Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tractor Pulling Discussion Forum

Potential DC Carb

Welcome Guest, Log in or Register
Author 
Screamin DC

01-30-2007 10:21:01




Report to Moderator

Alright, here is the deal. Im looking for a carburetor to put on my 1948 Case DC puller.

-321 cubic inches
-Custom built header, intake manifold, and air cleaner
-Running around 2000-2200 rpm

Any ideas? A friend mentioned to me maybe a Case 830 carb, but looking for some more input before I start scavenging.
Thanks in advance,
Shawn M.




[Log in to Reply]   [No Email]
L.D.W.

01-30-2007 17:24:51




Report to Moderator
 Re: Potential DC Carb in reply to Screamin DC, 01-30-2007 10:21:01  
IH 301 carb, like off 806, combines etc. same flange, can work them over real well, easy to get. Works great on ours, really brought it to life from the stock carb.



[Log in to Reply]  [No Email]
dboll

01-30-2007 13:46:58




Report to Moderator
 Re: Potential DC Carb in reply to Screamin DC, 01-30-2007 10:21:01  
A marvel from a 400-800 ect. can be modified with bigger venturi ect., a zenith from a 262 gleaner combine engine will also work good if you are not limited by flange rules, it is bigger than the DC flange



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy