Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Restoration & Repair Tips Board

wondering what to do,?

Welcome Guest, Log in or Register
Author 
Kirk in Ks,

04-15-2007 14:56:15




Report to Moderator

Ok,,, Is it gonna cost me major money to split the case on this W-6?
Or,,, could I do It myself, and MAYBE, JUST MAYBE,SAVE A LITTLE, and get it back together without too much hassle if I had the right tool's?
If anybody's done this,,, then PLEASE GET BACK TO ME ON THIS OK?
I know if I have to take it to someone?
they;ll charge me and arm, and a leg for labor,
All i have is hand tool's and no tranny jack, or way to pull it out from the front end?
Stuck,,,,, ?

[Log in to Reply]   [No Email]
kirk in ks,

04-17-2007 18:55:21




Report to Moderator
 Now,,, I know what to do! Hooray, Hooray! in reply to Kirk in Ks,, 04-15-2007 14:56:15  
To W-6 people out there?
I just found out that you dont have to split the case's on this thing to get to the seal's,
you just open the lid on top of the case and then unbolt it, and then you can get to the seal, no biggy,
(In a matter of speaking?).
The top plate where the belt pulley is come's off,
Then you can get to it much easier that having to do otherwise like an M,
Ohhh Boy what a job that would be to do it to an M,
Like in no word's,,,,
Forget that! I breathed a sigh of relief over this,
also,,, the seal in the front of pump is alot simpler than I thought it was gonna be,

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy