that he traded it on a Toro with a two cycle engine.

[Log in to Reply]  [No Email]
Vern-MI

01-28-2005 05:51:41




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to thejdman01, 01-27-2005 13:19:25  
I have a Tec on a two stage blower and it runs fine except for one continual problem. The throttle shaft keeps seizing in the carb housing from moisture in the air and disimilar metals in the shaft and carb body. Almost evertime I use it I have to work the throttle back and forth in the body and squirt some PB Blaster on it to free it up. The throttle is governed so it will stay siezed unless manually worked free prior to running the machine. Otherwise the motor runs great.

[Log in to Reply]  [No Email]
mmguy

01-28-2005 05:28:45




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to thejdman01, 01-27-2005 13:19:25  
I grew up on afarm in SD.Dad was a self taught mechanic and a pretty darn good one. He claimed use B&S for hot weather applications (lawn mowers etc) Tech for cold & Onan for all seasons. We did have one B&S on a Snapper mower the would not hold together. It was 11hp vertical I bought a new 6/26 snow blower in '86 with Tech and it has never let me down.



[Log in to Reply]  [No Email]
No reserved name

01-28-2005 05:08:46




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to thejdman01, 01-27-2005 13:19:25  
They will run good for awhile but, go buy some starting fuild,it will save your arm later.
I seen the same blowers but walked away.



[Log in to Reply]  [No Email]
tompepper

01-28-2005 04:22:31




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to thejdman01, 01-27-2005 13:19:25  
yeah them tech is good engines,thats why i have a bolens tractor setting here with a hh100 tech.ign is out of it and parts a nla.and can't find a good one anywhere.gonna put a wisconsin on it.as for briggs.i've pulled them out of sheds and barns that have set for 10 + years.clean the coil and flywheek and a new plug,fresh gas and they start and run.no bs,give me a b&s anytime



[Log in to Reply]  [No Email]
Irv

01-27-2005 23:49:50




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to thejdman01, 01-27-2005 13:19:25  
I have a John Deere snowblower with a 10 hp Tec engine and it has worked great. I spent some time in a bar years ago with a B&S engineer. Turns out they make a different engine for different markets. Snowblower engines are seldom used more than a few hours per year. Usually the sheet metal on them rusts out before the engine goes. Or somebody gets a rock in there and destroys the impeller or drivetrain in some fashion. So snowblower engines are designed for the lowest mean time before failure. In other words, cheap. Irv

[Log in to Reply]  [No Email]
jdemaris

01-28-2005 05:49:46




Report to Moderator
 Re: Tecumseh engines and snowblowers in reply to Irv, 01-27-2005 23:49:50  
I also met with some Briggs & Stratton engineers, back in the late 60s - and was told that their Amercian market was totally different than overseas. The point was that Europeans et. al would not buy "throw away" engines like Amercans did, and still do. So, engines for any other market were built to be much more durable.
During the early 70s, when companies such as Honda entered the US market with small engines, it really shook things up - because the engines were durable and rebuildable. That's when Briggs started offering "spcial" engines with better valves, cylinder liners, better air cleaners, etc.
Funny thing is, before the 60s, most of the US small engines were built pretty well -many were cast iron, or a least came standard with cylinder liners - that includes Briggs, Tecumseh/Power Products, Clinton, etc.

[Log in to Reply]  [No Email]
big jt

01-27-2005 23:43:33




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to thejdman01, 01-27-2005 13:19:25  
I never worked with a Tech powered Snow blower. But have worked with two B&S and one Kohler powered units.

One each of the Flojet and Pulsajet briggs. Neither started in the winter worth a darn. Had to have them in a warm building. Both had a 110 volt starter. Rare option especially on a 5 horse. 5 horse briggs used to need to be a special block to even hold a starter.

The Kohler powered blower is a old unit really more of a collectable but I used it. That thing will start with 1 to 2 pulls real regular even down to near 0 degrees.

All three engines had hot boxes etc and were set up as snow blower engines. Most parts books have special equipment listed for Snow blower application.

It is just a guess but I always thought Briggs couldn't make the snow package really work and figured it was a small portion of the market. Rather than develop a engine that worked well they just let Techsumah have that market.

I have never been a real fan of Tech but do have a Toro push mower that all I have to do is pour in gas and pull the cord usually once.

JM2CW

jt

[Log in to Reply]  [No Email]
jdemaris

01-27-2005 20:01:44




Report to Moderator
 Re: Tecumseh engines and snowblowers in reply to thejdman01, 01-27-2005 13:19:25  
As a full size tractor mechanic since the 60s, I was kind of forced to work on the small stuff too, since we sold it. That being said, you cannot fairly say one engine is better than the other. Briggs made some real bad ones, so did Tecumseh, Clinton, and Koehler. They all made a lot of good ones too. For years, Tecumseh had the cheapest price on snow-rated engines and I suspect why they were used so much. The snow engines have heat boxes, no air cleaners to get wet, primers on top of chokes, and an AC electric start option that I don't think Briggs ever offered. Briggs offered 12 volt starters, but who wants to keep a battery in a snow blower that gets used so rarely? Anyway, Tecumseh had some real bad quality control problems in the middle 70s and almost went bankrupt. But, they got better, got new management, and got better. The H frame engines were pretty good, the HM frame not as good, etc. Usually, any Tecumseh that's 5-7 horsepower (without overhead valves) is an H medium frame. And, some come with cast iron blocks, some with aluminum blocks that have a steel sleeve, and some are aluminum with no sleeve - just a soft aluminum bore. They could also be ordered with ball bearings on the crank instead of bushings. And, Briggs was pretty much the same way except - for quite a while Briggs ONLY came with the soft aluminum bores. Just like the Chevy Vegas - remember them? They started losing business to Honda and such, and came out with their IC series that offered the same HD options as Tecumseh. I didn't mention Koehler or Onan since I've never seen them on snowblowers - they're probably too expensive. Koehler did once made a very bad vertical engine in an effort to compete with Briggs and Tecumseh - but it failed miserably - went over like a fart in church. Anyway, I've got some stuff here with Tecumsehs that are 30-40 years old and still run fine - inlcuding a snowblower, an Ariens Rocket rototiller and a Troybuilt rototiller.

[Log in to Reply]  [No Email]
Kevin2

01-27-2005 18:50:11




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to thejdman01, 01-27-2005 13:19:25  
Another underlying reason is that Briggs is buying up some manufacturers, making them a direct competitor to Ariens and others. They are buying Murray out of bankruptcy court as we speak.



[Log in to Reply]  [No Email]
leland

01-27-2005 18:07:12




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to thejdman01, 01-27-2005 13:19:25  
I had a 8hp tec on a troybilt and it was the best engine I ever owned always started on 1st pull even after sitting for months . In my book there better than a briggs.



[Log in to Reply]  [No Email]
bob22

01-27-2005 16:51:29




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to thejdman01, 01-27-2005 13:19:25  
Bought my lawn tractor new in 1970 equipped with a Tecumseh engine. Have never touched the engine other than regular oil changes. I couldn't ask for a better starting tractor in zero temps to plow the driveway. It never lets me down.



[Log in to Reply]  [No Email]
HJP

01-27-2005 16:51:02




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to thejdman01, 01-27-2005 13:19:25  
MY DAD GAVE ME HIS GILSON (MONTGOMERY WARDS)SNOW BLOWER HE HAD BOUGHT NEW IN 1979.THIS IS 1/27/05
THIS UNIT HAS A BRIGGS 8 HP
IT STILL OUT POWERS MY NEIGHBORS ARIENS/JOHN DEERE HANDS DOWN WITH A TECUMSEH THEN AGAIN IT HAS 4 BLADES ON THE IMPELLER VS 3
I CANT EVEN FIND ONE BUILT LIKE THIS ONE (ANYWHERE)



[Log in to Reply]  [No Email]
Mark - IN.

01-27-2005 16:30:34




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to thejdman01, 01-27-2005 13:19:25  
Well, I guess to each his own. I've not had anymore problem with any Tecumseh than any others. Much like Briggs, they are a lower end cost bread and butter peice of machinery, unless you start getting into I/C's or Vangards. But then again, you can start getting into higher ended Tecumsehs as well. Kohlers tend to be fine, and can also get into Wisconsin Robbin and others. Generally speaking, I've never had problems with Tecumsehs, except when trying to run on "re-formulated" gas, but then again, all small engines tend to have problems with the carb getting gummed up with re-formulated gas.

What's re-formulated gas? It's that super chemical treated stuff that by federal law must be sold in, around larger metropolitan areas and collar counties if population exceeds ???. In theory, it emits less polution when burned, gallon for gallon. The problem is that is so impotent that have to burn more of it to get the same power out of it, and it costs more to refine and mix. So, ends up polluting more in the long run. Thanks, Al Gore for that one. Actually, you're going to start seeing more and more problems with small engines because more and more gasoline producers are beginning to "re-formulate" across the board instead of just in heavily populated areas, perhaps by federal mandate. Amoco has been doing it for years with "Gold", and now Shell's doing it with that stuff they call V-something or other, and my Hog knows the difference. I don't run either anymore.

I've never had anymore problems with Tecumseh's than any other in it's class, winter or summer.

[Log in to Reply]  [No Email]
oldrustycars

01-27-2005 15:55:42




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to thejdman01, 01-27-2005 13:19:25  
snowthrowers have been where tecumseh has been strong for years. they have the heat enclosure around the carb, no air filter, mitten grip recoil handle, i dont know why, but its been this way forever. the 110 volts starter is also a reason. snapper, who loves briggs engines, uses tecumseh on most snowthrowers. my garbage picked craftsman blower, which hadnt been run in years, worked great after cleaning out the carb and tank. i didnt even put a kit in the carb.

[Log in to Reply]  [No Email]
thejdman01

01-27-2005 15:21:11




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to thejdman01, 01-27-2005 13:19:25  
but why wouldnt techumsah run or hold up in summer weather yeah the heat is hard on all engines but why is it hard esp on techumsah vs briggs?



[Log in to Reply]  [No Email]
thejdman01

01-27-2005 15:20:28




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to thejdman01, 01-27-2005 13:19:25  
but why wouldnt techumsah run or hold up in summer weather yeah the heat is hard on all engines but why is it hard esp on techumsah vs briggs?



[Log in to Reply]  [No Email]
fepo

01-27-2005 13:48:33




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to thejdman01, 01-27-2005 13:19:25  
from my experience I would stay far away from Tec engines. I've worked on them, and B&S, and the briggs is far easier to repair and then come back to life. Also the quality of construction and engineering design is better in the B&S. The Tec just dont like to be fixed, seems that they just die and want to be left that way... anyhow thats what I have noticed.

Honda and other engines are in a different category all together so I leave those out in this discussion.

[Log in to Reply]  [No Email]
Pitch

01-27-2005 14:29:37




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to fepo, 01-27-2005 13:48:33  
Snow blower is the only place a Tecumseh belongs. I've had them on cheap trim mowers and they just don't seem to like the summer hear never had one last. The only problem I've ever seen in one of their Snowking blower engines is that the carbs gum up real easy if not run toatally dry in the spring before storage. B&S seems to be awfully hard starting in subzero weather.



[Log in to Reply]  [No Email]
JoeK

01-27-2005 22:16:56




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to Pitch, 01-27-2005 14:29:37  
I use ta cuss Tecs,and hated working on em to the point of even turning down Tec related income.Then one day I got POed at myself and sat down and did a little comparative research on em and why they were hated.As someone else said,there were good ones and a couple bad ones which didn't hold up well.I found that the majority of Tec problems seemed to be carburation,specifically,lack of fuel delivery.Looking at the carb designs you will see that Techs are vastly different from Briggs,in effect very fussy in both cleanliness and adjustment.Too little fuel by adj or crud restriction will burn em up and too much will carbon em up and wash the oil outta the cylinder,causing premature wear.Often a Briggs will run even with the carb filthy.Tecs have tiny carb passages and a grain of dirt,a bit of varnish,you're all done.Tec manuals clearly state that seasonal engines,should have the carb run dry before storage.If there is fuel or water in the carb,it will booger up the internal/inaccessable metering rod,in some cases so badly that the carb body must be replaced.This will not happen in a "dry carb".Same with the tiny"pizzhole"in the main jet body.I probably deal with 10-15"No start" Tec snowblowers every season...Majority are gravy money,drain the old stale gas,clean the hole in the jet and "Away we go",got it down to about 10 min now(Minimum Labor Fee Applies).Laughable idea I know,but think of your Tecs as "Hi Performance"fussy.Think of your Briggs etc as that ole 6cyl pickup with 150K miles thats never letcha down.
Clean fuel,regular oil changes with good oil,dry carb storage and a tiny bit of understanding will keep your Tec happy for yrs.
68Lambert 5/22,70Lambert 6/22,72Ariens 7/24,75Sunbeam 7/24 blowers,66 Swisher 6hp Big Mow Rider,85 Wizard 14/38 Tractor,all Tecs and all on original engine.Nothin against Briggs at all,have a couple 3 of them on Mowers too :)

[Log in to Reply]  [No Email]
fepo

01-28-2005 07:53:14




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to JoeK, 01-27-2005 22:16:56  
good to see someone's making money on it :)
but you must have lots of patience as well... I cant remember how many times I took to kicking the damn Tec so hard to knock over the complete snowblower. I dont like the B&S all that much, but find them much better than Tec's.
All my B&S engines start on 2 pulls, never had a problem.

The carb is what makes the difference between a good engine and not so good. That's the same for the Partner saw's and Stihl saws. Partner's had a good strong market lead way back, but they had fussy carb's, they would flood easy if the user wasnt careful during starting ie:leave stop switch on stop and then crank. While the Stihl carbs were much more forgiving, so they took the market. But that doesnt mean the Partners are crap, they are still very good saws as long as the user knows what their doing.

[Log in to Reply]  [No Email]
stihltech

01-30-2005 16:06:20




Report to Moderator
 Re: Techumsah engines and snowblowers in reply to fepo, 01-28-2005 07:53:14  
It is like anything. Take care of it and it will last. Tecumseh carburetors go bad. Yep, most anything with a fuel bowl full of water will. Maintenance book will tell you to dran tank after each season. Maybe 1 out of 100 does it.
Bad motor? Yep, espcially when it gets down to the last teaspoon of oil in the crankcase because nobody ever checks it.
It is very seldom I have seen a motor fail due to a bad part. There is usually a reason.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy