Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Question fot TheRealRon

Welcome Guest, Log in or Register
Author 
ScottP

09-18-2004 10:04:34




Report to Moderator

Who is TheRealRon?
Tell us your story. Like where you have worked or are your self employed? What are your qualifications? I and others have noticed that you seem to have a problem with T_Bone, well T_Bone told us who he is and what his qualifications are. What about you?
Are you willing to let us know what your qualifications are? You have called several peoples' posts into question, what real life experances do you have to question them? Give us the reasons' we should belive your posts over theirs!
Scott

[Log in to Reply]   [No Email]
JT

09-20-2004 07:01:43




Report to Moderator
 Re: Question fot TheRealRon in reply to ScottP, 09-18-2004 10:04:34  
I am not a big "Real Ron" fan, he also puts a lot a smart comments on some of my posts also. But he does have some valid points and at times I think maybe he is having a bad day. I hope Ron nor T Bone go away. I love T Bone's post, usually I will learn something. On Ron's post, I love to read his for two reason, sometime's I learn something, but most of the times he is entertainment for me. At times he is hilarious. The way I look at it any more is if I put a post anywhere, 80% of the time I know I am right, the other 20%???. So I just laugh and go on, there is no sense getting upset over anybody that does not make any senseat times.

[Log in to Reply]  [No Email]
Jim Cent IL

09-19-2004 17:54:50




Report to Moderator
 Re: Question fot TheRealRon in reply to ScottP, 09-18-2004 10:04:34  
I find that the real Ron, and T - Bones are the responces I pay the most attention to...



[Log in to Reply]  [No Email]
Qualifications?

09-19-2004 04:50:20




Report to Moderator
 Re: Question fot TheRealRon in reply to ScottP, 09-18-2004 10:04:34  
By qualifications, do you mean a piece of paper with a gold stamp on it? You and I both know that if you had some qualifications along with a dollar, you could buy a cup of coffee with it. Some of the most knowledgeable and skillful craftsmen I know have no formal training or qualifications at all.



[Log in to Reply]  [No Email]
Harvey

09-19-2004 04:26:57




Report to Moderator
 Re: Question fot TheRealRon in reply to ScottP, 09-18-2004 10:04:34  
I think we should cut the guy a little slack, forgive and forget or whatever you want to call it. From reading his posts over the past few weeks he seems to be coming around, but he still seems to have a 'thing' for T Bone, perhaps that will change with time. Like so many others on this forum, the Real Ron does, at times, offer good advise.



[Log in to Reply]  [No Email]
Leland

09-18-2004 20:45:37




Report to Moderator
 Re: Question fot TheRealRon in reply to ScottP, 09-18-2004 10:04:34  
Leave RON alone he shoots from the hip, and is usually right. I bet he's 5-5 and as mean as a wolverine and can back up his mouth.



[Log in to Reply]  [No Email]
paul

09-18-2004 23:41:08




Report to Moderator
 Re: Question fot TheRealRon in reply to Leland, 09-18-2004 20:45:37  
I wouldn't mind at all if he would back up his mouth.

Gotta be hard to be that mean without even thinking all the time. I sure have my days too, but _every_ day????

So, if Ron is always right, then you think I am a moron too?

He does have good advise several times, I try hard to like the guy. But then the name calling starts in again. And it apears he has never ever been wrong in his life - not even once.

Oh well, I just don't bother with his posts any more, best way to deal with it.

--->Paul

[Log in to Reply]  [No Email]
Allan in NE

09-18-2004 11:31:21




Report to Moderator
 Re: Question fot TheRealRon in reply to ScottP, 09-18-2004 10:04:34  
Hey Guys,

What say we ease up on this fellow just a little?

Yes, I know. He was coming off like a she bear with a bunch of pups there for awhile; but I've noticed a definite improvement in the tone in the past few days and really think the old 'people skills' are improving and smoothing out.

What say we give him the benefit of the doubt instead of continuing to poke him with a sharp, pointed stick? That does no one any good.

Just my view,

Allan

[Log in to Reply]  [No Email]
Paul Janke

09-18-2004 19:15:27




Report to Moderator
 Re: Question fot TheRealRon in reply to Allan in NE, 09-18-2004 11:31:21  
The improvement is noticeable (and much appreciated), with an occasional slip back to old habits.



[Log in to Reply]  [No Email]
big fred

09-18-2004 14:22:01




Report to Moderator
 Re: Question fot TheRealRon in reply to Allan in NE, 09-18-2004 11:31:21  
When yer only tool is a pointed stick, every problem looks like a sleeping grizzly bear. Or something like that.



[Log in to Reply]  [No Email]
Weirsdale George

09-18-2004 11:22:38




Report to Moderator
 Re: Question fot TheRealRon in reply to ScottP, 09-18-2004 10:04:34  
When you are on an internet forum, do not take anyone's word for granted, no matter what the qualifications. You get what you pay for -- you pay nothing, you should expect to get nothing. When you do a gem, be thankful. When taking advice off the net, use your own common sense and consider the past track record of the advice giver.

Yes, TheRealRon sometimes is a little rough around the edges, but, for the most part, I have found him to have valid comments.

[Log in to Reply]  [No Email]
ScottP

09-18-2004 11:47:07




Report to Moderator
 Re: Question fot TheRealRon in reply to Weirsdale George, 09-18-2004 11:22:38  
George
Its' a givin that you take advice from the internet with a grain of salt, and that you have to use common sense.
Scott



[Log in to Reply]  [No Email]
Missouri Boy

09-18-2004 10:58:43




Report to Moderator
 Re: Question fot TheRealRon in reply to ScottP, 09-18-2004 10:04:34  
He nose a lot



[Log in to Reply]  [No Email]
Leland

09-18-2004 20:47:24




Report to Moderator
 Re: Question fot TheRealRon in reply to Missouri Boy, 09-18-2004 10:58:43  
It's spelled knows



[Log in to Reply]  [No Email]
Tom in TN

09-18-2004 21:12:14




Report to Moderator
 Re: Question fot TheRealRon in reply to Leland, 09-18-2004 20:47:24  
Leland,

That depends on whether or not his real name is Pinocchio. :-)



[Log in to Reply]  [No Email]
brian1

09-18-2004 19:04:07




Report to Moderator
 Re: Question fot TheRealRon in reply to Missouri Boy, 09-18-2004 10:58:43  
I think that it is only fair that if you hold yourself out as an expert on almost any topic that you should be ready to post your credentials. That/those I would also take with a grain of salt.



[Log in to Reply]  [No Email]
old art

09-19-2004 21:01:19




Report to Moderator
 Re: Question fot TheRealRon in reply to brian1, 09-18-2004 19:04:07  
i read a lots of Q. & A. here there almost always an easy way to solve a problem i feel that i lern some thing every day how to solve my problems those people who answer questions give what they think is right myself inclueded iam not always right or wrong but i try to help like every one else dose. thanks for your time . arthur



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy