Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Mcculloch chain saw parts needed

Welcome Guest, Log in or Register
Author 
Roger

08-02-2003 12:11:33




Report to Moderator

I need throttle parts for a Mcculloch Pro Mac 700 chain saw. This is my dad's saw and he says he can't find the parts. The saw, he says, is about 20 years old. Any help would be appreciated.

Thanks

Roger




[Log in to Reply]   [No Email]
Seve Kozak

10-04-2003 09:12:20




Report to Moderator
 Re: Mcculloch chain saw parts needed in reply to Roger, 08-02-2003 12:11:33  
Does anyone have a 16 Inch McCulloch Self sharpening replacement blade? Also are there any sharpening stones available? My PowerMac 340 needs a new blade after 15 years, and they're not very common any more. Any suggestions on where I might find one?



[Log in to Reply]  [No Email]
T. white

04-03-2006 18:47:35




Report to Moderator
 Re: Re: Mcculloch chain saw parts needed in reply to Seve Kozak, 10-04-2003 09:12:20  
I have a McCullock 619 chain saw

Model No. 600041F
Serial No. 12-054826

I am in need of an Air filter - can you help me with this?

I have never ordered or asked for any thing on the internet - I do not understand your terms. Is there a charge for this information? Please let me know?



[Log in to Reply]  [No Email]

04-21-2006 10:10:04




Report to Moderator
 Re: Re: Mcculloch chain saw parts needed in reply to T. white, 04-03-2006 18:47:35  
HOW DO i GET A REPLY -- i DON'T KNOW WHAT TO DO



[Log in to Reply]  [No Email]
Jim

09-11-2003 14:09:29




Report to Moderator
 Re: Mcculloch chain saw parts needed in reply to Roger, 08-02-2003 12:11:33  
Need A coil for A old McCulloch Power Mac 6 chin saw
Can any one help?



[Log in to Reply]  [No Email]
Greg C.

08-02-2003 14:48:36




Report to Moderator
 Re: Mcculloch chain saw parts needed in reply to Roger, 08-02-2003 12:11:33  
I wouldnt give up on it just yet. I run all old saws mostly Pioneers. You can find the parts but its takes some digging around. Ebay is a good source. Might try asking on this site

Link

Also here is a site with some usefull info on the 700.

Link

Good luck! If you cant find anything alot of stuff can be fabricated easily.

[Log in to Reply]  [No Email]
Roberta Pacini

10-14-2003 19:47:29




Report to Moderator
 Re: Re: Mcculloch chain saw parts needed in reply to Greg C., 08-02-2003 14:48:36  
I broke the plastic, trigger release button on my Mini Mac chain saw. Can I get a replacement? The saw still works, but I have to manipulate the trigger so the saw will keep running.



[Log in to Reply]  [No Email]
Rod (NH)

08-02-2003 13:53:43




Report to Moderator
 Re: Mcculloch chain saw parts needed in reply to Roger, 08-02-2003 12:11:33  
Hi Roger,

I hate to tell you this but I think it's time your Dad junked that McCulloch and graduated to either a Stihl or a Husky. I used to be a big McCulloch fan years ago. Matter of fact I still have three of 'em, now junkers. Last one I bought new was about 25 years ago. The sad fact is that great american company went from one of the best in the world to one of the worst over a few short years.

I doubt very much you will be able to find the correct parts. If you do find 'em new they will cost many times what they are worth. I bought a muffler for one of mine about 12 years ago from "old stock on hand"...cost me about $40. In hindsight it was waste of good money! Perhaps you could find the parts you need in an old junkpile from an old dealer or chainsaw service shop. Provided you could find one that still kept such stuff.

In short, you would have to love that McCulloch an awful lot to try and keep it alive. Junk it now and don't look back. I did that to mine about three years ago and have never regretted it.

third party image Rod

[Log in to Reply]  [No Email]
jim

08-06-2003 13:33:02




Report to Moderator
 Re: Re: Mcculloch chain saw parts needed in reply to Rod (NH), 08-02-2003 13:53:43  
I do not know their address, but their is a company called Wallenburg sales in California that has bought up a lot the old McCulloch stock at the aucton.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy