Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Stuck Air Brakes

Welcome Guest, Log in or Register
Author 
SteveB

10-07-2003 05:07:36




Report to Moderator

Do any of you fellas know what to do when air brakes get locked up? I bought a GMC 7000 With a 20 ton equipment trailer as a package. Truck and trailer have air brakes. Upon driving my investment home " about an hour away" the trailer brakes started to smoke bad. I pulled off and noticed the trailer brakes on two wheels where hanging up. I pounded on the drums with a ball peen, but they diddnt loosen. Anyway to make a long story short, I blew the drive shaft apart trying to break the brakes loose. 500$ tow bill 200$ drive shaft. Air brake fix? Thanks for any feed back. Steve

[Log in to Reply]   [No Email]
Gene Davis(Ga.)

10-09-2003 19:12:35




Report to Moderator
 Re: Stuck Air Brakes in reply to SteveB, 10-07-2003 05:07:36  
Answer is simple, Don't see where any one mentioned the fact that when air brake shoes wear out the cam flips over and the brake action is reversed and there fore are applied all the time when the pedal is up !!!!! !!!!



[Log in to Reply]  [No Email]
Greywolf

10-10-2003 04:19:07




Report to Moderator
 Re: Re: Stuck Air Brakes in reply to Gene Davis(Ga.), 10-09-2003 19:12:35  
It might be as simple as that, but one did lead to the possiblity before, OK hinted maybe..LOL.

In reality, it could several different possibilities. A stuck S cam, a rusty can, faulty spider valve, over center shoes. Maybe something even as simple as the johnson bar pulled and the driver not aware of it too. Although in this case with only one axel affected it's unlikely. Leads to spring brake problems, MAYBE!!!!! !!!!! !!!!! Usually all 4 on a trailer are spring brakes tho.

Heck it could even be an older one without spring brakes and the hoses are reversed also.

The main thing here is this,

IF one has no knoweldge of air brake systems, get help from someone that knows what they are doing instead of diving in blind. Possibilities exist to be seriously injured or worse without even seeing the possibility!!!!! !!!!! !!!!!

[Log in to Reply]  [No Email]
markct

10-08-2003 08:55:35




Report to Moderator
 Re: Stuck Air Brakes in reply to SteveB, 10-07-2003 05:07:36  
those spring chambers are dangerous, if rusty they can fail at any time, at a shop i worked at they had one that they had removed from a truck about a year before cause it was badly rusted, it was sitting on the bottom shelf of some wooden bookshelf type shelves, well about a year later one night it just blew up, no one was around luckly, i think it must have rusted just enough more from the moisture in the shop, and it let go and went right thru the end of the shelf, knocking it to bits, and put a decent dent in the plywood wall about 10 feet away. not something that i would want to have happen while laying under a truck.

[Log in to Reply]  [No Email]
Greywolf

10-07-2003 19:23:53




Report to Moderator
 Re: Stuck Air Brakes in reply to SteveB, 10-07-2003 05:07:36  
Depends on what state he lives in. Minnesota if used for farm use within a certain radius, don't need a CDL for it.

in order to move the trailer to a repair shop. You can use a 9/16 wrench with a hammer on the adjustment nut on the slack adjuster to break the tension and loosen the brakes up. Will have to be careful as no trailer brakes, but will get you a shop without a tow anyway.

If it's been sitting for a while....my guess would be stuck spring brakes. The rest are right DO NOT attempt to service them if you never have before. Don't even ask over the net as to how. Be show by a qualified repair person to learn how.

[Log in to Reply]  [No Email]
Jailkeeper

10-07-2003 17:44:04




Report to Moderator
 Re: Stuck Air Brakes in reply to SteveB, 10-07-2003 05:07:36  
I agree with Willie on everything if you have S-cam brakes.

If you have wedge brakes, the same principles apply, but the wedges may be froze up, which will require removing the brake chambers to get them cleaned up.

I've rebuilt lots of chambers on spring brakes, yes they're dangerous, but I've never had an accident with any. If the chamber is rusty at all, don't take chances with it - throw it away and buy new ones.

[Log in to Reply]  [No Email]
WIlLie J

10-07-2003 06:24:28




Report to Moderator
 Re: Stuck Air Brakes in reply to SteveB, 10-07-2003 05:07:36  
Steve
Not much to go on, but will try. Got any air leaks?? Could be that a spring cannister not releasing. Another possibility is that the shoes on the wheel that is locked are worn thin, letting the cam go "over center". 1- block the wheels so things don't roll away.
2- build up full pressure in truck tanks
3- push in the RED knob
4- crawl under trailer
5- check all push rods/slack adjusters. they should all be retracted.
6- if one is out further than the rest, tap with a BFH to see if it will retract.
7-if successful this far, jack up & try to spin the affected wheel
8-if you hear any air leaks,STOP NOW!!!!! !!!!!, & call a truck shop. SPRING CANISTERS CAN KILL IF TAKEN APART WRONG. A service call is a lot cheaper than a funeral!!
BTW, you are aware that if the rig is over 10000 lbs gross, (the truck is that heavy by itself), you need a combination(class A) license with air endorsement to drive it, even empty. Cops will put you "out of service" where it sits, requiring a proper licensed driver or tow to move it.
E-mail for more info. HTH
Willie

[Log in to Reply]  [No Email]
RJ-AZ

10-07-2003 08:02:11




Report to Moderator
 Re: Re: Stuck Air Brakes in reply to WIlLie J, 10-07-2003 06:24:28  
Willie's got you on the right track there. You need to verify that your truck system is working properly and that your air pressure and volume are right. Check your glad hand fitting gaskets as well for proper sealing. And get a CDL drivers manual and learn the proper walkaround inspection and air brake system test. And DO NOT attempt to disassemble any part of a brake chamber without proper training or special tools. They can be removed as an entire unit of course. And yes a unit this size requires a CDL license.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy