Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Restoration & Repair Tips Board

Pto grinds when trying to engage

Welcome Guest, Log in or Register
Author 
Dennis Gaddy

04-19-2008 09:00:30




Report to Moderator

New holland 3010_ can not get PTO to engage even after pushing the clutch down, it just grinds like something is spinning too fast to engage. How can this be repaired?




[Log in to Reply]   [No Email]
mark from the fort

04-24-2008 19:04:08




Report to Moderator
 Re: Pto grinds when trying to engage in reply to Dennis Gaddy, 04-19-2008 09:00:30  
I know on a couple of my Ferguson's, it helps to have the throttle all the way down to idle to allow the pto to engage without grinding.
Maybe this will help buy ya some time.
Mark



[Log in to Reply]  [No Email]
J Schwiebert

04-19-2008 19:50:09




Report to Moderator
 Re: Pto grinds when trying to engage in reply to Dennis Gaddy, 04-19-2008 09:00:30  
Is a 3010 Fiat built? If so there are adjustments on the clutch. I did the Fiats 30 years ago and you had to check the adjustments as they change with wear.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy