Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Speaking of wrenches

Welcome Guest, Log in or Register
Author 
John K

11-18-2003 22:11:16




Report to Moderator

I was reading the previous posting on wrenches when I thought of the first wrench set I got when I was 7 or 8 years old. The set was crude by todays standards but they are still special, they bring back memories and more important, the feeling I got when I got the wrenches for my birthday.. I still have them in my tool box, not bad for getting them 45 years ago. Anyone have any similar experiances.

[Log in to Reply]   [No Email]
TommyP

11-20-2003 14:56:22




Report to Moderator
 Re: Speaking of wrenches in reply to John K, 11-18-2003 22:11:16  
I got a tool story with a twist but it didn't involve wrenches. Back in the early sixties when I was about 9, my mother gave me a few dollars to buy my dad a gift. He was an Ironworker and I bought him a nice metal "cub scout" flashlight. I was hoping he would open the gift and give it back to me since I was in the scouts. I really was buying it for me. After he died in the eighties I was cleaning out the gang box on the back of his truck and to my surprise, I found the flashlight. It must been used thousands of times as the blue and gold paint was well worn but the flashlight didn't have any dents of other damage as you would expect in that line of work. I had long forgotten about it and used it for years. When I got divorced, I left it with my ex for my 6 year old son to keep. He is 13 now and has never seen the light so to speak. Moral of the story: tools and ex's don't mix.

[Log in to Reply]  [No Email]
James in North Carolina

11-19-2003 18:50:15




Report to Moderator
 Re: Speaking of wrenches in reply to John K, 11-18-2003 22:11:16  
I still have the 12 ounce claw hammer my dad got me when I was 7. When I was 12, he had me start roofing houses with him in the summers. I think I drove thousands of nails with that hammer and the only thing wrong with it now is the rubber handle cover is cracked.

I also still have a can of grease my dad gave me. He bought it in the 1950's and used it from time to time when he didn't grab one of his other cans of grease. James

[Log in to Reply]  [No Email]
JD-Tractor inn NY

11-19-2003 16:55:01




Report to Moderator
 Re: Speaking of wrenches in reply to John K, 11-18-2003 22:11:16  
Sheared Christmas trees when I was 15 in exchange for a John Deere H tractor, brought tractor home and went to Western Auto and bought a set of wizard wrenches ,still have and use most of them, have worked on equipment for a living ever since. Am now 55



[Log in to Reply]  [No Email]
RJ-AZ

11-19-2003 15:58:51




Report to Moderator
 Re: Speaking of wrenches in reply to John K, 11-18-2003 22:11:16  
I got out of the Army in 1971 and was in town getting a haircut and asked the barber if he knew of any work available. This was when the town barber knew aerything going on. He said the John Deere shop foreman was in earlier saying he needed a mechanics helper. I applied and he asked if I had my own tools and I said I had a few. When he said he would put me on I went up to the Farmers Union CO-OP and bought a Farm set of Thorsen tools on my dads account. Of course he and his mechanics looked at me kind of funny when I was peeling the wrappers off the next morning. That was a long time ago and as they say the rest is history.

[Log in to Reply]  [No Email]
Dan Z

11-19-2003 15:52:37




Report to Moderator
 Re: Speaking of wrenches in reply to John K, 11-18-2003 22:11:16  
I have been giving my kids some sort of quality tool for every Christmas and birthday since we brought them home from the maternity ward. They are still young but they are amassing a fine collection of good tools. I only hope that I am creating the memory that you speak of.



[Log in to Reply]  [No Email]
CLAYTON IN FL

11-19-2003 10:31:08




Report to Moderator
 Re: Speaking of wrenches in reply to John K, 11-18-2003 22:11:16  
ALSO REPLACEMENT FOR BROKEN TOOLS IS NO QUESTIONS ASKED. EVEN IF THEY SEE ABUSE.



[Log in to Reply]  [No Email]
Mac

11-19-2003 08:44:28




Report to Moderator
 Re: Speaking of wrenches in reply to John K, 11-18-2003 22:11:16  
Dad had a bunch of ford wrenchs he passed on to me. Also some R.R. "Monkey wrenchs", with wood grips. But I have one wrench that I have and dont know what it is. Flat and about 12" long. The open end looks like an open alligators mouth? V shaped, and has ridges on the inside of both jaws. Will fit anything from a 3/16 nut to about a 3/4 or more nut. Any ideas what this is called????



[Log in to Reply]  [No Email]
John Garner

11-19-2003 19:20:14




Report to Moderator
 Re: Re: Speaking of wrenches in reply to Mac, 11-19-2003 08:44:28  
Mac --

You can take you choice of names for that type of wrench . . . most common seems to be "alligator wrench", but "crocodile wrench" and "bulldog wrench" are also used.

John



[Log in to Reply]  [No Email]
Steve from Tn

11-19-2003 18:30:51




Report to Moderator
 Re: Re: Speaking of wrenches in reply to Mac, 11-19-2003 08:44:28  
Mac, I always called that wrench an alligator wrench, exactly what it looks like. I have one somewhere. You reminded me of it. Haven't seen it in years. Gonna look for it.



[Log in to Reply]  [No Email]
Mac

11-19-2003 18:58:24




Report to Moderator
 Re: Re: Re: Speaking of wrenches in reply to Steve from Tn, 11-19-2003 18:30:51  
Steve, I do believe that is right. I CRS anymore, but at 69, I can remember working on my junk bicycle with it at the age of maybe 10 or so. Back then a guy was lucky to have even had that, or maybe a pair of pliers and a hammer. Thanks.



[Log in to Reply]  [No Email]
George

11-19-2003 07:33:21




Report to Moderator
 Re: Speaking of wrenches in reply to John K, 11-18-2003 22:11:16  
When I was around 5 years old in the early Fifties, my father bought a Craftsman Tool Box Set. To keep me out of his tool box, he "lent" me the 1/4" drive set in its small metal box to play with. Believe me, nothing was safe which was held together with 7/16 and under nuts! Still have a few of the sockets and an extension from that set in the roll-around in my shop. Thanks for reminding me about them.

[Log in to Reply]  [No Email]
John K

11-19-2003 07:57:03




Report to Moderator
 Re: Re: Speaking of wrenches in reply to George, 11-19-2003 07:33:21  
I was wondering how many great menories I would jog.



[Log in to Reply]  [No Email]
John K

11-19-2003 07:58:18




Report to Moderator
 Re: Re: Re: Speaking of wrenches in reply to John K, 11-19-2003 07:57:03  
I ment memories



[Log in to Reply]  [No Email]
Rauville

11-19-2003 05:24:14




Report to Moderator
 Re: Speaking of wrenches in reply to John K, 11-18-2003 22:11:16  
My favorite wrench is a 18" Cresent that my Dad bought after getting out of the Navy in 1945. He very neatly put his name into the tapered handle by arc welding, and grinding down the letters. Even though the original owner is gone, this old wrench remains a constant remainder of the honesty, and hard work ethics of an earlier generation.



[Log in to Reply]  [No Email]
Indydirtfarmer

11-19-2003 03:20:09




Report to Moderator
 Re: Speaking of wrenches in reply to John K, 11-18-2003 22:11:16  
I was about 10 years old, when my dad got REAL bent out of shape over me loosing some of his tools. He bought me a few "cheap-o's" at K Mart. Kroughter brand. I still have them. The box wrenches are still in everyday use. I have a Snap-On "war wagon", full of their tools. They stay in the shop. (Locked up) The old stuff stays on the truck, and gets used out in the field. I'd still feel mighty bad, if I ever lost one though. John

[Log in to Reply]  [No Email]
moonlite

11-19-2003 05:01:56




Report to Moderator
 Re: Re: Speaking of wrenches in reply to Indydirtfarmer, 11-19-2003 03:20:09  
I take my best to the field and leave my everyday ones in the shop. While working in the field i HAVE to get the job done with what i have. I also have some relly junk ones I carry in tractor tool boxes.



[Log in to Reply]  [No Email]
Jim was in UK

11-19-2003 03:01:47




Report to Moderator
 Re: Speaking of wrenches in reply to John K, 11-18-2003 22:11:16  
In 1977, I bought a Craftsman Tool Set. The tool box is long gone now, but the tools were and still are used today. Still have the majority of the set, and they are in good condition.

Jim



[Log in to Reply]  [No Email]
stan

11-19-2003 01:28:08




Report to Moderator
 Re: Speaking of wrenches in reply to John K, 11-18-2003 22:11:16  
I bought a set of SK sockets 1/2" drive. This was back about 1959, when I was 16 years old.(dam I'm getting old) I still have most of them. Stan



[Log in to Reply]  [No Email]
Fawteen

11-19-2003 04:17:59




Report to Moderator
 Re: Re: Speaking of wrenches in reply to stan, 11-19-2003 01:28:08  
I got a set of 3/8 drive SK's for Christmas when I was 16. That's a bit more than 35 years ago, and I still have 'em and use 'em every day. Did manage to miplace the ratchet, but everything else is in my toolbox at work.

On the other hand, I've broken TWO Crapsman sockets so far this week. I'll trade 'em in next time I'm near a Sears, but I don't believe I'll be investing any more money in Crapsman tools.

[Log in to Reply]  [No Email]
Gary in TX

11-19-2003 06:02:52




Report to Moderator
 Re: Re: Re: Speaking of wrenches in reply to Fawteen, 11-19-2003 04:17:59  
Ok, how big of a cheater bar were you using on the ratchet or break over bar when you broke the sockets??? Craftsman is the main brand, well bout the only brand in my tool box. Had very little trouble with anything. If you use your tools sooner or later something is going to have to get replaced and I believe that is going to happen more with operator error than tools providing you are using a good brand, LIKE CRAFTSMAN!

[Log in to Reply]  [No Email]
KX

11-19-2003 08:27:21




Report to Moderator
 Re: Re: Re: Re: Speaking of wrenches in reply to Gary in TX, 11-19-2003 06:02:52  
I agree Gary, I especially like the replacement policy of Craftsman. I broke a big socket that was in the tools my Grandfather left me, could have been 50 years old. I took it to Sears and they immediately threw it in a bucket and got me a brand new one. After I had the new one, the guy looked at me and said I bet you were barely using the one you broke. I told him, no I was abusing the h3ll out of it.....which I was. He just smiled and nodded.

[Log in to Reply]  [No Email]
Fawteen

11-19-2003 07:52:05




Report to Moderator
 Re: Re: Re: Re: Speaking of wrenches in reply to Gary in TX, 11-19-2003 06:02:52  
Not that I've never done that, but in this case I wasn't. 1/2" drive sockets with a breaker bar that was maybe 30" long.



[Log in to Reply]  [No Email]
Chester

11-19-2003 07:25:48




Report to Moderator
 Re: Re: Re: Re: Speaking of wrenches in reply to Gary in TX, 11-19-2003 06:02:52  
My tool collecting began around 1950 when I saved my (Edmonton, AB) paper route money to buy a SK 1/4" drive socket set (from S.S. Kresskge) in a little green metal box that is still used ocasionally. A couple of sockets are in need of replacement, but that style is no longer made, being the set is so old. Other tools were picked up off the road, hammers, combination wrenches and even a double ended adjustable (made by Cresent Tools) etc. All still in use today. Have added many more over the years from garage sales, found in auto wrecking yards, and have even bought some new.

[Log in to Reply]  [No Email]
John K

11-19-2003 07:53:26




Report to Moderator
 Re: Re: Re: Re: Re: Speaking of wrenches in reply to Chester, 11-19-2003 07:25:48  
Hi Chester are you still in Edmonton, I'm in Red Deer.



[Log in to Reply]  [No Email]
Chester

11-20-2003 15:11:20




Report to Moderator
 Re: Re: Re: Re: Re: Re: Speaking of wrenches in reply to John K, 11-19-2003 07:53:26  
Hi John K.

Not any longer, last forty years I have been in Montreal and Toronto. Was in Edm in Sept. for a wedding though.

Chester



[Log in to Reply]  [No Email]
Dan Z

11-19-2003 16:05:03




Report to Moderator
 Re: Re: Re: Re: Re: Re: Speaking of wrenches in reply to John K, 11-19-2003 07:53:26  
I am from Red Deer. Live in Texas now.



[Log in to Reply]  [No Email]
Alvin n Ms.

11-19-2003 07:16:10




Report to Moderator
 Re: Re: Re: Re: Speaking of wrenches in reply to Gary in TX, 11-19-2003 06:02:52  
I bought a set of Craftsman tools in the mid 50s, and they are still being used. $39.00 for box and great set of tools. That was pay for two weeks of hard work.



[Log in to Reply]  [No Email]
CLAYTON IN FL.

11-19-2003 10:28:49




Report to Moderator
 Re: Re: Re: Re: Re: Speaking of wrenches in reply to Alvin n Ms., 11-19-2003 07:16:10  
CRAFTSMAN WRENCHES RULE.
I BOUGHT A CRAFTSMAN 7AND 1/4 CIRCULAR SAW AND A 3/8 DRILL IN 1968 STILL GOING STRONG AND HAVE BEEN USED AND ABUSED. JUST BOUGHT A NEW LASER CRAFTSMAN SAW , VERY ACCURATE.



[Log in to Reply]  [No Email]
Jerry

11-19-2003 17:40:39




Report to Moderator
 Re: Re: Re: Re: Re: Re: Speaking of wrenches in reply to CLAYTON IN FL., 11-19-2003 10:28:49  
Wife bought me a 1/2 drive craftsman set in 1957. Still use them every day.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy