Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Weld, but don't inhale!

Welcome Guest, Log in or Register
Author 
Hobby Welder

02-10-2004 18:04:56




Report to Moderator

I was just reading a advertisment by a law firm looking for clients in a class action suit that "Have used welding rods, and have symptoms of Shakiness, Distorted Facial Expressions, Loss of Equilibrium, Decreased Hand Agility, Difficulty Walking, Joint Pain, Loss of Short Term Memory, Slurred / Slow Speech, Stiffness in Muscles, Tremors." Apparently, these symptoms have been linked with "exposure to manganese from welding rod fumes."
With tongue in cheek, I think most of the people I know have one or more of these problems. But being more serious; has welding been determined to be that dangerous to your health?

[Log in to Reply]   [No Email]
T_Bone

02-13-2004 01:11:08




Report to Moderator
 Re: Weld, but don't inhale! in reply to Hobby Welder, 02-10-2004 18:04:56  
There's a local Attorney that runs a TV ad every now and again looking for people to join class action for welding related problems. I would think it's a waste of time.

I think you will find that everthing in this world will bother someone at some time. Just the law of nature.

Welding fumes are never good to inhale. If your turn your head at a angle while welding then most of the fumes will roll off the hood pretty well.

The most effective way is using a vaccuum to remove the fumes away from the welder and dulute them with more fresh air. A fan is not as effective as a vacuum source at the weld area for removing fumes.

I can tell you that my eye sight has improved since I've quit welding 8hrs a day.

T_Bone

[Log in to Reply]  [No Email]
Mark

02-11-2004 09:11:53




Report to Moderator
 Re: Weld, but don't inhale! in reply to Hobby Welder, 02-10-2004 18:04:56  
I look at it this way as I have been invited to participate in some of these.....stock market thievery....caught red handed.

Ok Joe Blow investment company has a sticky fingered broker. The company gets caught by SEC.

ABC law firm sees the article in the local news and realizes that this company could stand $50 million in litigation costs.....boom..... .. announce class action and notifies all clients of said company that they are participants.

The firm gets some % of the take (don't know how this is determined) but say it's only 20% which is $10 mil.. If there are 1 million persons holding said stock, (and assuming no fine print expenses for the consumer) that leaves 40 mil for us or $40..... ...WOW..... ;bbbbbut we were the ones who got duped out of (say) thousands and only got $40 while the lawyers pocketed $10 mil..... we need more deals like this.

Mark

[Log in to Reply]  [No Email]
Bigdog

02-11-2004 06:32:08




Report to Moderator
 Re: Weld, but don't inhale! in reply to Hobby Welder, 02-10-2004 18:04:56  
One word about those law firms that advertize like that on TV. They're not worried about your welfare. They are trying to line their pockets.
You may have seen the ad about neurontin and patients who had attempted or were successful in committing suicide. Our son was one of those patients. I thought that maybe if they were successful in stopping off label prescribing of this drug, it might save someone else's life. I called them. They assured me that my son's case was a good one and would likely be used in the litigation. They sent me a bunch of forms to sign. They tell you that there are no legal fees unless they collect. What they don't tell you (and you won't find out unless you read the forms carefully) is that research and investigation costs are not considered "legal" fees. And you will be billed for them whether the litigation is successful or not. After reading through their paperwork, I decided that they could care less about clients. It's a money driven business. They won't get any of mine.

[Log in to Reply]  [No Email]
Nolan

02-11-2004 02:49:09




Report to Moderator
 Re: Weld, but don't inhale! in reply to Hobby Welder, 02-10-2004 18:04:56  
Yes, welding fumes can be hazardous, use your brain when welding.



[Log in to Reply]  [No Email]
Davis In SC

02-10-2004 21:25:26




Report to Moderator
 Re: Weld, but don't inhale! in reply to Hobby Welder, 02-10-2004 18:04:56  
Isn't it noble of those lawyers to look out for our health & well-being??? I realize there are hazards related to welding, just as there are with most any activity, but are they concerned with our health or making millions in a class action suit ?



[Log in to Reply]  [No Email]
O. T.......... thurlow

02-11-2004 06:07:34




Report to Moderator
 Re: Re: Weld, but don't inhale! in reply to Davis In SC, 02-10-2004 21:25:26  
Happen to have read "King of Torts" by John Grisham? Make you really appreciate your local ambulance chaser..... .



[Log in to Reply]  [No Email]
kyhayman

02-10-2004 19:24:35




Report to Moderator
 Re: Weld, but don't inhale! in reply to Hobby Welder, 02-10-2004 18:04:56  
Manganese inhailation is a serious issue. Too many folks want to open a box of rods and start burning, figure every kind if just like the other. Different rods call for different safety equipment. I went to a workshop that Lincoln put on this summer and one of the things they talked about was the varying contents of manganese. For example the 7018 Excalibur (which are WONDERFUL) has a high concentration and you can exceed daily exposure long before you exceed daily exposure to fume.

[Log in to Reply]  [No Email]
old

02-10-2004 19:08:12




Report to Moderator
 Re: Weld, but don't inhale! in reply to Hobby Welder, 02-10-2004 18:04:56  
One word is YES but if you use your head and don't weld in say a 10X10 building with all the doors and windows closed its still safe. Or in other words make sure you have enough air comeing and going if in a building, the gases from welding are noy real safe to in hale



[Log in to Reply]  [No Email]
Ben in KY

02-10-2004 18:57:39




Report to Moderator
 Re: Weld, but don't inhale! in reply to Hobby Welder, 02-10-2004 18:04:56  
Some welding can be really bad, for example galvanized is really nasty.



[Log in to Reply]  [No Email]
Fern(Mi)

02-11-2004 04:56:11




Report to Moderator
 Re: Re: Weld, but don't inhale! in reply to Ben in KY, 02-10-2004 18:57:39  
I like a large fan blow easing the fumes away from myself and my galvanized work.



[Log in to Reply]  [No Email]
Ray,IN

02-10-2004 18:34:04




Report to Moderator
 Re: Weld, but don't inhale! in reply to Hobby Welder, 02-10-2004 18:04:56  
If all recommended safety precautions are followed welding is safe. The key is knowledge of the material you are using and the inherent hazards associated with them. Breathing a high concentration of oxygen for prolonged periods is poisionous to humans.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy