Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Status Report

Welcome Guest, Log in or Register
Author 
Allan

01-22-2004 17:59:06




Report to Moderator

third party image

Hi All,

Seems like I've been working since forever on these walls; but, I finally got 'em up.

Boss lady tells me that I should sand it all down before I put on the lacquer. Okay, that's on the list for tomorrow.

But anyway, it's coming along. 'Spose I gotta start thinking about that ceiling soon.

Allan

[Log in to Reply]   [No Email]
Chris in SeMo

01-24-2004 16:35:00




Report to Moderator
 Re: Status Report in reply to Allan, 01-22-2004 17:59:06  
Allan,That certainly is a beautiful garage,Just thinking about the ceiling.You probably will need something tough enough to stand up to the exhaust from a tractor if you work on them any.Just a thought,Thanks,Chris in SeMo.



[Log in to Reply]  [No Email]
Wayne

01-23-2004 20:50:28




Report to Moderator
 Re: Status Report in reply to Allan, 01-22-2004 17:59:06  
I'd never get anything done in this garage, it's just too purty.... You've done a beautiful job Allan, you should be proud of it. I'd love to have those walls in my house....



[Log in to Reply]  [No Email]
And Another

01-23-2004 08:03:32




Report to Moderator
 Re: Status Report in reply to Allan, 01-22-2004 17:59:06  
third party image

And the garage attaching to the house.



[Log in to Reply]  [No Email]
Another

01-23-2004 08:01:27




Report to Moderator
 Re: Status Report in reply to Allan, 01-22-2004 17:59:06  
third party image

Some of the guys have been wanting some more pictures.

So, here is one of the North wall.

Thanks All



[Log in to Reply]  [No Email]
ShepFL

01-23-2004 05:48:59




Report to Moderator
 Re: Status Report in reply to Allan, 01-22-2004 17:59:06  
Wow!

Nice looking shop! I really like that floor covering. What did you use? Will it hold up to petroleum products and repeated washings?

The T&G adds a very nice touch but for me slinging grease & oil would possibly ruin them :( On my walls I will just be hanging sheet rock as well as the ceiling. Again, nice looking shop and you should be very proud!



[Log in to Reply]  [No Email]
Allan

01-23-2004 06:03:09




Report to Moderator
 Re: Re: Status Report in reply to ShepFL, 01-23-2004 05:48:59  
Shep,

I started out just looking for some ordinary grey paint because I was tired of the cement bleeding dust all the time.

So, I went to Wal-Mart and the guy talks me into this "Floor Covering" stuff. It is formulated for floors, is resistant to hot tire peeling, oils, chemicals and the like. I've cleaned up spills with gasoline, diesel fuel and alcohol and so far I�ve not had a problem with it.

It was relatively cheap; $13 something a gallon. The down side was that it takes 2 full weeks to cure. After it has completely dried, it has a "rubbery" feel to it.

So far, so good; we�ll see how it handles the long haul.

Allan

[Log in to Reply]  [No Email]
Neal

01-23-2004 05:13:46




Report to Moderator
 Re: Status Report in reply to Allan, 01-22-2004 17:59:06  
Great looking shop. Last spring I had a 36 X 48 shop built, with two8 X 16 commercial overhead doors to the front and a 9 X 8 overhead to the rear. I should have listened to my wife and made it another 8 feet longer. Mine looked very similiar to yours when just built, very clean and a lot of room. Now it has 4 tractors, 4 welders, 2 welding tables, 34 tool boxes, 10 storage cabinets, steel storage shelving, and tons of tools. Howevwer, I love it and I am sure you will enjoy yours also.

I have 6 windows very similiar to yours and I put shutters outside and window grids on the inside, along with a 3 foot square coupla. I wish I would have built it 20 years ago. For some reason, no matter how big you b uild it, shortly it will be too small. Enjoy you nice looking setup.

[Log in to Reply]  [No Email]
Van in AR

01-23-2004 05:01:57




Report to Moderator
 Re: Status Report in reply to Allan, 01-22-2004 17:59:06  
Allen, Awesome shop! It looks great, good job! I would sheetrock the cieling maybe put some faux beams in for looks, might as well, the rest have the looks. I think the sheetrock would look OK with the T and G after it is done. I could only dream of that shop. Building a new on now, 40 X 70 heated pole building with a 30' carport roof extension on the end, all 14' cielings, if I used the T and G it would cost me a fortune. But man you did a bang up job! You should be proud of your work.
Van

[Log in to Reply]  [No Email]
Allan

01-23-2004 05:11:04




Report to Moderator
 Re: Re: Status Report in reply to Van in AR, 01-23-2004 05:01:57  
Hi Van,

I'm a bit ashamed of myself for spending this kind of money on this play-thing.

When I was a boy, I passed up an irrigated farm because the owner wanted $20K for the thing; I thought he was too high.

Now, for what I've got in this goofy garage, I could have owned that farm and paid all it's operating expenses for a year.

Don't get old; it makes you do really silly things.

Allan

[Log in to Reply]  [No Email]
John K

01-23-2004 07:41:09




Report to Moderator
 Re: Re: Re: Status Report in reply to Allan, 01-23-2004 05:11:04  
Allan I don't agree with you saying don't get old, it sure beats the alturnitive (dieing young).



[Log in to Reply]  [No Email]
Van in AR

01-23-2004 07:23:31




Report to Moderator
 Re: Re: Re: Status Report in reply to Allan, 01-23-2004 05:11:04  
Allen, Its OK to get old and do silly things! I'm looking forward to it myself, I could probably get away with anything if older, been married three years today (second wife), lets me have what ever I need or want as long as savings doesn't suffer and all the bills are paid. thats a good thing since I collect tools, old guns and old iron. My first wife would have a fit if I brought a hammer home, gosh I miss her - NOT! Like I said the shop is great and you deserve it and should enjoy it, besides if you ever do sell its a great selling point for the property.
Van

[Log in to Reply]  [No Email]
john

01-23-2004 04:36:06




Report to Moderator
 Re: Status Report in reply to Allan, 01-22-2004 17:59:06  
Allan,

first let me say... I hate you
secondly... nice shop.. I'm very envious of the size first and the appearance second.

I'm doing a frame off restoration in 1/2 of a 25x25 garage and it's getting a little crowded..

do you rent out space ? :-)

john



[Log in to Reply]  [No Email]
Vern-MI

01-23-2004 04:00:03




Report to Moderator
 Re: Status Report in reply to Allan, 01-22-2004 17:59:06  
I'm drooling!



[Log in to Reply]  [No Email]
KURT (mi)

01-23-2004 02:14:15




Report to Moderator
 Re: Status Report in reply to Allan, 01-22-2004 17:59:06  
Real nice, I wish I had the motivation I had 4 years ago when I built my house. I have a 50X22 garage that I need to complete. How much did that T-G board cost you?



[Log in to Reply]  [No Email]
Allan

01-23-2004 03:50:34




Report to Moderator
 Re: Re: Status Report in reply to KURT (mi), 01-23-2004 02:14:15  
third party image

Hi Kurt,

I'm almost ashamed to tell you. All four walls ran in at the other side of $1200. Four gallons of varnish and 2 reams of sandpaper: another $82.

This project is just an old man's foolishness; pure and simple.

Allan



[Log in to Reply]  [No Email]
Bob

01-23-2004 06:30:42




Report to Moderator
 Re: Re: Re: Status Report in reply to Allan, 01-23-2004 03:50:34  
Beautiful looking shop, Allen! Your wife might have a point with the dropped ceiling. I did finish mine with drywall just for the extra few inches of height it gave me, so consider if you might be lower than you want with the ceiling tiles.

Can you get your walk in door open very far, with the tool boxes setting there?



[Log in to Reply]  [No Email]
Allan

01-23-2004 06:51:00




Report to Moderator
 Re: Re: Re: Re: Status Report in reply to Bob, 01-23-2004 06:30:42  
Hi ya Bob!!

Yeah, it has three walk thrus and that one goes out to the deck so won't be used as much.

It opens okay tho.

Have a good one,

Allan



[Log in to Reply]  [No Email]
KURT Again

01-23-2004 02:16:11




Report to Moderator
 Re: Re: Status Report in reply to KURT (mi), 01-23-2004 02:14:15  
Be sure to put an alarm system in, those large tool cabinets could get ripped off.



[Log in to Reply]  [No Email]
Chris

01-22-2004 23:36:45




Report to Moderator
 Re: Status Report in reply to Allan, 01-22-2004 17:59:06  
Looks Great! If I had a shop like that I'd think I had died and gone to heaven! Would want to live in there rather than the house!



[Log in to Reply]  [No Email]
Not much help, but

01-22-2004 23:04:00




Report to Moderator
 Re: Status Report in reply to Allan, 01-22-2004 17:59:06  
What time's the bar open??



[Log in to Reply]  [No Email]
John A

01-22-2004 20:32:33




Report to Moderator
 Re: Status Report in reply to Allan, 01-22-2004 17:59:06  
Allan, Looks great! what an great place to work on things.
If I may suggest.....Get the ceiling up first, before you finish off the walls. Things happen when you are working over your head.
Great job.
Later,
John A.



[Log in to Reply]  [No Email]
Allan

01-23-2004 04:28:33




Report to Moderator
 Re: Re: Status Report in reply to John A, 01-22-2004 20:32:33  
Hey John!!

How goes it down in your neck 'o the woods?

Thanks for the kind remarks; now maybe you can give me some pointers on that (problem) ceiling.

I don't know what to do with it; furthermore, my mind's eye tells me that a sheetrock cap isn't going to tie in with those wood walls very well.

The wife says I should hang an acoustical 2" drop ceiling in white, which will help with the lighting and also help deaden the sound (Our offices are just the other side of the wall).

Whadda think?

Allan

[Log in to Reply]  [No Email]
John A

01-23-2004 20:58:38




Report to Moderator
 Re: Re: Re: Status Report in reply to Allan, 01-23-2004 04:28:33  
Allan, Hi, All is well here in Central Texas! Finely got some desperately needed rain last weekend. 7 ins here at the house. The winter wheat and grass is comming back out after a week of sunshine. 53 degrees here tonight. To... The celing on your shop. Again this looks like a fun place to go and get projects done. After the wall get lacqured they will darken to some degree I think. My mind first thought of sheetrock, taped and floated.....Then painted. But to what color, my mind went to white or a light variation there of, But dust,dirt, fly and insects speks, No. Maybe paint it to match the door, or paint it aluminiune paint, that would be different and give some light reflection over the darker light absaorbing darker paint that is the floor coating.
Off the top of my head I don't have a good second choice for you.....
I have seen some restrauants use old corrogated sheet iron (roofing) for ceilings. In your application, New would offer a unique look to your shop area. With light reflection capibilities. No, it would not help with sound being transmitted to the office. I do think that there is a ceiling covering that would compliment the rest of the shop.
Hope this helps
Good Luck,
John A.

[Log in to Reply]  [No Email]
old

01-22-2004 18:28:54




Report to Moderator
 Re: Status Report in reply to Allan, 01-22-2004 17:59:06  
Looks to good to be a grease jockeys shop



[Log in to Reply]  [No Email]
Ken

01-23-2004 06:51:50




Report to Moderator
 Re: Re: Status Report in reply to old, 01-22-2004 18:28:54  
It's very nice . But unbelievable that a guy would spend so much time & money on a garage that'll eventually have oil , grease , hot sparks from welding & torching splattered around it's interior . You should make this your recreation room & build a garage to WORK in .



[Log in to Reply]  [No Email]
Mike M

01-23-2004 07:20:35




Report to Moderator
 Re: Re: Re: Status Report in reply to Ken, 01-23-2004 06:51:50  
I wonder if it was done this way so he has a nice dog house for his wife to send him to ? I wish I had one !



[Log in to Reply]  [No Email]
T_Bone

01-23-2004 14:39:21




Report to Moderator
 Re: Re: Re: Re: Status Report in reply to Mike M, 01-23-2004 07:20:35  
Hi Allen,

Extreamely nice looking shop. You know for the last shop one will ever have, that wasn't so spendy after all.

I mean look at this way. Some kind of wall covering was to be used, what? $300 on the cheap side, so thats $1000 more than you would normally spend.

The smile it will bring every time you open the shop door

Priceless!

T_Bone



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy