Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Water pressure drops to zero

Welcome Guest, Log in or Register
Author 
Rob

08-17-2004 06:12:55




Report to Moderator

You guys did so well on that expansion tank/well question I've got to ask a question myself.
I've got a jet pump and the system is pretty much running fine. I got water pressure and when it drops down to 20psi or so the pump comes on and it's right there the problem occurs. When that pump comes on the dang pressure and flow drops to zip! Nada, a dribble for a small period of time, maybe only 1/2 second, maybe more but not 2 seconds. Then it comes back up gangbusters.
What's up with that?

[Log in to Reply]   [No Email]
Lj

08-17-2004 16:35:04




Report to Moderator
 Re: Water pressure drops to zero in reply to Rob, 08-17-2004 06:12:55  
If this just started and the tank and and witch have been in use for some time before the problem accured then the pressure switch or tube leading to switch is clogged. If this is a newer install then the air is not set right



[Log in to Reply]  [No Email]
Joe (Wa)

08-17-2004 23:16:02




Report to Moderator
 Re: Water pressure drops to zero in reply to Lj, 08-17-2004 16:35:04  
Bingo Lj, clogged tube got me many years ago.

Rob if the switch tube is plugging the diaphram in the switch may be damaged also. I change my switch and gauge about every 5 years. Cheap and easy maintenance.

Joe



[Log in to Reply]  [No Email]
Rob

08-17-2004 20:18:41




Report to Moderator
 Re: Water pressure drops to zero in reply to Lj, 08-17-2004 16:35:04  
That's good to know. I'll see if I can this straightened out in the morning.



[Log in to Reply]  [No Email]
Leland

08-17-2004 13:29:50




Report to Moderator
 Re: Water pressure drops to zero in reply to Rob, 08-17-2004 06:12:55  
Rob the easiest way to charge your tank is shut off water disconnect tank from line ,this is why you put drain valve on tank. then inflate tank to remove all water then lower pressure to 2lbs less than you low pressure setting on pump. I have to do this once a year



[Log in to Reply]  [No Email]
T_Bone

08-17-2004 10:28:29




Report to Moderator
 Re: Water pressure drops to zero in reply to Rob, 08-17-2004 06:12:55  
Hi Rob,

You have to high of precharge air pressure in your bladder tank. The correct pressure is 2psi less than pump kick on psi.

With too high of preset pressure then as the bladder tank runs out of water and the pump kicks on then it creates a water/pressure void in the piping system.

With 2psi less pressure then as the pump kicks on
there"s a small amount of water/pressure left over and thus no void in water or pressure.

If not corrected then the bladder will get a hole in it as the extra pressure pushs the bag past the threads of the supply pipe thus cutting the bag each time.

Even if you correct the problem now, plan on replacing the bladder tank very shortly as it"s just a matter of time that the bag will pop a hole. I wouldn"t not replace the bladder tank until it fails.

To set precharge pressure, shut the pump off, drain all water from the faucet, then add air to the bladder tank until 2psi less than pump kick on pressure.

T_Bone

[Log in to Reply]  [No Email]
Rob

08-17-2004 11:06:44




Report to Moderator
 That's a way to go. in reply to T_Bone, 08-17-2004 10:28:29  
I'm confused though. You say to high precharge on the tank but you say add air to the bladder tank. If the pressure in the tank is too high then I would have to remove air not add. Right?
Get me straight on that and I will probably adjust the expansion tank charge rather then crawl down in the pit and mess with the cut-in I can't even see without a mirror. I can accurately measure the cut-in pressure and precharge pressure. I can easily adjust the tank precharge, especially if all I have to do is remove some air. Sounds better than squatting in that pit.

[Log in to Reply]  [No Email]
T_Bone

08-17-2004 12:05:19




Report to Moderator
 Re: That's a way to go. in reply to Rob, 08-17-2004 11:06:44  
Hi Rob,

Yes you add/remove air until the precharge pressure reads 2psi less than pump cut on pressure.

Sorry about the confusion :)

T_Bone



[Log in to Reply]  [No Email]
TheRealRon

08-17-2004 11:12:12




Report to Moderator
 Re: That's a way to go. in reply to Rob, 08-17-2004 11:06:44  
T_bone is confused.

Do what John said, he got it right.



[Log in to Reply]  [No Email]
T_Bone

08-17-2004 12:19:29




Report to Moderator
 Re: Exposed To The Use Of Archives!!! in reply to TheRealRon, 08-17-2004 11:12:12  
Everyone notice that Ron only answers topics that have been answered in the archives???

A quick search of the archives will turn up most of the answers to the questions being posted.

Amazing!

T_Bone



[Log in to Reply]  [No Email]
TheRealRon

08-17-2004 13:55:51




Report to Moderator
 Re: Exposed To The Use Of Archives!!! in reply to T_Bone, 08-17-2004 12:19:29  
You are a liar.



[Log in to Reply]  [No Email]
A Parrott??

08-17-2004 14:41:17




Report to Moderator
 Re: Exposed To The Use Of Archives!!! in reply to TheRealRon, 08-17-2004 13:55:51  
Play nice.



[Log in to Reply]  [No Email]
TheRealRon

08-17-2004 15:25:39




Report to Moderator
 Re: Exposed To The Use Of Archives!!! in reply to A Parrott??, 08-17-2004 14:41:17  
Go away troll!



[Log in to Reply]  [No Email]
A Parrott ??

08-17-2004 13:44:51




Report to Moderator
 Re: Exposed To The Use Of Archives!!! in reply to T_Bone, 08-17-2004 12:19:29  
Yep. And you,T_Bone, seem to catch alot of flack.To bad too.Somethings just ain't right.



[Log in to Reply]  [No Email]
john *.?-!.* cub owner

08-17-2004 07:34:11




Report to Moderator
 Re: Water pressure drops to zero in reply to Rob, 08-17-2004 06:12:55  
Raise the cut in pressure for your pump just a little. A jet pump pulls water from the tank to operate, and your water in your tank is getting to the point that when the pump starts there is too little pressure and/or water left in the tank to provide any to the faucets, but as soon as it gets started pumping the supply and pressure are back up.



[Log in to Reply]  [No Email]
Rob

08-17-2004 09:22:13




Report to Moderator
 That's what I was thinking. in reply to john *.?-!.* cub owner, 08-17-2004 07:34:11  
Thanks.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy