Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Tig or plasma cutter torch

Welcome Guest, Log in or Register
Author 
Steve Crum

02-27-2004 06:49:36




Report to Moderator

I have a torch head I recently won on ebay, this was advertised as a "machine tig torch" I thought from the picture it looked like a machine plasma cutter torch. The price was right in either case. It was made by Union Carbide and has the numbers PT 16 on the side of the torch head, it also has the gear rack for the machine Z axis 15' leads and coolent hoses. I would like to find some information on this. Anyone know of a web site or source please?

[Log in to Reply]   [No Email]
T_Bone

02-27-2004 12:29:11




Report to Moderator
 Re: Tig or plasma cutter torch in reply to Steve Crum, 02-27-2004 06:49:36  
Hi Steve,

You should be able to tell if it's a Tig torch by looking at the torch head componets. A Plasma head will have simular componets but with a gas shield screen and/or high pressure orifice below the tungsten.

A picture is worth a thousand words tho.

T_Bone



[Log in to Reply]  [No Email]
Steve Crum

02-27-2004 12:41:21




Report to Moderator
 Re: Re: Tig or plasma cutter torch in reply to T_Bone, 02-27-2004 12:29:11  
That's whats throwing me off, the tip looks like a plasma tip. But it has a tungsten electrode inside.
The electrode doesn't protrude as on a Tig. Were the electrodes on the early plasma torches way different than say on my Thermo Dynamics XL 100 with the PCH 80 torch?



[Log in to Reply]  [No Email]
T_Bone

02-27-2004 15:09:48




Report to Moderator
 Re: Re: Re: Tig or plasma cutter torch in reply to Steve Crum, 02-27-2004 12:41:21  
Hi Steve,

It sounds like a plasma torch "for welding" not cutting.

T_Bone



[Log in to Reply]  [No Email]
Steve Crum

02-27-2004 15:35:58




Report to Moderator
 Re: Re: Re: Re: Tig or plasma cutter torch in reply to T_Bone, 02-27-2004 15:09:48  
T bone send me an e mail so I have your address and I'll send a couple pictures for you to look at.
[email protected] (drop the second q in my address) this is done to screw up spammers search software



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy