Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Restoration & Repair Tips Board

W-9 head bolt sequence?

Welcome Guest, Log in or Register
Author 
Mike Loerzel

10-08-2003 08:44:50




Report to Moderator

I have a 1950 McCormick W-9. Recently the head gasket blew. I need the head bolt tightening sequence. Is this motor a 335 CI or 350 CI? Its got to be somewhere around there. If anyone can help please shoot me an email! Thanks!!




[Log in to Reply]   [No Email]
Joe Evans

10-09-2003 06:47:41




Report to Moderator
 Re: W-9 head bolt sequence? in reply to Mike Loerzel, 10-08-2003 08:44:50  
The W-9 is 335 CID. The Super WD-9 is 350 CID. There was no Super W-9.

Just a guess, but don't you normally begin with the center bolts of a head and then progress toward the ends alternating right and left of the centers using an X pattern?



[Log in to Reply]  [No Email]
Allan Currie

10-12-2003 21:32:43




Report to Moderator
 Re: Re: W-9 head bolt sequence? in reply to Joe Evans, 10-09-2003 06:47:41  
Yep! Joe is correct.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy