Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tool Talk Discussion Forum

up-date on furnace blower

Welcome Guest, Log in or Register
Author 
rustyfarmall

08-04-2004 17:28:12




Report to Moderator

I covered about 1/2 of the discharge opening with a piece of pegboard, and plugged it in, the first thing I noticed was that the fan was much quieter, and seemed to be moving even more air than it did without any restriction. I just let it sit there and run, after at least 4 hours it was still running. Thanks to everyone who commented on this problem.




[Log in to Reply]   [No Email]
Bob

08-04-2004 17:30:26




Report to Moderator
 Re: up-date on furnace blower in reply to rustyfarmall, 08-04-2004 17:28:12  
Sometimes, it's the simple things that make things work! I've been through this a couple of times, and was sure it would work for you!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy