Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

HOLDING WHEN CUTTING FIREWOOD

Welcome Guest, Log in or Register
Author 
SMARK

02-21-2004 16:04:09




Report to Moderator

I heat my house with firewood and cut my own wood. Is there a tool or method out there that works to keep light logs from rolling around while cutting with a Chainsaw? I hate having my Chain go into the Dirt or Snow and I just cant keep my wife sitting on the Logs all day.




[Log in to Reply]   [No Email]
Nolan

02-24-2004 06:12:58




Report to Moderator
 Re: HOLDING WHEN CUTTING FIREWOOD in reply to SMARK, 02-21-2004 16:04:09  
Saw a nifty fixture made once that allowed for the stacking of small stuff and cutting to length. It was essentially a trough like item, with slits in the side that you dropped the chain saw blade through. You'd load the fixture with wood, cut, nad take all the cut to length wood out.



[Log in to Reply]  [No Email]
scott

02-23-2004 21:02:06




Report to Moderator
 Re: HOLDING WHEN CUTTING FIREWOOD in reply to SMARK, 02-21-2004 16:04:09  
you guys are gonna cut your damn legs off. better keep your wife on the log, that way she'll know what to tell the ambulance people when they get there.



[Log in to Reply]  [No Email]
Fred OH

02-23-2004 12:29:28




Report to Moderator
 Re: HOLDING WHEN CUTTING FIREWOOD in reply to SMARK, 02-21-2004 16:04:09  
I guess I overbuilt my splitter. One day me and a friend were cutting firewood and thought we were all done and found a few more 3 or 4" limbs that needed cut to length for firewood but we had shut off the saws and put them in the truck. I still had the splitter running so just stuck them in and cut them off to length with it. Got to be a habit...but they really pop when the blade goes through on the good wood. Don't ruin your factory made splitter trying this...but it might pinch in two some small stuff to get rid of or kindle with. Fred OH

[Log in to Reply]  [No Email]
Jared in VT

02-22-2004 16:53:22




Report to Moderator
 Re: HOLDING WHEN CUTTING FIREWOOD in reply to SMARK, 02-21-2004 16:04:09  
SMARK, 'Aint nothing safe or easy about cutting wood, period. All you can do is wear the right gear, stand it the right spot and file the chain. I've got over thirty years experiance at this and I still don't know jack. (btw; it's a Peavy, invented in Old Town, Maine and a Log Jack) Because it is such a noisy, mindless task, this fitting fire wood job is mostly a solo gig. In the wood lot, I buck it into 4' lengths and get it back to the house. It moves quicker when it's 4' than when it's 4 pieces. I leave nothing but twigs. If I can pick it up, it can burn. I try to do a tidy job of stacking, because I'll cut it right from the pile. I have a scrap wood saw-buck, (that was invented by folks who moved to Arkansas) that I can pile a giant arm load of small 4' "biscuit wood" into and buck it all at once. I'll also use this once my big wood pile gets small. Otherwise I wade into the sort of neat wood pile of 3-4 cords and whack away at it with the chain saw. When I get sick of that, or when I'm tripping on the now stove size wood, I take a break and toss it into another pile, or the back of the truck for the ride to the wood shed.
If you are better with people than I and you have help, you can just watch them do it. Buy a pair of chap's and wear them. You'll look very cool once they get broken in, and your dance lessons are more fun and productive with both a right and left foot. Jared

[Log in to Reply]  [No Email]
Bill Smith

02-22-2004 12:13:03




Report to Moderator
 Re: HOLDING WHEN CUTTING FIREWOOD in reply to SMARK, 02-21-2004 16:04:09  
If smaller around than 2 to 3", just discard with the rest of the small tree limbs and cut down another tree. You have to cut up so dang much of that small stuff to make a cord of wood, that it really isn't worth messing with. As for stuff a little bigger around than that, just go along with saw parallel to the ground making cuts half way through. Flip or roll it over and go back and cut the other half of the cut from the top down. You can keep the saw off of the ground and out of the dirt that way. You can put it on a block of wood you have already cut out if you need too to avoid blade pinching. To prevent it from rolling, put one foot on what you are sawing. Make sure you maintain your own balance while sawing. I have always said a guy should never chain saw by himself in case an accident should happen.

[Log in to Reply]  [No Email]
bob

02-21-2004 19:01:16




Report to Moderator
 Re: HOLDING WHEN CUTTING FIREWOOD in reply to SMARK, 02-21-2004 16:04:09  
there is a small cant hook with a "T" welded on it. When you roll the log over & up on the "T" it holds it steady & off the ground. See baileysonline.com for pics.



[Log in to Reply]  [No Email]
Jeff

02-21-2004 23:38:41




Report to Moderator
 Re: Re: HOLDING WHEN CUTTING FIREWOOD in reply to bob, 02-21-2004 19:01:16  
The name you are looking for is a log Jack. a good one is over $100.oo but they sure work.The Cant is for rolling logs over and here is how I do it.Make notch cuts about 1/2 the way through with your saw horrizontal to the ground. Roll the log 180 degrees and finish the cut. Very little practice needed to do it this way and you will not tip in to the dirt. I love my old McCulloh 610 saws with 20" bars and full chisel! Power baybeee!

[Log in to Reply]  [No Email]
Slowpoke

02-22-2004 13:57:00




Report to Moderator
 Re: Re: Re: HOLDING WHEN CUTTING FIREWOOD in reply to Jeff, 02-21-2004 23:38:41  
Northern Tool....3' long handle. $33 + S&H.



[Log in to Reply]  [No Email]
Arkansas Solution

02-21-2004 18:42:49




Report to Moderator
 Re: HOLDING WHEN CUTTING FIREWOOD in reply to SMARK, 02-21-2004 16:04:09  
Hi SMark,
My ancestors came from Arkansas, the land of low-effort solutions. Now here in Texas I don't cut much wood for the fireplace, but more for the BBQ. Here's what I do: use a 4-to-6" diameter stick of cut wood as a prop under the log to cut; put your left foot(if needed) on the log and make the cut directly over or to the right of your prop. That way if you cut into the prop it won't damage the blade. I try to set the prop 2 feet in from the end of the log, then cut two 12" pieces before moving the prop again. Good luck! Tex Ferguson

[Log in to Reply]  [No Email]
Carol Martin

02-21-2004 17:00:35




Report to Moderator
 Re: HOLDING WHEN CUTTING FIREWOOD in reply to SMARK, 02-21-2004 16:04:09  
Hi smark I cannot draw. so will have to describe what we
used to use when I was a kid on the farm.

It is a simple contraption..Four pieces of two by four about 3-3 1/2 feet long. Drill a 1 Inch hole in the center of each one. run a Dowel about 3' long through the holes. Two on each end making two X's
Across the top on each side fasten (bolts best) a 3" board. and the same on the bottom. If you put the 2/4s on the opposite way on each end you will be able to install a couple of cross braces to make it solider.. Now just drill holes in the bottom of the two by fours and put a rope across the bottom of the x to keep it from collapsing but allowing it to fold up. Maybe someone has a picture of one of these I know they were very common when I was growing up in Maine. Very handy for sawing small stuff. Just lay it across the top of the x's and it will not roll around.. You could use a couple pieces of ply wood on the bottom and would eliminate the need for bracing and you could just use Drywall screws to hold it on instead of bolts..


Carol

[Log in to Reply]  [No Email]
DL

02-21-2004 18:13:16




Report to Moderator
 Re: Re: HOLDING WHEN CUTTING FIREWOOD in reply to Carol Martin, 02-21-2004 17:00:35  
a sawbuck... we made 'em out of 4x4's... half lap 'em together & let 1x6's in on the top side of the "X's" ... forms a "cradle" for shorter stuff that might otherwise fall through.



[Log in to Reply]  [No Email]
Slowpoke

02-22-2004 01:26:49




Report to Moderator
 Re: Re: Re: HOLDING WHEN CUTTING FIREWOOD in reply to DL, 02-21-2004 18:13:16  
I find it much easier to cut firewood by felling the tree and trimming off all the brush. Then I start cutting 14-18" pieces from the small ends. You may have to reach over your head to cut some or stand on the lower limbs. Nothing holds the wood like the tree itself, it works fast, and only the limbs on the ground need to be held up for cutting.



[Log in to Reply]  [No Email]
Brian G. NY

02-22-2004 09:28:24




Report to Moderator
 Re: Re: Re: Re: HOLDING WHEN CUTTING FIREWOOD in reply to Slowpoke, 02-22-2004 01:26:49  
I'm with you slowpoke!



[Log in to Reply]  [No Email]
Carol Martin

02-22-2004 04:48:16




Report to Moderator
 Re: Re: Re: Re: HOLDING WHEN CUTTING FIREWOOD in reply to Slowpoke, 02-22-2004 01:26:49  
Hey Slowpoke: Didn't you ever hear of Chainsaw safty?? Never cut with saw above your head..Never Stand on insecure places...!! I know we all do it..

Carol



[Log in to Reply]  [No Email]
Slowpoke

02-22-2004 14:10:24




Report to Moderator
 Re: Re: Re: Re: Re: HOLDING WHEN CUTTING FIREWOOD in reply to Carol Martin, 02-22-2004 04:48:16  
Thanks for the warning. So far I haven't cut myself or my clothes. Sometimes I even use a safety belt when I'm high. In the tree, that is.



[Log in to Reply]  [No Email]
MacSC

02-22-2004 07:03:37




Report to Moderator
 Re: Re: Re: Re: Re: HOLDING WHEN CUTTING FIREWOOD in reply to Carol Martin, 02-22-2004 04:48:16  
SAFTY, SAFTY, SAFTY...I cut the tree up like slopoke and so far haven't sawed my head off while sawing up high but did damn near saw my kneecap off while sawing down low:) I figure the person that invented the chain saw was an evil masochist who loved the sight of blood!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy