Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum

NEEDLE VALVE for wis

Welcome Guest, Log in or Register
Author 
rusty

03-01-2003 19:42:52




Report to Moderator

i recently bought a wisconson 2cyl model thd motor. the needle idle adjusting valve and spring were missing. the auto store could not sell one unless i bought the whole carburator kit. anybody know where i can buy one? thanks
[email protected]




[Log in to Reply]   [No Email]
Wayne

03-01-2003 23:09:15




Report to Moderator
 Re: NEEDLE VALVE for wis in reply to rusty, 03-01-2003 19:42:52  
If it's been setting a while, missing parts or not, I'd just go ahead and invest in a kit and rebuild it. In my experience, if you don't, as soon as you try to start it you'll find it leaking gas everywhere. Worst case you buy the kit, use the needle and spring, and save the other parts for later..... Just one mans opinion.



[Log in to Reply]  [No Email]
Bob

03-02-2003 15:15:44




Report to Moderator
 Re: Re: NEEDLE VALVE for wis in reply to Wayne, 03-01-2003 23:09:15  
Hi

Goto go with Wayne on this one. Been my experience- By a used tractor, sitting for a while.
Pump up tired, charge battery, fresh gas, rebuild
carb with a KIT - try and start tractor..

Have a great spring

Bob



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy