Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Air Compressor Shopping

Welcome Guest, Log in or Register
Author 
thynes

01-16-2005 10:43:24




Report to Moderator

I need a new larger air compressor. The two that I use in parallel are not cutting it for sandblasting, painting, etc.

I have about $500 to spend. It can be 220v. I have been looking at Sears, HomeDepot, Lowes, etc., and haven"t been able to narrow the list yet...

Anyone have a favorite that will put out about 10 cfm?

Thanks, Tim Hynes




[Log in to Reply]   [No Email]
Big Jim

01-17-2005 22:32:29




Report to Moderator
 Re: Air Compressor Shopping in reply to thynes, 01-16-2005 10:43:24  
$500 likely won"t cut it but check out these folks for some solid, moderately priced units

http://www.eatoncompressor.com/page/page/504413.htm



[Log in to Reply]  [No Email]
thynes

01-18-2005 19:43:57




Report to Moderator
 Re: Air Compressor Shopping in reply to Big Jim, 01-17-2005 22:32:29  
Big Jim,

What Eaton compressor do you have? I have looked at their site and they do seem to have the most bang for the buck. The only drawback is shipping, ~$150, and no 1 year free financing like Sears.

I think that I have to agree that I should spend a little more now and eliminate the need for future upgrades...

Tim



[Log in to Reply]  [No Email]
old blue

01-16-2005 17:32:15




Report to Moderator
 Re: Air Compressor Shopping in reply to thynes, 01-16-2005 10:43:24  
I guess now a days you have to take what you can get off the assembly line, i sure miss the days of emglo production before the dewalt days.

from what i gather down at the marine core recruit depot in paris island south carolina they have a huge old emglo compressor.


man do i miss the good old days



[Log in to Reply]  [No Email]
Chris Long

01-16-2005 16:59:38




Report to Moderator
 Re: Air Compressor Shopping in reply to thynes, 01-16-2005 10:43:24  
I second the Quincy advice. Also, the CH unit that was mentioned below is available from Grizzly at about $1550. However, I found a local (Seattle) machinery dealer that sold me a brand new Quincy QT-5 80 gallon, 17 CFM @150 PSI, 5HP unit for $1600.00. I went for the Quincy, as the difference in price was insignificant compared to the difference in quality. They make an excellent compressor. It runs my blast cabinet @90 PSI with about a 25% duty cycle.

Cheers,

Chris

[Log in to Reply]  [No Email]
720Deere

01-16-2005 15:28:01




Report to Moderator
 Re: Air Compressor Shopping in reply to thynes, 01-16-2005 10:43:24  
I know this is not the answer that you are looking for, but you really need to save up and go whole hog. I have an 11.5 cfm 60 gal compressor and thought that it was bigger than I would ever need. Wrong again! You are going to need to spend at least $1000 to get anything close to being effective on a sandblaster. Most continous use air tools (sander, drill, cutoff wheel, etc.) will run my compressor to the max. I sure wish that I would have spent another $500 at the time when I purchased this one. Now I'm out $500 and will have to spend over $1000 for something adequate.

[Log in to Reply]  [No Email]
DL

01-17-2005 18:47:11




Report to Moderator
 Re: Air Compressor Shopping in reply to 720Deere, 01-16-2005 15:28:01  
Funny you should mention this... I saved up a bit of cash & bought a 7 1/2 hp compressor... $1200 on a close-out deal (store was going out of business)... it produces about 25 - 27 cfm @ 175 psi... thought my worries were over. It runs most air tools exceptionally well (except for the BIG impact wrench)... but is PAINFULLY slow when blasting. I finally broke down & bought a gasoline powered compressor (175 cfm @ 125 psi) and a pressure pot and blasting is finally do-able. (although the pro's use much more air & get the job done in 1/2 the time it takes me!!!) Moral of the story: if you want to get some serious work done with air tools... save yer' pennies & buy the BIGGEST compressor you can find (with a cast iron pump) HTH,
regards, DL

[Log in to Reply]  [No Email]
David - OR

01-16-2005 13:26:20




Report to Moderator
 Re: Air Compressor Shopping in reply to thynes, 01-16-2005 10:43:24  
You need more like 20 CFM to sandblast with the typical 90 pound pressure pot and a 1/8 inch nozzle. Even that gets dicey as the nozzle wears and opens up. I use a 5HP 2 stage Ingersoll-Rand compressor that I bought for $900 at Home Depot a few years ago. It can keep up with the blaster, but it has to run continuously to do so.

A sandblast cabinet may work OK with less air, but you will be limited to smaller parts.

[Log in to Reply]  [No Email]
Charles (in GA)

01-16-2005 12:27:50




Report to Moderator
 Re: Air Compressor Shopping in reply to thynes, 01-16-2005 10:43:24  
I'm going to suggest something much larger, and more expensive.

Yes, I know, its isn't the best, but its pretty darn good, Cambell-Hausfeld makes a true 7.5 horse, 80 gal two stage compressor. It produces about 24 CFM and has an American made pump on it. Its a pretty darn good compressor, but the C-H branded units are a little expensive for what they are. BUT, if you go to Home Depot, they have this same compressor under the Husky name. Not all stores will have it, but look for the one that sells for about $1599 (was $1499 but they went up) with the mag starter. Now, wait till Home Depot has one of those sales where you get one of their credit cards, and pay no interest for a year. This is what I did, waited about 6 mos. paid half of it, waited another two months, paid half the remainder, and in about two more months paid the remainder, then after I was sure it was all zeroed out, I canceled the card.

One other option for this same compressor. www.grainger.com sold this same compressor under their Westward brand name. I've looked at it in the store, complete witht the Cambell-Hausfeld name on the tank certification plate. Its been discontinued but some stores and distribution centers still have it. The Grainger number is 5Z639 and its $1457 and includes the mag starter.(look for it to go lower.) The three phase version (p/n 5F565)was $1205 (no mag starter on it) and has been reduced to an amazing $791. I'm not sure what a single phase 7.5 motor and a starter costs, but that may still be a bargain.

Charles

[Log in to Reply]  [No Email]
lucasss

01-16-2005 12:07:43




Report to Moderator
 Re: Air Compressor Shopping in reply to thynes, 01-16-2005 10:43:24  
the campbell housfeild 2 cylinder with 80 gallon tak puts out 9 or 10 cfm and should be in that price range.would get the all cast pump with ball bearings on the crank.you can look in the papers with it in the parts diagram and see.they make one pump with needle brgs and one with ball brgs.. but if your going to run your compressor all day or hours on end daily you need a quincy but 500.00 wont buy a good quincy..i used a campbell-h 2 cyl single stage 80 gal tank in a mower shop for 10 years and it was very adequate and is still going , but a da sander or sand blasting cabinat would run it down pretty good .good luck, lucas

[Log in to Reply]  [No Email]
Glenn F.

01-16-2005 13:45:23




Report to Moderator
 Re: Air Compressor Shopping in reply to lucasss, 01-16-2005 12:07:43  
I'm with you on the Quincy! I have an old 3hp. Quincy. I am sure I could run it continuously till the day I die and there would still be some left for my kids! Glenn F.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy