Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tractor Pulling Discussion Forum

farmall 300 motor estimated cost

Welcome Guest, Log in or Register
Author 
pulls red

06-11-2007 10:00:38




Report to Moderator

How much would it cost to have a 300 block machined to accept a 6 inch crank and a 4.375 bore. And how about cost for sleevs and pistons I have everything else.




[Log in to Reply]   [No Email]
AC

06-12-2007 19:47:31




Report to Moderator
 Re: farmall 300 motor estimated cost in reply to pulls red, 06-11-2007 10:00:38  
So, you DO already have a 6.00" crank, then?



[Log in to Reply]  [No Email]
pulls red

06-13-2007 09:21:27




Report to Moderator
 Re: farmall 300 motor estimated cost in reply to AC, 06-12-2007 19:47:31  
Yes I have every thing but sleeves and pistons. I was wondering how much it cost to see if its worth it.



[Log in to Reply]  [No Email]
ChadS

06-12-2007 06:59:34




Report to Moderator
 Re: farmall 300 motor estimated cost in reply to pulls red, 06-11-2007 10:00:38  
I got a 300 block aready bored out with big sleeves ready for finish work. right at 4 inch bore with a thick sleeve. Hard block it, grind it out and its ready. Chad



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy