Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Purox Regulator Diaphram

Welcome Guest, Log in or Register
Author 
Bob F

05-07-2004 04:35:46




Report to Moderator

Can anyone tell me where to get a replacement diaphram for a Purox brand oxygen regulator for my Ox/Acet. torch. This looks to be a small (about 3/8 inch dia.) Brass disk. It sets below the pop-off. I think dad was using the rosebud tip and turned up the pressure too high and blew a hole in the diaphram and the pop-off did pop right off.
Any help would be appreciated.
Thanks
Bob F




[Log in to Reply]   [No Email]
arthur

05-08-2004 20:56:22




Report to Moderator
 Re: Purox Regulator Diaphram in reply to Bob F, 05-07-2004 04:35:46  
go to your welding gas suplyer he may repair them rember that tank when it is full the pressure is over 2000 pounds that little regulator brings it down to what you need..lol



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy