Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Restoration & Repair Tips Board

over running clutch

Welcome Guest, Log in or Register
Author 
wally b

11-15-2007 12:45:10




Report to Moderator

I am going to run a thresher with a horse powered sweep power. Since the thresher cylinder is essentially a flywheel I need an over running clutch so that when the horses stop the machine wont drive the sweep arms into the back legs of the horses.
I was wondering if an old silage cutter or haybine would have an overrunning clutch on it I could use. Does anyone have a good suggestion?

Thanks

wally

[Log in to Reply]   [No Email]
Opa A

11-21-2007 09:10:01




Report to Moderator
 Re: over running clutch in reply to wally b, 11-15-2007 12:45:10  
New holland small square balers have a simple over running in the driveline just in front of the flywheel. Would be very easy to adapt to your application. There are many of these units in scrap piles in dealer lots etc.



[Log in to Reply]  [No Email]
glennster

11-15-2007 13:37:40




Report to Moderator
 Re: over running clutch in reply to wally b, 11-15-2007 12:45:10  
how bout an overrunning clutch for the 540 rpm pto? farm and fleet sells em for about 50-60 dollars. i have them on my m's for the bush hog. they release very easy, shouldnt be hard to splice one in to the pto shaft.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy