Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

When did this happen?

Welcome Guest, Log in or Register
Author 
James in North

12-29-2003 12:45:53




Report to Moderator

I was in Home Depot today to get a pair of tongue and groove pliers and sledge hammer. I started looking at a number of Husky tools. Everyone of them was made in China. HD always made a big deal of Husky being made in the USA.

The Husky pliers, hammers, some of the sockets were all marked "Made in China". On top of that, they weren't much less expensive then American made stuff.

I ended up buying a Vaughn hammer and Channellock
pliers.

When did Husky start making their stuff in China? James

[Log in to Reply]   [No Email]
Mark in AB

01-03-2004 09:00:19




Report to Moderator
 Re: When did this happen? in reply to James in North Carolina, 12-29-2003 12:45:53  
I get a kick out of these discussions about overseas manufacturing and mexico manufacturing and job loss. no one who is going to pay double the price for a product of equivelent or close quality made in country. The main reason for manufacturing in these foreign countries besides low low overhead is lack of any environmental laws. They can beltch toxic chemicals to the atmosphere till the cows come home. Thats why almost all steel foundry for north america is done in mexico. Brilliant poitics isn't it.. SELLING ELECTRIC CARS IN CALIFORNIA WHILE THEIR NEXT DOOR NEIGHBOR BELTCHES EVERY ILLEGAL TOXIC CHEMICAL KNOWN TO MAN INTO THE ATMOSHERE MAKING PRODUCTS FOR THESE SUPOSSIDLY ENVIROMENTALLY FRIENDLY PRODUCTS. IS THERE NO WIND BETWEEN CALIFORNIA AND MEXICO... NUFF SAID

[Log in to Reply]  [No Email]
bob

01-01-2004 03:06:01




Report to Moderator
 Re: When did this happen? in reply to James in North Carolina, 12-29-2003 12:45:53  
Just bought a set of Ingersol impact sockets from Northern. I thought for sure they would be made in USA. Wrong! Taiwan. They look good quality though.



[Log in to Reply]  [No Email]
HJP

12-31-2003 18:47:38




Report to Moderator
 Re: When did this happen? in reply to James in North Carolina, 12-29-2003 12:45:53  
BOUGHT A FEW SCREW DRIVERS FROM H.D. NEVER AGAIN SOFT STEEL ,STRIPPED THE SCREW HEADS
NOTHING MATCHES MY SNAP ON VAPOR BLASTED TIP SCREW DRIVERS, THEY GRIP LIKE A PAIR OF VISE GRIPS.



[Log in to Reply]  [No Email]
Mike

12-30-2003 14:57:35




Report to Moderator
 Re: When did this happen? in reply to James in North Carolina, 12-29-2003 12:45:53  
The US has priced itself out of the global economy with its tarrifs,ridiculous wages and benefits,now you are seeing the results.The guy in China is putting out just as many,if not more widgets per day for $4/hr than his US counterpart at $20./hr plus benefits. If you compare apples to apples the quality is the same,if not better,and the $16./hr difference in labor translates to lower prices,not necessarily quality.

[Log in to Reply]  [No Email]
bob

01-02-2004 07:07:58




Report to Moderator
 Re: Re: When did this happen? in reply to Mike, 12-30-2003 14:57:35  
quality don,t even compare and if you consider safety price is not a factor. years ago we bought pipe flanges from China purchasuing agent said same. Naught. we had to replace all as other plants had them explode as castings were pourous poor workmenshipand materails. one of these days the beancounters will learn.Menards pipe fittings are all china and you can only hope to get them tight if all the threads are used bottoming them out I won,t buy anymore.I don,t like to go back and redo job Sorry for the long rant

[Log in to Reply]  [No Email]
scotc

12-31-2003 15:14:55




Report to Moderator
 Re: Re: When did this happen? in reply to Mike, 12-30-2003 14:57:35  
ever buy chinese brake rotors? very very poor metalurgy over there.



[Log in to Reply]  [No Email]
NOT $4/hr - .4/hr

12-31-2003 11:33:36




Report to Moderator
 Re: Re: When did this happen? in reply to Mike, 12-30-2003 14:57:35  
As per a recent Newsweek article - Workers in a chinese co. makeing Disney items - 80 to 120 per month - 10-11 hrs per day 6 days per week. Worker there feel great - average salary is less than 70. Let's see @ $120 (upper end) divided by 240 hrs per month = .50 cents per hour. The Mexican president recently complained about the " non existent wages" in china. The Mexicans are lucky to get $3 - $4 per hour. They can't compete! Maufacturing wages have always been higher than service or government jobs. At some point, who carries the water here? My2c Irv

[Log in to Reply]  [No Email]
Rod (NH)

12-30-2003 18:52:03




Report to Moderator
 Re: Re: When did this happen? in reply to Mike, 12-30-2003 14:57:35  
Hi Mike,

Good point. I am not ready to buy into the "just more profit for greedy companies" claim just yet. I am sure there is some of that but nothing is ever perfect. Yesterday I purchased a small (10 gal) electric hot water heater. I investigated two basic sources. The first was a plumbing supply wholesaler who would also sell to the general public. The unit was made in USA by State Industries in Tennesee. The price was $380 with $80 that could be "discounted" to me as a guy just off the street :o). Total cash and carry was $300. I then went to Home Depot and looked at one of the same capacity made by Rheem Manufacturing in Mexico and marketed under the GE brand name. Cash and carry price was $150. The two units are essentially identical. Same specifications, same capacity, same warranty (6 yrs). After personally inspecting both units I could not find a single thing that would suggest one as having a higher quality than the other. This particular instance was not a matter of a few dollars more for American made quality. It was a LOT more for no noticeable difference. The doubters will say "wait and see, you will sing a different tune when the thing dies prematurely". Well maybe. But I could buy two for the price of one at the cost difference.

I also bought some brass pipe fittings. Unfortunately, I noticed, made in China. I have to say though that the quality seemed excellent and the price very reasonable, considering brass. Pieces were individually wrapped and the threads were clean cut and mating was excellent. The general finish was superb. I have bought similar fittings in years past (presumably made in USA - not sure though) where some threads were not that clean cut and mating had to be obtained with a wrench, even initially (or threads chased).

I hate to see US manufacturing constantly going overseas with the resulting loss of jobs here. I am as patriotic as the next guy, perhaps more so, and would love to always support American made products...but there is a limit. As long as the quality is equivalent or better (or at least adequate for the task) and the price significantly less, I simply can't AFFORD to. Such is the plight of most consumers in today's competitive world. That's why the parking lots are always full at places like Home Depot and WalMart. And that there are always more employees than customers in one other competing business that I am familiar with...I saved $100 on a $300 nail gun by buying at Home Depot rather than at that business. Exact same model from the same manufacturer. No quality issue here at all. Such is life. Unfortunate situation, but I have no solution to effectively turn things around.

third party image Rod

[Log in to Reply]  [No Email]
Ben in KY

12-31-2003 09:43:43




Report to Moderator
 Re: Re: Re: When did this happen? in reply to Rod (NH), 12-30-2003 18:52:03  
I just bought a 40 GAL water heater at Lowes. 150.00 Made in USA ( Tennessee ). Shop around, you don't have to get ripped off buying USA made products.



[Log in to Reply]  [No Email]
Rusty Jones

12-31-2003 14:31:35




Report to Moderator
 Re: Re: Re: Re: When did this happen? in reply to Ben in KY, 12-31-2003 09:43:43  
When did the mfgrs. decide to send their manufacturing to Mexico, China, Taiwan, etc? After the US Government said they had to pay many benefits, hospitalization, unemployment, all kinds of stuff, they couldn't hire part time help without all of the fore-going benefits! To make a small part, or anything, it cost so much that they couldn't make a profit, the prices of their product was so much higher than the imports, that it wouldn't sell! So, Reagan had the mfgrs in for meetings, got the free trade agreement started, and nafta, and they found out they could ship the raw materials to China, or where-ever, have it made there, ship it back, pay no import tariffs, only shipping, and they would make more profits, and wouldn't have to pay the benefits to the American workers! And, of course there had to be some "vigorish" in there somewhere! so, the "greedy" American worker is left out of the loop, and he has to work for relative peanuts! I went over to Sears last week. They had a nice motorcycle jack for sale--made in China! RATS! And Wal-mart--everything made in China! Lots of luck finding a good paying job! RJ

[Log in to Reply]  [No Email]
clinton signed it

01-01-2004 06:02:15




Report to Moderator
 Re: Re: Re: Re: Re: When did this happen? in reply to Rusty Jones, 12-31-2003 14:31:35  
Do alittle research on who was in office when NAFTA took affect, wasnt Reagan...



[Log in to Reply]  [No Email]
scotc

01-01-2004 21:14:21




Report to Moderator
 Re: Re: Re: Re: Re: Re: When did this happen? in reply to clinton signed it, 01-01-2004 06:02:15  
NAFTA wasn't the big milkpump vaccuum for jobs like perrott said it was, more like a dustbuster, slower but it still does the same thing.



[Log in to Reply]  [No Email]
mj

12-30-2003 17:40:35




Report to Moderator
 Re: Re: When did this happen? in reply to Mike, 12-30-2003 14:57:35  
Would you define a NON-ridiculous wage for a U.S. citizen, please? One that you would be happy with.....



[Log in to Reply]  [No Email]
Ron in NY

01-01-2004 06:09:22




Report to Moderator
 Re: Re: Re: When did this happen? in reply to mj, 12-30-2003 17:40:35  
Yes. Our plant has dropped from 3600 people to 300 people with all jobs going to Mexico. Our wage rate with benefits is $40 without $20. with a wage rate of $9 and benefits of $7 the transport would suck up the savings of moving.

The rest of the world is coming on line with their manufacturing power, with the Chinese being the latest to give up their oppression of captialism. We will have to compete with this

[Log in to Reply]  [No Email]
RandyB

12-30-2003 11:40:35




Report to Moderator
 Re: When did this happen? in reply to James in North Carolina, 12-29-2003 12:45:53  
Put your money where your mouth is and buy Wright Tools made in Ohio. Just be sure to bring plenty of money.



[Log in to Reply]  [No Email]
James in North Carolina

12-30-2003 11:45:04




Report to Moderator
 Re: Re: When did this happen? in reply to RandyB, 12-30-2003 11:40:35  
I did put my money where my mouth is. That's why I passed on the Husky's and bought Channellock and Vaughn. James



[Log in to Reply]  [No Email]
scotc

01-01-2004 21:19:27




Report to Moderator
 Re: Re: Re: When did this happen? in reply to James in North Carolina, 12-30-2003 11:45:04  
channelock still makes a lot of stuff in the USA, right out here in meadville PA too, but they have someone get killed every couple years because they bypassed some safety feature on their presses.



[Log in to Reply]  [No Email]
Joseph

12-30-2003 09:24:12




Report to Moderator
 Re: When did this happen? in reply to James in North Carolina, 12-29-2003 12:45:53  
I work for one of the biggest distributors of industrial supplies in the country. We've gotten to be this big by selling quality items with good service at a competitive price. Well apperently, our "leaders" here think that it would be a better idea to buy cheap China goods and sell them under the same part numbers that we've been selling domestic goods under for the same price. The theory is that the customers might not notice and even if they do, who cares. Exactly what is happening at home depot with husky tools, most people won't notice. The thought is that we are big enough now that we can afford to lose some customers over this. Meanwhile, we are actually dumping domestic suppliers left and right and they are the ones that buy alot of product from us and the ones that helped us when the times were tough going early on. It's all about the margins and the stock holders. Never about American pride and keeping things local. Cheap, cheap, cheap for the customer and more money for the corporation. Another 10 years of this and there won't be much of an american economy left. Then who is going to buy the cheap products when everybody is unemployed because their job was in one way or another affected by the sellout to cheap China manufacturers. It affects every business in some way or another so if you think your job is safe, it might be now but it probably won't be in the future. Consumers have the ability to stop it but they chose not to, just to save a buck at Wally world. Even on these boards I see people talking about walmart all the time. I just don't understand why anybody would shop there? Most must be uninformed or just don't care about America! Walmart is one of the biggest problems. They account for 1% of the entire chinese economy. Sad when one company can purchase that much in foreign goods and nobody in the purchasing country really cares. Just think about it next time you decide to swing into ole wally world and buy that cheap product. Spending a couple extra bucks at the next store can help. Just try it! You can help change the way things work!

[Log in to Reply]  [No Email]
KX

12-30-2003 09:13:39




Report to Moderator
 Re: When did this happen? in reply to James in North Carolina, 12-29-2003 12:45:53  
I guess trying to undercut their competition took more priority than trying to keep USA built tools....I like to shop in Lowes better anyway but they will have to go to cheaper tools to keep up with home despot. It is a downward spiral we the consumer have little control over. Things are not going to get any better. If they can't cut quality to cut price, I have noticed lately that cutting quantity has become a trend. For years and years i have bought 94 lb bags of Portland cement. Now you get 92.5 lb bags but has the price came down? NO. It seems at first 1.5 less lbs is not much but if you look at millions of sacks of this, it adds up. I could name a bunch of items that are built cheaper than they used to be but sell now at same or higher price, tee posts, cattle panels, barb wire, we are doomed to making do with cheap inferior junk.

[Log in to Reply]  [No Email]
Jim M (RI)

12-30-2003 07:24:23




Report to Moderator
 Re: When did this happen? in reply to James in North Carolina, 12-29-2003 12:45:53  
It is a shame to see everything going overseas. But we the consumer must share some of the blame. If we all went to any store and only bought American made goods, there would be no market for the stuff made in China, etc. But when we go in a buy the other stuff just to save a dollar, we are supporting their greed. I won't buy anything if it says made in China, Shrilanka, etc. I'm sure there is a lot of stuff I do buy that I don't know where the components came from but I still feel better. God Bless the USA!

[Log in to Reply]  [No Email]
cannonball

12-30-2003 05:52:25




Report to Moderator
 Re: When did this happen? in reply to James in North Carolina, 12-29-2003 12:45:53  
i think you will find all companys are doing this ..it is called GREED..that is what is driving the big companies...have nice day may god bless



[Log in to Reply]  [No Email]
You forgot India

12-30-2003 05:08:55




Report to Moderator
 Re: When did this happen? in reply to James in North Carolina, 12-29-2003 12:45:53  
You boys are a little behind on your current events, nobody has mentioned India yet. They are number 2 in steel forgings, big stuff like cranks and connecting rods. Most major diesel engines now have parts in them made and machined in India. If your Cat Cummins, John Deere big engines do not contain parts made in India they soon will have.



[Log in to Reply]  [No Email]
Gary

12-30-2003 10:04:33




Report to Moderator
 Re: Re: When did this happen? in reply to You forgot India, 12-30-2003 05:08:55  
Its not just parts. My company just completed a backup generator installation for one of the local telecommunications companies. The owner provided the equipment. It was a 600kw genset made by Cummins India!



[Log in to Reply]  [No Email]
treeboy

12-30-2003 04:20:24




Report to Moderator
 Re: When did this happen? in reply to James in North Carolina, 12-29-2003 12:45:53  
i do not go to home deploit, they also import there lumber, their philosphy on timber management in the good ole USA is not my cup of tea, not that any of the other big chains do much different, atleast they don't make a big deal out of it... the american way, if ya can get it from somewhere else, that's where to get it, so much for home made(lumber, steel, crops, fuel) phew!
i'm ok now



[Log in to Reply]  [No Email]
Roger

12-29-2003 21:16:16




Report to Moderator
 Re: When did this happen? in reply to James in North Carolina, 12-29-2003 12:45:53  
Sadly, some of it is not even made in China, but in North Korea and then rebadged. We do not want to even think about the kind of working conditions in those places.



[Log in to Reply]  [No Email]
scotc

12-29-2003 20:31:16




Report to Moderator
 Re: When did this happen? in reply to James in North Carolina, 12-29-2003 12:45:53  
when the money behind walmart gave lowes a big kick and they started making everything in china. If walmart were a country they would be china's 5th largest trading partner. Craftsman's are still made in USA they mailed me a socket out of my tool set that was missing when i bought it, came straight from the tool shop in carolina, what one i cant remember wish i woulda saved that envelope



[Log in to Reply]  [No Email]
Van

12-30-2003 09:51:37




Report to Moderator
 Re: Re: When did this happen? in reply to scotc, 12-29-2003 20:31:16  
I bought a Craftsman 3/4" socket set in the early 80's that was on sale. All of the sockets and handles are marked "made in tiawan" with the same part numbers as the american stuff. I have broken a couple of sockets and they were replaced by american ones. I think Sears experimented with the overseas stuff and found out they were loosing many customers and came back to the USA made tools. Maybe Lowes will learn this lesson too, I know Wally World won't, but I dont care, cause I wont by their tools anyway.

[Log in to Reply]  [No Email]
HJP

12-31-2003 18:55:09




Report to Moderator
 Re: Re: Re: When did this happen? in reply to Van, 12-30-2003 09:51:37  
I HAVE A COUPLE OF STANDARD BOX/ OPEN END "CRAFTSMAN"WRENCHES MADE IN "TIAWAN" 7/16,1/2 USE THEM ALOT AND SEEM "BEEFYIER" MOST LIKLY FROM THE CHEEPER STEEL.
HAVEN'T BROKE ONE YET



[Log in to Reply]  [No Email]
jake

12-30-2003 09:26:42




Report to Moderator
 Re: Re: When did this happen? in reply to scotc, 12-29-2003 20:31:16  
Suprise I bought a 3/4" drive extention marked CRAFTSMAN "MADE IN TIWAN" looks great and don't think I can break it still made over there.



[Log in to Reply]  [No Email]
Fred OH

12-30-2003 08:51:12




Report to Moderator
 Re: Re: When did this happen? in reply to scotc, 12-29-2003 20:31:16  
I've got a set of Craftsman sockets that I'm in question about. The orientals put a big chamfer on the back of their sockets leading into the square opening...(and front). No other manufacturer in the USA does this...but this set has it. I'm guessing they might have been made in the orient and labeled as "made in USA"! Do we Americans make "blow mold cases?" I certainly have my doubts about this set. Anyone else notice this on some of their Craftsman socket sets? Who ever made it...it is the most poorly designed box to get tools out of and if you turn it upside down...or carry it with the built in handle some of the sockets can fall out of position with the case closed. It's the set that has 1/4-3/8 and 1/2" ratchets and a couple of sets of SAE and metric sockets and a screwdriver type driver with sockets and bits. The plating is also poor as it has worn off of the push button socket release and the reversing lever on the ratchets with only a minimal amount of use. I was gonna take this set back to Sears and dam*ed if someone didn't trade one of the ratchets and put in a lame one...it's a Sears but different pattern...probably wouldn't take it back then. I certainly have had good luck with Craftsman tools and have never taken one back that I broke...it was usually due to me using it wrong (after thinking about it) and my guarantee about using them is just as fair as Sears is about replacing them. I've used them for 40 years. Fred OH

[Log in to Reply]  [No Email]
scotc

12-31-2003 15:10:41




Report to Moderator
 Re: Re: Re: When did this happen? in reply to Fred OH, 12-30-2003 08:51:12  
i'd try taking that set back, tell em you broke the ratchet and it was replaced with that one, they may buy it, Neighbor took a u-shaped 3/8 ratchet back and told them it wouldn't tow the cement mixer home like the ad said it would, they replaced it.



[Log in to Reply]  [No Email]
Dave H (MI)

12-29-2003 18:55:06




Report to Moderator
 Re: When did this happen? in reply to James in North Carolina, 12-29-2003 12:45:53  
My clients who are into machine tools tell me that a LOT of our manufacturing is going there.
The chinese make it cheaper. A lot of people are taking it in the neck but we demand a good economy from Washington and they meet our demands...at any cost.



[Log in to Reply]  [No Email]
buck

12-29-2003 16:28:31




Report to Moderator
 Re: When did this happen? in reply to James in North Carolina, 12-29-2003 12:45:53  

Was in Southern States getting feed today and they had one of them come-a-long cable and ratchet jobs laying on the counter out of the box as someone was apparently looking at it. "CONSUMER GRADE" in big letters on the box and made in china. I'm thinking who's life is going to be intrusted to that. Almost getting to the point where it is nice to see made in mixico or tiwan.



[Log in to Reply]  [No Email]
poor tom

12-29-2003 16:23:37




Report to Moderator
 Re: When did this happen? in reply to James in North Carolina, 12-29-2003 12:45:53  
Just read about Ridgid Tools. Just bought by a Chinese company. See pg. 34 of the new Tools & Shops magazine (by Fine WoodWorking). No more lifetime warranty.



[Log in to Reply]  [No Email]
Ken

12-29-2003 16:20:44




Report to Moderator
 Re: When did this happen? in reply to James in North Carolina, 12-29-2003 12:45:53  
About 23 years ago when, caterpillar, Deere, and the big three got together and collectivly killed the forging business in the USA, with the help of the Reagan administration I might add.



[Log in to Reply]  [No Email]
The gift that keeps on gi

12-29-2003 16:03:26




Report to Moderator
 Re: When did this happen? in reply to James in North Carolina, 12-29-2003 12:45:53  
When wages are very low (Mexico) or nonexistent (China) it becomes very hard for businesses to ignore it. Especially if your competition goes that route. Do you ship the jobs to China or go out of business? In Michigan the state Government is trying do something about the loss of manufacturing jobs. It doesn't look very good. When is it you turn? My2c Irv



[Log in to Reply]  [No Email]
KURT

12-29-2003 15:41:43




Report to Moderator
 Re: When did this happen? in reply to James in North Carolina, 12-29-2003 12:45:53  
Most stuff (consumer products) are made in China. Sad aint it. I will say that Chinese tools are not as good as USA, I know this because I took a 3/4" wrench (made in China) and was using it on an allen wrench (made in USA) and I bent the wrench about 45degrees from straight. (I am not kidding with that comment). Luckily that wrench belonged to my employer. I bet that wrench was a little cheaper than the USA one. Now the wrench is worthless. Our throwaway society demands junk at a good price, too bad.

[Log in to Reply]  [No Email]
Slowpoke

12-29-2003 14:20:26




Report to Moderator
 Re: When did this happen? in reply to James in North Carolina, 12-29-2003 12:45:53  
When they found out that they could increase profits by a wide margin.



[Log in to Reply]  [No Email]
WORKN4ALIVIN'

12-29-2003 21:12:26




Report to Moderator
 Re: Re: When did this happen? in reply to Slowpoke, 12-29-2003 14:20:26  
And now we know why it's spelled "JUNK DEERE"



[Log in to Reply]  [No Email]
MT Pockets

12-30-2003 12:43:16




Report to Moderator
 Re: Re: Re: When did this happen? in reply to WORKN4ALIVIN', 12-29-2003 21:12:26  
Does anyone remember about 13 years ago somebody named Ross Perot warning us about NAFTA? He said we were going to here a giant sucking sound as American manufacturing companys moved their plants to foreign countries.I think we should have kept the plants and sent the politicians(Slick Willie and friends)to the foreign countries. Just my opinion. What is your opinion? Thanks. MT.



[Log in to Reply]  [No Email]
Matt

01-02-2004 11:00:32




Report to Moderator
 Re: Re: Re: Re: When did this happen? in reply to MT Pockets, 12-30-2003 12:43:16  
Sending business to other North American countries (North American Free Trade Agreement...) is a good thing.

I'd much rather see a strong & prosperous Mexico than a strong & prosperous China.



[Log in to Reply]  [No Email]
Irv

12-30-2003 13:37:55




Report to Moderator
 Re: Re: Re: Re: When did this happen? in reply to MT Pockets, 12-30-2003 12:43:16  
Yeah, but what about bush - his family are big investors in china?



[Log in to Reply]  [No Email]
paul

12-31-2003 10:49:14




Report to Moderator
 Re: Re: Re: Re: Re: When did this happen? in reply to Irv, 12-30-2003 13:37:55  
We should be too - join, rather than fight a losing battle..... Manufaturing is going to China, agriculture is going to south America. Too high wages, taxes, & regulations in North America.

You & I won't change that. We either find a nitch market for what we do; work for the service industry; or work for the government.

That is the future.

--->Paul



[Log in to Reply]  [No Email]
Irv

12-31-2003 11:44:51




Report to Moderator
 Re: Re: Re: Re: Re: Re: When did this happen? in reply to paul, 12-31-2003 10:49:14  
Sadly you are right, we won't change that. I hope this works itself out for most people, I don't see a real future for a lot of young people. I am 49 and will hopefully be able to hang on til retirement with GM. However, nothing is guaranteed. Before I got into GM I worked for several small companies, all tool & die. All are gone. As production has gone overseas, so does the service industry that supports them. Now even tool design is being done overseas. A few years ago there was a big issue of tech workers working from home. Now that is a dead issue. Any job that can be done from home in anywhere, usa can be done from anywhere INDIA! A lot of service jobs are now being sent out now too. Where does this stop? How much can our economy absorb? I doubt that anyone really knows. I think it might be quite a shock when we find out in a couple of years. My 2c Irv

[Log in to Reply]  [No Email]
Paul in Mich

12-31-2003 18:29:47




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: When did this happen? in reply to Irv, 12-31-2003 11:44:51  
Its easy to throw blame around and there is plenty of it, from labor unions being constantly at odds with management instead of the partnership that would produce positive results, but taxes and regulations are more to blame for driving manufacturing overseas. Our tax code is so convoluted that that it takes a whole staff of cpa's plus legal experts for a company to comply with our tax laws, and at a tremendous cost, mostly to the consumer. Also regulations are punitive to the point that companies throw up their hands and those that can move overseas where the EPA and OSHA, and other regulatory tyrants don't tread. All these things drive the cost beyond global prices. All of us want goods and services for as low cost as possible, but we cant get that if we pay exorbant prices for American made goods. We also have to reinvent ourselves constantly. We cant just resogn ourselves to losing our jobs and collecting as much unemployment comp as possible and then hope our jobs are comming back....some jobs just arent comming back. Many reasons for this. First, there are some goods that we dont use anymore. If someone is waiting for a job building typewriters or Telephone operator switchboards, it aint gonna happen. We also are a very efficient work force. The production figures in the US are through the roof with fewer peopleused to produce those goods. The fact is that since 1975, 1/4 of all the jobs in existence in the US were non existant 25 yrs ago. We all want cheaper goods, but we all have to do what it takes to ensure that we can make them here in the Good old USA. Tarrifs only help a few people, but higher cost to the customer costs us all, even the workers they were intended to help. Steel workers helped out by tarrifs will pay more for their refrigerator, washer, car, lawnmower just like the rest of us do.

[Log in to Reply]  [No Email]
Irv

12-31-2003 23:04:52




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: Re: When did this happ in reply to Paul in Mich, 12-31-2003 18:29:47  
Paul, Idon't see regulations or government interference as a prime mover these days. The local and state governments bend over backwards to give tax breaks to the companies. The most recent example is the compressor plant in Greenville mi. The locals are offering to build a new plant, for the swedish corp. Free! But they aren't taking it. Labor in greenville at $12-15 per hour is no match for mexicans @ $2 per hour. This plant has 2700 workers. Rough guess on my part - Electrolux will save 100 million a year. Every year. Most of these corps now practice pretty sophisticated enviornmental programs - they don't want to accused of destroying the envionment, anywhere. And the foriegn governments are offering similar financial incentives. If you took all the regulations away, I don't think that it would save many jobs. The labor differential is just too great. imho Irv

[Log in to Reply]  [No Email]
Tree Farmer

12-31-2003 16:36:40




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: When did this happen? in reply to Irv, 12-31-2003 11:44:51  
Since the union jobs have gone overseas, Unions have targeted State, County and Local governments and the taxpayers don't even know what happened. In our small - poor community, the employess have 4 days paid holidays for Christmmas and New Years plus anothe dozen during the year, have full health insurance including dental and optical (cost $900.00/employee per month), get 3 personal paid days off, paid vacation day for their birthday, 3 paid funeral days, dont use their 13 days sick leave per year because they let it accumulate and get up to $40,000 extra when they retire, and the list goes on. It may be just in the union state of michigan, but I would bet it's happening everywhere. No work is done anymore, because all the money is needed to pay salaries and benefits. And these are Public Servants? Not.

[Log in to Reply]  [No Email]
Irv

12-31-2003 22:51:14




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: Re: When did this happ in reply to Tree Farmer, 12-31-2003 16:36:40  
You are dead on about the union targeting public service jobs - mostly were uionized anyway, small unions. The largest local in the UAW is local 6000 - a Lansing local for state workers. I am not crazy about paying my taxes either, but I will give the public service people this: most I have met do try to do thier jobs. There are always some bad apples, union or not. My2c Irv



[Log in to Reply]  [No Email]
Irv

01-01-2004 14:25:07




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: When did t in reply to James in North Carolina, 01-01-2004 08:51:25  
I don't think that state employees can strike here either. Some, like the state police have had "blue flue" epidemics. I know that our teachers are among the higheset paid in the country, but we seldom see a strike there either. The state has a mandatory 180? day schedule. If they miss time in the start of the year, they have to make it up later. Considering all the education and the teaching enviornment, I think they probably earn thier money. One thing I get tired of seeing is rants against teachers, other public employees that have no basis other than jealeasy. Some people should look in the mirror once in awhile. My 2c Irv

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy