Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Using CO2 to power Air Tools?

Welcome Guest, Log in or Register
Author 
John Fiorentino

11-08-2004 08:30:03




Report to Moderator

I recently ordered a CO2 tank / kit designed to air up tires. The manufacturer says you can also run air tools off the tank for remote air tool use. Question, the regulator is fixed for 150 PSI output, most air tools run at 90PSI. What are the dangers involved with running at a higher PSI rating? Will the tools break down? or is 90 the minimum suggested PSI rating to run a tool?

John




[Log in to Reply]   [No Email]
Charles (in GA)

11-11-2004 15:51:24




Report to Moderator
 Re: Using CO2 to power Air Tools? in reply to John Fiorentino, 11-08-2004 08:30:03  
As BuickandDeere noted, do not use this in a confined space, bottom of a manhole, inside of an aircraft fuel tank, etc, you will die as a result. This has happened several times at different airlines when nitrogen was used to power air drills for people working inside of fuel tanks.

I would think constant pressure above about 100 psi would be bad on your tools in the long run, as they are not designed for this. I don't think I would abuse by tools this way. At work when the 1/2 inpact won't break it loose, we either go to the 3/4 (or 1") or up the hose size. Our 1" impacts are operated on 3/4 hoses!!! We usually use 1/4 hoses but have many 3/8 hoses in use also. Barring that, I use a hose doubler to plug two hoses to the air tool. The additional volume, with the same 100 psi works wonders. This is an airline maintenance hangar. We leak more air every hour than most people use in a lifetime!!!

Charles

Charles

[Log in to Reply]  [No Email]
Roger R

11-10-2004 09:57:30




Report to Moderator
 Re: Using CO2 to power Air Tools? in reply to John Fiorentino, 11-08-2004 08:30:03  
FWIW:
I've been using 20# CO2 cylinders for about 15 years. The one I use the most, I had converted to N2. The guy who introduced me to using these tanks for my air nailers told me he had a CO2 tank blow the safety while driving in his van. He said he thought he had died for a minute and everything was covered with white powder. This was in Phoenix where it gets pretty hot and presumeably the gas expanded, blowing the release valve. From then on, he converted his tanks to N2, which is more stable. I did the same. N2 is also considerably lighter, making a difference going up stairs, etc. It's about the same cost to refill as CO2.
.02
RogeR

[Log in to Reply]  [No Email]
John Fiorentino

11-10-2004 10:45:14




Report to Moderator
 Re: Using CO2 to power Air Tools? in reply to Roger R, 11-10-2004 09:57:30  
I found the following on the web about CO2 v/s Nitrogen. Just through I'd share...

8. Why CO2 instead of air or nitrogen?
The SOURCE� stores CO2 in liquid form which results in air storage 3 times the energy of nitrogen or air. This means you are storing three nitrogen tanks in one using the the SOURCE�.

9. Is CO2 gas safe on my equipment?
CO2 is non-toxic, non-corrosive, and totally inert. This means its safe on your air tools, tires & metal wheels. The thermal expansion is similar to air once released from the tank.

[Log in to Reply]  [No Email]
Roger R

11-17-2004 06:32:36




Report to Moderator
 Re: Using CO2 to power Air Tools? in reply to John Fiorentino, 11-10-2004 10:45:14  
Hi John;
Thanks for providing that info. Perhaps the individual whose tank's safety blew inside his van reached the wrong conclusion about the cause. I dunno. The primary tool use with a tank is a finish nailgun. I have both N2 and CO2 tanks and as for one lasting longer than the other, I have never noticed the difference. That's not to say that there isn't any, just that it's not as drastic a difference as the 3x the energy as stated in your research. One thing for certain, you can definitely tell the difference if you have to lug both these tanks for any distance or going up stairs. When all is said and done, the N2 tank is the hands down favorite- for me! :-)
RogeR

[Log in to Reply]  [No Email]
Mike M

11-09-2004 18:42:24




Report to Moderator
 Re: Using CO2 to power Air Tools? in reply to John Fiorentino, 11-08-2004 08:30:03  
I would think that CO2 would get awfully cold and maybe even freeze up your air tools useing that much.



[Log in to Reply]  [No Email]
JeffE

11-10-2004 05:04:19




Report to Moderator
 Re: Using CO2 to power Air Tools? in reply to Mike M, 11-09-2004 18:42:24  
Nope, doesn't really matter if it's CO2 or air from a tank, when a gas expands it cools off, that's the basic principle of a refigerator. Maybe you're thinking that the small CO2 cartridges cool off a lot when used, that's because they are small and the gas expands/escapes quickly and cools it down fast. On a bigger tank it won't matter whether you are using air/CO2/nitrogen, etc, they will all cool the tank down a bit. Within reason, a gas is a gas at the pressure changes they want to use here.

[Log in to Reply]  [No Email]
Chris Brown

11-09-2004 17:35:20




Report to Moderator
 Re: Using CO2 to power Air Tools? in reply to John Fiorentino, 11-08-2004 08:30:03  
My compressor cuts on at 130 or so and off at 165. I run air tools without a regulator and have had no problems. Once I had wheel nuts on a big truck we could'nt budge,so I cranked the pressure up to around 200 psi and the CP 1/2 impact did the job.



[Log in to Reply]  [No Email]
rad

11-09-2004 15:54:10




Report to Moderator
 Re: Using CO2 to power Air Tools? in reply to John Fiorentino, 11-08-2004 08:30:03  
Am I missing something here? Why don't you just buy a little regulator and use it to reregulate 150PSI down to the 90PSI you want. I keep a number of them in my shop with air fittings so I can regulate a line to teh appropriate pressure for paint guns, staplere or other air tools. They can be had for as little as $5.00 from Harbor Freight on sale.



[Log in to Reply]  [No Email]
John Fiorentino

11-10-2004 10:43:00




Report to Moderator
 Re: Using CO2 to power Air Tools? in reply to rad, 11-09-2004 15:54:10  
A different regulator is definately a possible choice, but it sounds like many if not most folks run their air tools at 150psi. I don't forsee using this too often. Mainly for emergencies while on the road.



[Log in to Reply]  [No Email]
Guy

11-09-2004 13:30:28




Report to Moderator
 Re: Using CO2 to power Air Tools? in reply to John Fiorentino, 11-08-2004 08:30:03  
I use scuba tanks to air tools all the time at 140-150 lbs of pressure with no problems.



[Log in to Reply]  [No Email]
buickanddeere

11-08-2004 11:17:00




Report to Moderator
 Re: Using CO2 to power Air Tools? in reply to John Fiorentino, 11-08-2004 08:30:03  
If working near the bottom of a confined space you will smother yourself on C02 or N2.



[Log in to Reply]  [No Email]
Davis In SC

11-08-2004 09:31:56




Report to Moderator
 Re: Using CO2 to power Air Tools? in reply to John Fiorentino, 11-08-2004 08:30:03  
I keep a tank of nitrogen to air up tires, & run an impact wrench. A lot easier than toting a compressor around. Being an inert gas, nitrogen also slows down rotting of inside if tire & rusting inside rim. I guess it is dangerous, but I have run an I-R 1/2 in. impact at 250 PSI before. NASCAR teams uses nitrogen both to fill tires & to run impacts in the pits.



[Log in to Reply]  [No Email]
Bob

11-08-2004 08:35:14




Report to Moderator
 Re: Using CO2 to power Air Tools? in reply to John Fiorentino, 11-08-2004 08:30:03  
The 2-stage air compressor in my farm shop runs at 180 PSI, and I use normal air tools with it with no problems. Not OSHA approved, and maybe not the best idea, but I've not had any problems.



[Log in to Reply]  [No Email]
Chris Vangel

11-08-2004 12:53:42




Report to Moderator
 Re: Using CO2 to power Air Tools? in reply to Bob, 11-08-2004 08:35:14  
I have worked in a number of auto shops and not a single one ran it"s air system at 90psi, the miminum was 125psi and the max around 150-160 psi.

I have ingersoll-rand, snap-on, mac, and other smaller names. I have never damaged a single one using that kind of pressure. I think things would be under powered at 90 psi.

These tools would be 1/2 & 3/8 impacts, 1/4 & 3/8 air ratchets, air chisels, die grinders, muffler cutters, air guns, sanders, and air powered drills. the most important thing is that the air you use is moisture free and you follow that little tag on the tool that says to add a few drops of AIR TOOL OIL daily. Don"t use motor oil, WD-40, two-stroke oil, or whatever is laying around. The wrong oil can cause more probems.

just my .02 cents worth. well, maybe that was a nickels worth!

Chris.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy